Temperature Humidity Chamber

Heating and Cooling Thermal Shock Programmable High-Low Temperature Alternate Test Chamber Brief Introduction: Programmable Temperature Chamber is widely used in the temperature variation test, cold resistance test and storage with low-temperature in the foelds of aerospace, aviation, electronics, instrument, electric products, materials, parts and components and equipment to analyze and evaluate the property and performance of the sample under thr simulated conditions. Rapid

Three Zone QT3 Thermal Shock Testing Chamber Brief Introduction: Q1-Test Thermal Shock Test Chamber QT3 Series is used to test products in alternating extremes of high and low temperatures in order to observe changes in product characteristics and failure occurrence,the applicable the object material, including metals, plastics, rubber, electronic, ..., etc., can be used as the basis of its product improvement or reference. QT3 series air-to-air thermal shock chambers

225L Climatic Environmental Thermal Shock Test Chamber Equipment For Metal And Plastic Brief Introduction: Programmable Three Zones Thermal Shock Test Chamber are applicable for testing the changes in physical of the electronic chip IC, PCB, semiconductor ceramic and polymer materials. And composite material and material structure's result which under continuous environment with high temperature or low temperature shock in short time; it means this product can test the

Programmable Cooling and Heating Temperature Cycling Chamber Thermal Shock Test Equipment Brief Introduction: Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. QTS3 series air-to-air thermal shock chambers

80L Three Zones Cold Hot Impact Thermal Shock Chamber For Metal And Plastic Testing Brief Introduction: Programmable Three Zones Thermal Shock Test Chamber is used to test or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber,

Energy Saving Climatic Temperature Thermal Shock Test Chamber by PID Controlled Brief Introduction: Thermal Shock Chamber is an effective tool in subjecting products to a thermal shock test. Thermal Shock Environmental Chambers have a product carrier basket that automatically transports a product under test between separately controlled temperature zones. With built-in viewing windows, users can easily observe the product as it’s transferred between different temperature

Programmable Three Zones Thermal Shock Test Chamber for Plastic and Rubber Material Brief Introduction: Thermal Shock Chamber is an effective tool in subjecting products to a thermal shock test. Thermal Shock Environmental Chambers have a product carrier basket that automatically transports a product under test between separately controlled temperature zones. With built-in viewing windows, users can easily observe the product as it’s transferred between different temperature

Thermal Three-Cabinet Type Shock Testing Chamber with PID Controlled Microprocessor QTS3 series air-to-air thermal shock chambers circulate cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the set point, allowing quicker recovery of the desired condition after transfer, call Mr. Andy Dai 0086-13450058229 or email sales@q1-test.com ask for price. Q1-Test thermal shock test chamber is used to test products in alternating extremes of

High Low Temperature Cycling 3 Zone Thermal Shock Test Chamber with Air Cooling Brief Introduction: Q1-Test thermal shock test chamber is used to test products in alternating extremes of high and low temperatures in order to observe changes in product characteristics and failure occurrence. QTS3 series air-to-air thermal shock chambers circulate cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the set point, allowing quicker recovery

Basket Type 2 Zones Climatic Temperature Thermal Shock Test Chamber with Touch Controller Brief Introduction: Q1-Test Two-zone Thermal Shock Test Chamber QTS2 Series consists of two separately controlled hot and cold cabinets. Testing samples are transferred between the two cabinets for rapid temperature changes. These thermal shock test chambers are ideal for testing small components/assemblies to help find product flaws before leave factory. Main Features: 1, Vertical-lift

High Low Rapid Change Temperature Cycling Climatic Chamber for Accelerated Stress Test Brief Introduction: Rapid change temperature testing specifies a test sample temperature variation rate of 15°C/minute or less, which is the biggest difference between this method and thermal shock testing. Since rapid change temperature testing achieves highly repeatable test results, it is used for compliance testing for standards such as JEDEC (JESD 22-A104B). With the ongoing rise in

Programmable Quick Change Temperature Stability Test Chamber QTH-225KD Microprocessor Control Brief Introduction: Depending on whether the test product is a live load, a larger chamber may be needed to dissipate heat produced by the test subject, adversely affecting the chamber’s pull-down times or humidity system. More active live load products produce their own energy resulting in a larger amount of heat, therefore, will require bigger refrigeration systems to cool the

Energy Saving Climatic Temperature Cycling Environmental Test Chamber by PID Controlled Brief Introduction: Rapid change temperature testing specifies a test sample temperature variation rate of 15°C/minute or less, which is the biggest difference between this method and thermal shock testing. Since rapid change temperature testing achieves highly repeatable test results, it is used for compliance testing for standards such as JEDEC (JESD 22-A104B). With the ongoing rise in

Steady-state Climatic Programmable Rapid Change Temperature Cycling Test Chamber AMBIENT ROOM CONDITIONS: The ambient condition of the room where the chamber will live is very important to make it running. Test chambers create a lot of heat, and with test cycling up and down the temperature spectrum, the chambers themselves require good air circulation. Some units require 18-36 inches (or more) of clearance in all directions to work properly and to provide reliable data. Even

Microprocessor Programmable Constant Rapid Change Temperature Cyclic Test Chamber Rapid change temperature testing specifies a test sample temperature variation rate of 15°C/minute or less, which is the biggest difference between this method and thermal shock testing. Since rapid change temperature testing achieves highly repeatable test results, it is used for compliance testing for standards such as JEDEC (JESD 22-A104B). Rapid change temperature testing is a type of

Laboratory Constant Programmable Environmental Rapid Change Temperature Cycling Chamber Brief Introduction: Rapid change temperature testing is a type of thermal cycling tests developed to improve the failure repeatability of thermal shock tests. With the ongoing rise in issues affecting the reliability of electronic devices and circuit boards, a better-suited evaluation testing method is needed to respond to issues such as higher device operation temperatures resulting from

Programmable Control Constant Temperature Humidity Chamber for Accelerated Stress Testing Air cooled or water cooled? This might be an easy decision: With water cooled condensers, the chamber requires a dedicated conditioned waterline. All chambers can be air or water cooled however water cooled units will lower the temperature in the chamber workspace faster than an air cooled chamber. Condenser Comparison Air Cooled Water Cooled Heat rejection Positive heat rejection Little

Forced Air Damper Three-zone Static Thermal Shock Test Chamber in SUS304 stainless steel Brief Introduction: Q1-Test thermal shock test chamber is used to test products in alternating extremes of high and low temperatures in order to observe changes in product characteristics and failure occurrence. QTS3 series air-to-air thermal shock chambers circulate cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the set point, allowing quicker

Programmable Controller Rapid Change Temperature Test Chamber with Max Rate 20℃/min Brief Introduction: Rapid change temperature testing is a type of thermal cycling tests developed to improve the failure repeatability of thermal shock tests. With the ongoing rise in issues affecting the reliability of electronic devices and circuit boards, a better-suited evaluation testing method is needed to respond to issues such as higher device operation temperatures resulting from

Rapid Temperature Test Chamber ESS Screening Chamber QTH-300SC Brief Introduction: The iqualitrol rapid temperature change test chamber, also known as the temperature cycle test chamber or environmental stress screening (ESS) test chamber, is suitable for environmental stress screening tests. By screening products for environmental stress, it accelerates the discovery of design defects in products and improves product reliability. Technical Specifications: Model QTH-300SC QTH