Fiber Optic Components

Infrared spectroscopy is one of many common analytical methods used for the detection and measurement of atmospheric pollution. Much of the fundamental research on atmospheric pollution used spectroscopic techniques, as this technology helps us to comprehend various threats to both public health and the environment. MID-IR Refocusing Objectives are designed to refocus the beam from the IR-fiber or into the fiber. The housing of the objective easily connects to fiber optic

Rribbon Protection Sleeves with Double Ceramic Strength Member for Fiber Protection Fusion Splice Sleeve Brief Introduction : Generally speaking, Hicorpwell fiber optic sleeve consists of three parts. The first part is the inner tube made by hot-meltable adhesive. This material can encapsulate the fusion splice joint and provides vibration damping and an environmental seal so as to protect the fiber from damage and contaminants. The second part is a reinforcing strength

The Optical Probe TL-OPUSB-IEC for Electric Meter, Gas Meter, Heating Meter, Water Meter The optical probe TL-OPUSB-IEC for smart metering is an interface for data exchange between a consumption meter (eg, electric meter, gas meter, heating meter, water meter, etc.) and a peripheral device via infrared optical waves. The optical reading head is manufactured in accordance with the standard IEC 62056-21 (IEC 1107) . Our optical probe TL-OPUSB-IEC has on one end an usb type A

Waterproof ANTENNA SMA Female to Ipex Ufl Sma Female to U.FL Cable For production line of concealment and embedded antennas, very small RF connectors are a necessity. These antennas are designed to be integrated into RF systems, vehicles, UAVs, environmental enclosures, concealments, or other small spaces without being visible or easily detected. For these applications where an antenna needs to be installed in a tight space, Hicorpwell relies on micro RF connectors such as U

Passive Components Power Splitter Divider Quick SMA Connector Unit Parameter Min. Typ. Max. Frequency Range(GHz) 2 — 8 Insertion Loss(dB) (With distribution ratio ) — 3.7 4 Isolation(dB) 18 20 — VSWR — — 1.35 Amplitude Balance(dB) — — 0.3 Phase Balance(°) — — 5 Impedance(Ω) — 50 — Connectors — SMA — Power Capacity(W) — 10 — Operating Temperature(°C) -30 normal temperature +70 Physical Dimension(mm,+/-0.1) — 49.6×33.5×12.8 — Weight(g) 30 35 40 Other Power Divider New 2/3/4/8

2 Way Power Splitter Power Divider with S(M)A Connector 0.8-8GHz Power Splitter Power Divider Power Splitters are used in a wide variety of applications and can satisfy almost any requirement where a signal needs to be distributed or combined. Our company offers 2 Way, 3 Way and 4 Way configurations fitted with N, 7/16 DIN Female or SMA Female connectors at all ports. Mainly used in repeater or base station to split, can also be used in indoor distribution system. Parameter

European German Type Hose Clamp Adjustable Germany spring Hose Clamp Description: This kind of strong clamp is mainly used in the connection of soft and hard pipes which need to be very firm or the wall thickness of the hose is relatively thick. It is mainly used in automobile oil pipe, carburetor and engine. After installation. The possibility of loosening in use is very low. The powerful clamp can effectively solve the problems of dead angle and liquid and gas leakage when

Galvanized Fitting Hose Clamp German Type Taiwan Radiator Fastener Tools American pipe clamp 32-76mm Description: This kind of strong clamp is mainly used in the connection of soft and hard pipes which need to be very firm or the wall thickness of the hose is relatively thick. It is mainly used in automobile oil pipe, carburetor and engine. After installation. The possibility of loosening in use is very low. The powerful clamp can effectively solve the problems of dead angle

European stainless steel Heavy Duty Double Bolt Hose Clamp pipe clamp: 20mm 24mm Description: Power-Clamps are designed for heavy-duty industrial hose connections. Double Bolts for heavy duty hose clamp Power-Clamp is configured with two bolts and is fitted with a bridge with raised edges,which prevent shearing of the hose material. Hicorpwell Power-Clamps are suitable for many applications. Feature: (1)Bigger adjusting range (2) Evenly stress when fastening (3) Wrest

70-80 mm & 75-85mm Double Bolts for heavy duty hose clamp (Stainless Steel 304) Description: Power-Clamps are designed for heavy-duty industrial hose connections. The 70-80 mm & 75-85mm Double Bolts for heavy duty hose clamp Power-Clamp is configured with two bolts and is fitted with a bridge with raised edges, which prevent shearing of the hose material. Hicorpwell Power-Clamps are suitable for many applications. Material: Screw: M8 x 60/80, DIN 912, W1 (8.8) Band 25mm width

