Water Well Drilling Tools

ISO CE Sealed Steel Tooth Tricone Rock Drilling for water wells Tricone Rock Drill Bit Application 12inch API Sealed Steel Tooth Tricone Drill Bit for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations, and achieves high RPM under low to medium WOB application. Characteristics Cutting Structure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit. Gauge Structure Multiple

Best quality API Standard TCI tricone bits and steel tooth roller bits for water well drilling Application Tricone bits, which some may also call roller cone bits or tri-cone bits, have three cones. Each cone can be rotated individually when the drill string rotates the body of the bit. The cones have roller bearings fitted at the time of assembly. The rolling cutting bits can be used to drill any formations if the proper cutter, bearing, and nozzle are selected. Characterist

Introduction PVC slotted (bored) characteristics 1. Resistant erode PVC pipe has stable chemical property, which can resistant most of acid and alkali, 2. Service life long Traditional pipe service life is 20-30 years. PVC pipe service life is at least 50 years at a set temperature and pressure. 3. Excellent sanitary performance PVC pipe is produced by used Tin or Ca/Zn stabilizer, its sanitary performance is full according to GB/T17219 standard and Ministry of Health of the

Specification 83mm Panoramic HD Camera Underground Detection Television Model Configuration Parameter Apply Depth Control Box Depth-Counting Storage Mode Winch Well Pully Camera Model(Dima.) UPM100 100m Standard Digit 32G U Disk Manual Standard 83mm(50 Optional) UPE100 Standard Digit 32G U Disk Electric Standard 83(50 Optional) UPM200 200m Standard Digit 32G U Disk Manual Standard 83(50 Optional) UDE200 Standard Digit 32G U Disk Electric Standard 83(50 Optional) UPM300 300m

Advantages Tensile Strength The tensile strength required can be calculated on the basis of pipe weight. In addition to the pipe weight, gravel that gets stuck in the joints during the assembly and settlement phase should be considered in design calculations. The lower load bearing capacity of screen pipes with slots should be considered when developing the well or when pumping (due to large differences in water level). The effect of such pressures cannot be precisely

Specification Size (Out Diameter) (0.80 Mpa) (1.0 Mpa) (1.25 Mpa) (1.6 Mpa) (2.0 Mpa) mm Inch Weight Thickness Weight Thickness Weight Thickness Weight Thickness Weight Thickness Kgs/m mm Kgs/m mm Kgs/m mm Kgs/m mm Kgs/m mm 40 1.25 0.41 2 0.47 2.4 0.56 3 0.68 3.7 50 1.5 0.5 2 0.58 2.4 0.72 3 0.85 3.7 1.06 4.6 63 2 0.79 2.5 0.95 3 1.15 3.8 1.41 4.7 1.68 5.8 75 2.5 1.07 2.9 1.3 3.6 1.63 4.5 1.9 5.6 2.39 6.9 90 3 1.53 3.5 1.88 4.3 2.33 5.4 2.8 6.7 3.41 8.2 110 4 1.87 3.4 2.23 4

30KN Force Pull Standard Water Well Drilling Tools For Penetration Test Name Standard Penetration Test Structure Light chain/Hand crank on both sides Force of Rated Penetration 3t Depth of Penetration 30m Distance of Penetration 1m Speed of Penetration 0.8-1.3m/min Weight 60kg Fore of Pull 30KN Speed of lifting 0.8-1.3m/min as slow, 4m/min as fast Diameter of Probe 25mm/28mm Length of Probe 1m Material of Probe Seamless alloy steel pipe Diameter of Anchor 200mm/250mm Equipped

API Standard 4 Wings Step Security Drill Bits for Big Diameter / Water Well Drilling Application Drill collar is mainly used for providing drill bits with required drilling pressure, ensuring pull force transmitted to drill pipe and centralize the drill bit. According to API Spec7-1 specifications, the material quality is 4145H that’s after heat treatment, thread hardening treatment and phosphate to better anti-seize. It also can be produced upon customers’ requirements.

