Type 2 Surge Protection Device

40kA 275V surge voltage protector tvss spd Type 2 surge arrester Type 2 surge arrester Features: Main character 1. One-phase protection for TN-S system 2. Pluggable module, easy for installation and maintenance 3. High discharge capacity, quick response 4. Double thermal disconnection devices, providing more reliable protection 5. Green window will change when fault and also provide remote alarm control at the same time Type 2 surge arrester Technology characteristic: BR-40

YH1.5W 0.28/1.3 distribution type Low voltage metal oxide Surge Arrester lightning arrester low-voltage arrester Product Description: Product Characteristic 1. Small size,Light weight,resistance to impact,no collision damage during transportation,flexible installation,suitable for use in the switch cabin. 2. Special structure,the overall compression molding,no air gap,good sealing performance,moisture-proof and explosion-proof 3. Large creepage distance,good hydrophobicity

385V Lightning Arrester 110KA Lightning Protection Application: 1) Three phase power SPD is suitable for system power protection, such as switching room, power distribution cabinet, switch cabinet, AC distribution board, etc. 2) For using in the lightning protection zones concept at boundary 1-2. 3) Distribution box with outdoor input in the building and each floor 4) AC power line of house, bank, and telecom tower and so on. 5) Low voltage industrial and civil power grid 6)

40kA 4 poles surge arrestor single phase lightning surge protector We can produce according to your requirements. Contact us get the lowest price 4 poles surge protect device Features: Voltage protection level Up upto 2.5 kV, suitable for protection of all terminal equipments. A surge protection device (SPD) or simply a surge protector is a device used to ensure protection against transient surges. It is used to protect the household and commercial applications from voltage

4P 40KA SPD Safe Low Voltage surge suppressor Features: 1. Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage.2. Cheap price surge protection device (SPD)3. Flame retardant shell, fire proof, and safe to use.4. Type 2 and Class II test level5. Removable assembly, easy to plug and unplug.6. Nominal discharge current 20kA with max. discharge current of 40kA accordingly7. DIN rail installation, simple operation. 4P 40KA SPD

BRITEC 2P Class II SPD 60kA T2 Surge Arrester AC surge lightning protector surge protection device We can produce according to your requirements. Contact us get the lowest price Type 2 Class C Surge Protection Device Features: Advantage 1:Over 20 years experience in production and processing; 2:faster product innovation, production specialization, timely delivery, 3:Strict quality inspection procedure BRITEC Type 2 Class C Surge Protection Parameters: Model Name BR275-60 3P+1

BRITEC 2P Class II SPD 60kA T2 Surge Arrester AC surge lightning protector surge protection device We can produce according to your requirements. Contact us get the lowest price Type 2 Class C Surge Protection Device Features: Voltage protection level Up upto 1.5 kV, suitable for protection of all terminal equipments 2 DIN-rail mounting and plug-in module design allow for easy installation and maintenance 3 Gas tube module option for type TT grounding systems 4 5 year

BRITEC 2P Class II SPD 60kA T2 Surge Arrester AC surge lightning protector surge protection device We can produce according to your requirements. Contact us get the lowest price Type 2 Class C Surge Protection Device Features: 1 Three position terminals provide remote status monitoring capability 2 DIN-rail mounting and plug-in module design allow for easy installation and maintenance 3 Gas tube module option for type TT grounding systems 4 5 year warranty Main character 1

BRITEC 2P Class II SPD 60kA T2 Surge Arrester AC surge lightning protector surge protection device We can produce according to your requirements. Contact us get the lowest price Type 2 Class C Surge Protection Device Features: The surge protector is provided with a fail-safe device. When the protector breaks down due to overheating, the fail-safe detach device can automatically detach from the power grid and give an indication signal.When the protector is normal, the display

Class II Lightning Protection Type 2 SPD 40Ka Surge Protective Devices Description: • Intensity of Remote Signaling Alarm Contact • Type 2 or Class II test level • Failure indication • Nominal discharge current 20Ka with Max. discharge current of 40kA • High discharge capacity and low residual voltage • 4 Pole SPD • Over-temperature protection • DIN rail mounting, easy installation, compact size, good performance • IP20, UL94 V0 Class II Lightning Protection Type 2 SPD 40Ka