70-80 mm & 75-85mm Double Bolts for heavy duty hose clamp (Stainless Steel 304) Description: Power-Clamps are designed for heavy-duty industrial hose connections. The 70-80 mm & 75-85mm Double Bolts for heavy duty hose clamp Power-Clamp is configured with two bolts and is fitted with a bridge with raised edges, which prevent shearing of the hose material. Hicorpwell Power-Clamps are suitable for many applications. Material: Screw: M8 x 60/80, DIN 912, W1 (8.8) Band 25mm width

Stainless Steel Tri Clamp Heavy Duty High Pressure Equipment Pipe Clamp Description: An embedded embrace hoop, it is the right and left halves join after embrace hoop involution, left and right half piece are in semicircle ring, the hoop bending outward on both ends of the half circle, which formed an installation ears, whose character is: the left piece at the end of the hoop as stated in the mounting ears open caulking groove, the corresponding, coupled with the right piece

RF Attenuator DC-3GHz Attenuator 100w Coaxial Attenuator 3dB RF Attenuator DIN Male to Female for IBS&BTS​ RF Attenuator (DC-3GHz, 100W, 4.3-10 M/F) DC-3GHz RF Attenuator is wide frequency band(2G/3G/4G/LTE Coverage), 100W RF Attenuator is high power and widely used in IBS &DAS system. Product Features ◆ Wide Frequency Band DC-3GHz ◆ Low VSWR ◆Low Attenuation Accuracy ◆ Widely used for In-building Solutions Technical &Mechanical Specifications Model No. M-100-4MF-03 M-100-4MF

LC Duplex PVC Single-mode Fiber Loopback Module Cable for Data Center Hicorpwell Loopback Modules are designed for testing and engineering purposes. Our Fiber Loopback Module is designed to provide a media of return patch for a fiber optic signal. Typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a

SC/UPC Duplex PVC (OFNR) OM4 50/125 Multimode Fiber Loopback Module Hicorpwell SC APC Loopback Modules are designed for testing and engineering purposes. Designed to provide test engineers with an effective way of testing the transmission capability and receiver sensitivity of optica Product Detail Keywords OM4 SC UPC Loopback Module Application FTTH/Area Network/Test Equipment Fiber Type MM Fiber 50/125 ; Type Loopback Module, MM-SC UPC Minium Purchanse 10 units Application

SC/UPC Duplex PVC (OFNR) OM1 62.5/125 Multimode Fiber Loopback Module Hicorpwell SC APC Loopback Modules are designed for testing and engineering purposes. Designed to provide test engineers with an effective way of testing the transmission capability and receiver sensitivity of optica Product Detail Keywords SC UPC Loopback Module Application FTTH/Area Network/Test Equipment Fiber Type MM Fiber 50/125 ;62.5/125 Type Loopback Module, Singlemode-SC Minium Purchanse 10 units

LC/UPC Duplex PVC (OFNR) OM1 62.5/125 Multimode Fiber Loopback Module Hicorpwell SC APC Loopback Modules are designed for testing and engineering purposes. Designed to provide test engineers with an effective way of testing the transmission capability and receiver sensitivity of optica Product Detail Keywords LC UPC Loopback Module Application FTTH/Area Network/Test Equipment Fiber Type MM Fiber 50/125 ;62.5/125 Type Loopback Module, Singlemode-SC Minium Purchanse 10 units

SC/APC-FTTH SM Blue Key T1 Pinout Plug Vs Tester Module Cable Loopback Plugs Hicorpwell SC APC Loopback Modules are designed for testing and engineering purposes. Designed to provide test engineers with an effective way of testing the transmission capability and receiver sensitivity of optica Product Detail Keywords SC APC Loopback Module Application FTTH/Area Network/Test Equipment Fiber Type 9/125um SM Fiber or MM Fiber 50/125 ;62.5/125 Type Loopback Module, Singlemode-SC

FTTH Single-mode LC Pcie Loss Has No Attribute Module Cable Loopback Plugs Hicorpwell Loopback Modules are designed for testing and engineering purposes. Designed to provide test engineers with an effective way of testing the transmission capability and receiver sensitivity of optica Product Detail Keywords Loopback Module Application FTTH/Area Network/Test Equipment Fiber Type 9/125um SM Fiber or MM Fiber 50/125 ;62.5/125 Type Loopback Module, Singlemode-SC Minium Purchanse

The Fiber Collimator Series 60FC-T Devices for Launching Collimated Light into The Fiber The fiber collimator series 60FC-T is designed for collimating radiation exiting from an optical fiber cable or used in reverse as a fiber coupler (fiber port) for coupling a beam into an optical fiber cable. It has an integrated TILT adjustment to prevent aberrations from vignetting or clipping. Large beam diameters: Focal lengths up to 200 mm Choice of monochromats or achromats Various