API Standard 4 Wings Step Security Drill Bits for Big Diameter / Water Well Drilling Application 12inch Chevron step drill bit is mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling. Types: Ordinary type; Reinforced type; Super strength type. Threads: Any female or male threads.

ISO CE certificatied 4 wings chevron drill bits for Big Diameter Mining / Water Well Srilling Application 4 wings step drag bits are one piece construction of alloy steel cast with tungsten carbide cutting tips and gauge sides to ensure longer life. It has4 wings and 4 flushing holes. 4 wings step drag bits, are more durable and lasting than 3 wings step drag bits, because of cutting structure, but will penetrate more slowly. 4 wing step drag bits are more stable and tend

444.5mm 17 1/2 inch steel tooth rotary drag bit,Three Wing Scraper Step Drag Bits for Soft Formation Application 17 1/2 inch steel tooth rotary drag bit is mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling. The cutting structure is force balanced,non-symmetrical blade and deep

High quality 14 7/8" PDC drag bit for soil formation open hole in water well drilling Application 14 7/8" PDC drag bit is mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling. PDC cutters different features are selected and bit profile design is optimized to suit different drilling

10' Soft Formation Drag Bits with 3 Wings Blades Tungsten Carbide Material Application 10' Soft Formation Drag Bits is mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling. Types: Ordinary type; Reinforced type; Super strength type. Threads: Any female or male threads. Characterist

3 Wings Step Drag Bits for Soft Formation Water Well Mud Drilling 8 inch Characteristics All sizes are generally 3 wings and standard design; Any size of 4 wings or chevron type is upon customer’s request; All sizes connection type are AROD,NROD or standard API thread; Any special size and design is upon customer’s request. Drag bits diameter:76mm to 445mm; Step Drag Drill Bits thread sizes: :2 3/8” API Reg, 3 1/2” API Reg, 4 1/2” API Reg, 6 5/8” API Reg, etc; Application 8'

Factory price upgraded 152mm 6' inch 3 three wings step drag bit with 2 3/8' API Reg pin thread Application Three wings step drag bit is mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling. Types: Ordinary type; Reinforced type; Super strength type. Threads: Any female or male

TCI Tricone Rock Bit/Tri-cone Bit/Roller Cone Bit for water well drilling end hole diameter 10inch Application Rolling cutter bits, which some may also call roller cone bits or tri-cone bits, have three cones. Each cone can be rotated individually when the drill string rotates the body of the bit. The cones have roller bearings fitted at the time of assembly. The rolling cutting bits can be used to drill any formations if the proper cutter, bearing, and nozzle are selected.

12 1/4" 14 3/4" and 20" 535/635 metal sealed tricone bit with roller bearing for borehole drilling on soft formation Application 12 1/4" 14 3/4" and 20" 535/635 metal sealed tricone rock bits 517 mining drilling bits for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations, and achieves high RPM under low to medium WOB application Characteristics Cutting Structure The wear-resistance of teeth is enhanced with premium tungsten carbide

Metal sealed bearing 17' tungsten carbide button tricone rock bits 517 mining drilling bits Application Metal sealed bearing 17' tungsten carbide button tricone rock bits 517 mining drilling bits for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations, and achieves high RPM under low to medium WOB application Characteristics Cutting Structure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth

API sealed bearing Milled tooth tricone rock bit and steel tricone drill bit tunsten carbide for water well Application 14inch API Sealed Steel Tooth Tricone Drill Bit for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations, and achieves high RPM under low to medium WOB application Characteristics Cutting Structure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit. Gauge

ISO CE Sealed Steel Tooth Tricone Rock Bits for Water / Oil / Mining Well Drilling 12inch 305mm Application 12inch API Sealed Steel Tooth Tricone Drill Bit for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations, and achieves high RPM under low to medium WOB application Characteristics Cutting Structure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit. Gauge Structure