Power Surge Protection Device

Type 3 Series Power Class III Surge Protector 10KA Arrester 275V Type 3 Series Power Class III Current Surge Protector Features: • Module design, convenient installation.• Remote alarm interface: optional.• Smallness leak current, response quickly, less residual voltage.• The maximum discharge current is 10kA (8/20us).• Signal indication device, green (normal), red (abnormal).• New technology, highly energy. Type 3 Series Power Class III Current Surge Protector Characteristic

High Quality Low Voltage AC 385 SPD Single Phase Lightning Surge Arrester Low Voltage AC 385 SPD Single Phase Lightning Surge Arrester Feature: • Protection class: Type 1,Class I. • Pole number: 2P. • High security performance. • Easy maintenance. • Red indicates broken, replacement notice, which is clear and easy distinguished. • Optional remote signaling, realizable remote monitoring. • Assembled 1P, 2P, 3P, 4P etc. modes, applied to various electric network systems. Low

AC Lightning 25KA 1.5KV 1P+NPE B+C Series Power SPD Surge Suppressor AC Lightning Power SPD Surge Suppressor Feature: • High energy surge protection.• Designed according to IEC and GB standards.• The products with a strong surge discharge capacity, discharge current of each 25~100kA (8/20μs), 25kA (10/350μs).• Failure detection indicator.• Remote alarm interface: optional.• Standard modular installation. AC Lightning Power SPD Surge Suppressor Products detail: BR-25M 1+1SPD

Power 10/20kA Class C Single Phase 2P AC Surge Protector Device 275V SPD 10/20kA Class C Single Phase Power Surge Protection Device Feature: • Designed according to IEC 61643-1. • Single-phase protection for TN-S system. • Pluggable module, easy for installation and maintenance. • High discharge capacity, quick response. • Green window will change when fault. • Remote alarm control: Optional. 10/20kA Class C Single Phase Power Surge Protection Device Technology characteristic

320V White Surge Protector Device One Pole Type 1+2 AC Power Class 1+2 SPD 320V White Power Surge Protection Device Features: • Indoor fixed installation, voltage limited type. • Module design. • Large lightning current discharge capacity. • Installed in 35mm DIN rail, easy to wire. • Easy to maintain. • When the SPD works normally, the visible window displays green, and when it fails, it displays red. • Time of response

AC 275v Type 3pole+NPE Power Lightning Protection Class 1+2 Surge Arrestors AC 275v Type 1+2 3 Pole + NPE Power Lightning Protection Feature: • Class I+II, Class B+C 12.5kA high discharge capacity TT and TN-S system lightning protector. • Designed according to IEC 61643-1. • Pluggable module, high discharge capacity, quick response. AC 275v Type 1+2 3 Pole + NPE Power Lightning Protection Technology characteristic: BR-12.5M 275 3+1 Max. continuous operating a.c. voltage Uc

AC Power Surge Protection 220v SPD Type 1+2 Lightning Arrester 12.5kA Indoor AC Power Surge Protection Device 220v SPD Feature: • Surge arrestor. • Meet the type 1+2 requirement class according to IEC 61643-11. • High arresting capacity up to 12.5 kA (10/350μs). • Visual status display. • The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. • Available with optional remote signaling. • Simple standard

AC 385V Power Surge Protection 60KA SPD Device Lightning Protection of Class II AC 385V 60KA SPD Power Surge Protection Device Feature: • 385V surge protective device. • Stable performance. • Extremely quick respond, large intake capacity. • No leakage current, long work life, simple maintenance. • 35mm guide rail installation, standardized module design. • The product is a surge protector for the low-voltage power distribution system, and the voltage limiting function

10kA Lightning Protection SPD 75V 2P Power Surge Protector Device 10kA Power Lightning Surge Protection Devices SPD Feature: • Product Type: Single phase 10kA 2P Power Surge Protector. • Module design, convenient installation. • Rated Voltage: 60V AC (Can be customized according to client's request). • Smallness leak current, response quickly, less residual voltage. • Nominal Discharge Current (8/20us): 5kA. • Maximum Discharge Current (8/20us): 10kA. • Signal indication

Power Voltage AC 3 Phase SPD 40kA Surge Protective Device Electrical Equipment Power Voltage AC 3 Phase SPD 40kA Lightning Protectors Feature: • Plug and play design, live-wire replacement, easy maintenance. • Designed according to IEC 61643-1. • Green light in notice window indicates normal; red indicates broken, replacement notice, which is clear and easy distinguished. • Three-phase protection for TN-S system. • Optional remote signaling monitoring interface, realizable

