High Voltage Test Equipment

ZXVLF Series Very Low Frequency High Voltage Generator VLF HV Tester Series Table 1 Model Rated Voltage/current Load Carrying Capacity Power Fuse Tube Product Structure and Weight 30/1.1 30kV/20mA (Peak) 0.1Hz,≤1.1µF 5A Controller:4kg Booster:25kg 0.05Hz,≤2.2µF 0.02Hz,≤5.5µF 40/1.1 40kV/30mA (Peak) 0.1Hz,≤1.1µF 15A Controller:4kg Booster:30kg 0.05Hz,≤2.2µF 0.02Hz,≤5.5µF 50/1.1 50kV (Peak) 0.1Hz,≤1.1µF 15A Controller:4kg Booster:50kg 0.05Hz,≤2.2µF 0.02Hz,≤5.5µF 60/1.1 60kV

20-150mA Three phase four wire Water Internal Cooling Generator Water DC High Voltage Generator Product introduction ZGF-S series is the equipment of testing DC voltage and DC leakage current of water-cooled generator in the situation of water through, which completely overcome the problems of long blow water time, bottom water hard to dry, easy to cause arcing within the coil. The device is light, simple wiring, and easy to read. Polarization compensation voltage is output

Partial Discharge Detector For HV Switch Cabinet, Ring Network Cabinet and GIS Product Introduction : XPD-200L partial discharge detector can be widely used in theater detection of power system, including insulation state detection of high-voltage switch cabinet, ring network cabinet, voltage / current transformer, transformer (including dry-type transformer), GIS, overhead line, cable and other equipment. Main characteristics: Simultaneous interpreting PDsignals of almost

ZGS Automatic DC High Voltage Generator Test Equipment For Zinc Oxide Arresters I. Product Introduction ZGS intelligent DC high voltage generator is widely used in DC high voltage test of electric equipment such as zinc oxide surge arrester, magnetic blow arrester, power cable, generator, transformer and circuit breaker. II.Product fetaures 1. Touch LCD screen. 2. Full automatic MOA test function: good repeatability and high accuracy. 3. Automatic voltage step-up function:

50KVA 100KV Dry Type Test Transformer Withstand Hipot High Voltage Test Equipment Introduction GTB Dry-type Testing Transformer can meet the needs of different users. There are four types which are power frequency ac, ac/dc, ac cascade and ac/dc cascade, it equips with operation unit. The product conforms to the requirement of the standard of “JB-357084 test transformer”. Features 1.Small and light, with compact structure, no oil leakage, maintenance unnecessary. 2.The

High Voltage Test Equipment Non-Partial Discharge High Voltage Test Transformer Equipment With Gas-filled Introduction Compared with the traditional oil-immersed light test transformer, the YDQW series gas-filled non-partial discharge test transformer has a weight reduction of 40-65% (depending on the voltage and capacity level), and there is no oil pollution. The voltage level of a single test transformer can reach 300KV. Due to the new production process, the technical

FRD High voltage Phase Detector Phase Checking is a regular, heavy, dangerous, and indispensable work of the power system. The FRD Wired Hight Voltage Phase Check instrument produced by our company adopts the Principle of the step-down for the metal film; By observing the instrument pointer, it can judge whether the phase is the same, and have the functions of high voltage testing and finding the grounding fault. This series of products have many specifications such as 3kV,

ZXPD-100K Partial Discharge Detector For Switchgear The product, with a portable structure and embedded signal receiving and data processing module, has multiple analysis modes and can conveniently measure the UHF signals and the ultrasonic signals generated by the partial discharge of the electric equipment. Compared with similar products, this product has convenient operation and strong function. Features 1. Applicable scope: the non-intrusive mode is adopted to detect and

ZXPD-200L Partial Discharge Detector ZXPD-200L partial discharge detector can be widely used in theater detection of power system, including insulation state detection of high-voltage switch cabinet, ring network cabinet, voltage / current transformer, transformer (including dry-type transformer), GIS, overhead line, cable and other equipment. Features 1. Simultaneous interpreting PDsignals of almost all electrical equipment with different sensors. 2. Provide time-domain

ZGS Intelligent DC High Voltage Generator ZGS intelligent DC high voltage generator is widely used in DC high voltage test of electric equipment such as zinc oxide surge arrester, magnetic blow arrester, power cable, generator, transformer, and circuit breaker. Features 1. Touch LCD screen. 2. Full automatic MOA test function: good repeatability and high accuracy. 3. Automatic voltage step-up function: test voltage to be preset, the output voltage can keep constant. 4.