40kA surge arrestor single phase surge protection device spd manufacture spd manufacture Features: Type 2 surge arresters are available in different types and voltages and are ideally suited for a.c., d.c. and PV applications. · Response time: ≤25ns. · Max. backup fuse: 125A · Failure indication. According to EN 61643-11 spd manufacture Technology characteristic: BR-40 1P+1 Max. continuous operating a.c. voltage Uc(L-N/N-PE) 275V/255V (50/60Hz) Nominal discharge current (8

40kA 275V tvss spd manufactur Type 2 single phase surge protectors Type 2 surge arrester Features: Imax 20kA, 40kA and 80kA Up 1kV, 1.4kV and 1.5kV Uc (a.c/d.c) 75V, 150V, 275V, 380V, 440V, 600 V and 760V Type 2 Surge Protective Device—Type 2 SPDs are intended for installation on the load side of the service equipment overcurrent device, including SPDs located at the branch panel. Type 2 surge arrester Technology characteristic: BR-40 2P Max. continuous operating a.c. voltage

40kA 275V surge voltage protector tvss spd Type 2 surge arrester Type 2 surge arrester Features: Protecting low-voltage consumers' installations against indirect lightning discharges High performance varistor with thermal disconnection tripping device Plug-in module/base design facilitate replacement of a failed module without the need to remove system wiring etc. Protection class: Type 2,Class II Pole number:1P,2P,3P,4P,1+1,3+1 optional surge protectors are used to guard

4P Surge Protector 40KA Surge Arrester SPD 4 Pole 275V Surge Protective Device 4P Surge Protector 40KA Surge Arrester SPD Features: • The surge protection device BR-40 4P meets the type 2 requirement class according to IEC 61643-11. • Three-phase protection for TN-S system • The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. • Pluggable module, easy for installation and maintenance • Visual status

20ka Surge Protection SPD Lightning Arrester Product Description: • BR-20 Series surge proteccion spd are suitable for AC 50/60Hz, IT, TT, TN-C, TN-S, TN-C-S and other power supply system. • The shell design is installed on the 35mm electronic rail. • It protect to indirect and direct lightning effect or other transient overvoltage. • Built-in over-current overheating, temperature-controlled circuit breaker technology • SPD design according with GB18802.1/IEC61643-1 standard.

40ka 2P Surge Protector Type 2 Lightning Protection Device Product Description: • BR-40 2P Din Rail 40kA Power Surge Protector for AC Power is designed according to IEC61643 standard. • Protector applies to power utilization for household and the similar places, facilities for inputting circuit in the thunder direct stroke, or protecting from the damage of the surging current caused by outdoor arrester. • It is accordance with the criterion of low-voltage Surge Protective

40ka Surge Protective Device 8/20μs SPD Lightning Arrester Description: - Surge protective devices consisting of a base part and MOV plug-in protection modules. - It protects the indirect lightning and direct lightning impact or other transient overvoltage surge, which is mainly applicable to the residence, the third industry and the industrial and mining enterprises. - High energy MOV inside. - Safety insulation of fire retardant high flame retardant material - Low residual

Three Phase Lightning Protector 60ka Surge Arrester Product description: • BR-60 4P surge protective device (hereinafter referred to as SPD) are suitable for AC 50/60Hz, TN-S power supply system. • Indicating window: Green: normal function; Red: functionless, immediate replacement required. • It protect to indirect and direct lightning effect or other transient over voltage. • This Class C surge protective device consisting of a base part and MOV plug-in protection modules. •

AC SPDs 2 Pole MOV 60ka Lightning Protection Feature: • High Surge Energy capacity protects downstream loads from voltage spikes and line transients. • Our BR-60 DIN Rail AC Surge Protective Devices are connected in parallel and use an MOV to clamp high-voltage surges. • Thermal protection circuit disconnects load under high energy absorption events. • This device is primarily used in the main electrical panel for the protection of 1-phase systems. • Fail safe/self-protection

15kA Secondary Power Surge Protector Feature: • Devices have indicators to advise end of life of the device • BR-15DP 2P is the Type 2/Class II devices protecting against induced voltage surges (8/20 μs). • The device meets the requirements of the IEC 61634-1 and EN 61643-11 standards • Dispositivo spd 15 ka surge protective device. 15kA Secondary Power Surge Protector Technology characteristic: Specification BR-15DP 275 2P Item name Surge Arrester SPD dassification according