Electrical Surge Suppressor Power Surge Protector 385v SPD 25KA IEC - 61643 Electrical Surge Suppressor Power Surge Protection Device Features: • Surge arrestors. • Quick response. • High arresting capacity up to 25 kA (10/350μs). • Low residual pressure. • Simple standard hat rail mounting. • Automatic trip during deterioration and the visual warning indicator window turns red (failure). • Labeled connections. • Flame retardant plastic are adopted. Electrical Surge

3 Pole SPD 275V Power Surge Protector 60kA T2 MOV Surge Protective Device 3 Pole SPD 275V Power Surge Protector Features: • Protection class: Type 2, Class II. • Pole number: 3P. • Comply with IEC standards. • Green window will change when fault. • High performance varistor with thermal disconnection tripping device. • Plug-in module/base designs facilitate replacement of a failed module without the need to remove system wiring etc. • Designed to protect 3 phase TN-C systems.

Factory Supply 275V Surge Protector 20kA Electrical Lightning Protective Device 275V AC Surge Protector Features: • Designed according to IEC 61643-1. • Three-phase protection for TT and TN-S system. • Pluggable module, easy for installation and maintenance. • Quick response. • Green window will change when fault. • Remote alarm control: optional. 275V AC Surge Protector Technology characteristic: BR-20 275 3+1 SPD classification according to EN61643-11 Type 2 SPD classificat

Best Price Type 1+2 Lightning Protector AC Power 4 Pole Surge Suppressor Type 1+2 Surge Protector Features: • Uc 320V can be achieved. • Pole number: 4P. • Time of response

Class II Home AC 1p Lightning Protection Imax 60kA Power Surge Protector 275v Class II Home AC 1p Lightning Protection Feature: • Indoor fixed installation, voltage limited type. • It adopts 35mm standard rail. • The response time in the 25 nanosecond. • When the SPD works normally, the visible window displays green, and when it fails, it displays red. Class II Home AC 1p Lightning Protection Technology characteristic: BR-60 275 1P SPD classification according to EN61643-11

High Current Lightning Protector 25kA SPD AC 275V Single Phase Power Supply High Current Lightning Protector 25kA SPD Features: • Indoor fixed installation, voltage limited type. • Designed according to IEC 61643-1. • Single-phase protection for TN system. • Easy for installation and maintenance. • High discharge capacity, quick response. • Green window will change when fault. • Remote alarm control for optional. High Current Lightning Protector 25kA SPD Technology Characteri

Class C Surge Protection Unit AC 275V 20kA Lightning Surge Arrester Class C Power Surge Protection Device Features: • Pole No.: 1P+NPE. • Frequency: 50/60Hz. • Standards: IEC61643-1. • In case of surge current or voltage caused by lightning strike or similar, SPD functions quickly conduct the surge voltage/current to earth and thus effectively prevent the downstream equipment of its protected line from destruction. • Green: normal function; Red: functionless, immediate

4 Poles AC Surge Protector 385V Thermal Plastic Material Surge Protector 4 Poles Power Surge Protection Device Features: • High energy surge protection. • Pluggable replacement module. • Standard modular installation. • Reaction rate: ≤25ns. • Remote alarm interface. • The maximum discharge current of single module is 40kA (8/20us). • Failure detection indicator. • Anti-shock, flame retardant plastic are adopted. 4 Poles Power Surge Protection Device Technology characteristic

Single Phase Power Supply 2P 10KA Surge Protector Din Rail Power Surge Arrester Single Phase Power Supply Power Surge Protection Device Features: • 150V surge protector. • High quality pressure sensitive resistance, stable performance. • Protection of heavy-loaded electrical circuits from overload. • Indicate deterioration module: green (normal), red (failure). • Connection capacity: rigid conductor 16mm². • Extremely quick respond, large intake capacity. • Small leakage

Wholesale Manufacturer AC 275V 12.5KA 4P Three Phase Power Supply Lightning SPD AC 275V 12.5KA Power Surge Protection Device Features: • Designed according to IEC and GB standards. • The products with a strong surge discharge capacity, discharge current of each 50kA (8/20μs), 12.5kA (10/350μs) levels of protection for low voltage distribution system. • It is designed as module and 35mm DIN-Rail Mounting. • It is accordance with the criterion of Low-voltage Surge Protective