ZGF-S DC Hipot Test set for Water-cooled Generator ZGF-S series is the equipment for testing DC voltage and DC leakage current of water-cooled generator in the situation of water through, which completely overcome the problems of long blow water time, bottom water hard to dry, easy to cause arcing within the coil. The device is light, has simple wiring, and is easy to read. Polarization compensation voltage is output directly by the case. 1. Electronic control and tune, easy

ZXYTM-Ⅲ Insulating Boots Gloves Withstand Tester It is applied to test leakage current, insulation aging, power frequency of insulating gloves and boots. This Machine can test 3 pairs each time and tell the leakage current of each pair to find which one is unqualified. There are trundles in the bottom which make it more convenient for moving Features 1. Test with high speed, can improve the efficiency 2. Direct display of voltage and leakage current, auto-identify unqualified

Description This product is mainly designed and made for AC withstand voltage test, such as the cable of 35kv and 110kv, GIS of 35kv and 110kv, and 110kv/63000KVA total insulation of generator transformer. The separated inductor can satisfy the test requirement of high voltage and low current, and can also meet the demand of low voltage like cable of 10kv, it means it has wide range of application. This device is consist of variable frequency control Power Supply, Excitation

ZXYTM-Ⅱ Insulating Boots Gloves Withstand Tester It is applied to test leakage current, insulation aging, power frequency of insulating gloves and boots. This Machine can test 3 pairs each time and tell leakage current of each pair to find which one is unqualified. There are trundles in the bottom which make it more convenient for moving Features 1. Test with high speed, can improve the efficiency 2. Intelligent display the resting results, auto-check the unqualified products

YDQW Series Gas-filled Non-Partial Discharge Test Transformer Compared with the traditional oil-immersed light test transformer, the YDQW series gas-filled non-partial discharge test transformer has a weight reduction of 40-65% (depending on the voltage and capacity level), and there is no oil pollution. The voltage level of a single test transformer can reach 300KV. Due to the new production process, the technical performance of the product has been greatly improved, and it

ZCX(T)C Automatic Test Transformer Controller ZX(T)C Automatic Test Transformer Controller is produced special equipment for light test transformer, easy to maintenance, superior performance, safety and reliability, good structure, durable, easy to move, etc. It is necessary equipment for supply enterprises, large factories, metallurgy, power plants, railways, and another electrical maintenance department. It uses advanced microelectronic processing techniques, all using

XC/TC Pointer Type Voltage Controller for HV Test The control unit is designed to work together with AC/DC High Voltage testing transformer. Features 1. Monitoring high voltage side output & low voltage side current, indicating zero position, operation, Timing 2. Over-current protection, zero-starting protection 3. With the new type of timing relay, the time range is wider 4. Using the latest current relay, more accurate and reliable, and safe 5. Reasonable structure, small

FRC DC/AC High Voltage Divider FRC AC/DC HV Divider is an on-site instrument, which tests both AC and DC voltage. It consists of a voltage divider and LCD display measurement meter. Features 1. Balance type equal potential shield structure. 2. Fully-sealed insulation cylinder with internal excellent components. 3. High accuracy and linearity, good stability, and anti-interference ability. 4. Small size, lightweight, easy to carry in the fieldwork.

ZXGXZ Resonant Test System For Generators ZXGXZ Resonant test system for ZXGXZ Resonant test system for Generators require the use of power frequency voltage withstand voltage, the current national standard factory frequency voltage frequency defined as 45Hz ~ 65Hz, but in many test situations, requirements of a generator are 50Hz plus or minus 2Hz ac testing, and generator stator winding of electric capacity is larger, the domestic most current test unit USES a resonant

ZXBXZ Resonant test system for Cables The AC Resonant Test System for Cables is composed of frequency and voltage modulated power source, exciting transformer, reactor, capacitance bleeder. Features 1. 3 modes: auto search resonance point, auto search resonance point & auto boost, manual test 2. Small size, lightweight, portable design. 3. 220V or 380V input power supply 4. Dry-type epoxy cast for the reactor, nice and reliable. Technical Indicators 1.Rated output voltage: 0