Machine Tools Accessories

Features: .Gauge blocks (also known as gage blocks, Johansson gauges, slip gauges, or Jo blocks) are a system for producing precision lengths. It is fundamental standards for linear measurement.For adjusting,checking ,or inspecting measuring instruments and tools ,and precision workpiecesThe individual gauge block is a metal or ceramic block that has been precision ground and lapped to a specific thickness. Gauge blocks come in sets of blocks with a range of standard lengths.

The quick-changing tool post is a major spare part of the ordinary lathes. It is composed of the cutter-cartridge body and the tool-holder for various cutting tools which can replace the square tools table for processing works like cylindrical facing, end facing, cutting, knurling, drilling, enlarge, boring and reaming etc. The height of tools can be regulated and positioned relative to the

DescriptionMade from carburized alloy steel, work surface hardness to HRC 58-62Taper accuracy

Competitive Price Micro Boring Bar Feature: 1. BT NO taper shank is in conformity with AT3 standard 2. Inner bore D is in conformity with tolerance H5 3. Entire center cooling is good for through coolant and antivibration Technical Parameters: Model No. Type D d L L1 L2 L3 M Degree BT30 -MGK1-55 Fig.1 11 19 103.4 55 5.05 - M5*0.5 - -MGK1-70 118.4 70 -MGK2-80 14 24 128.4 80 6.62 -MGK3-80 18 31 128.4 80 8 M6*0.75 -MGK4-70 22 39 118.4 70 10 M8*0.75 -MGK5-70 28 50 118.4 70 13 M10

Product DescriptionRotary table for indexing & division of workpieces on milling and drilling machines so that various milling, drilling, boring on circular surfaces can be done. With a tailstock, complex machinings on contour surfaces can be carried out. Optional dividing plates:Graduated 360.degreeLow prodfile10 second vernier reading Optional Tailstock:Gear drive immersed in oilOptional dividing plates and

Magnetic Chuck V-Blocks -- Pair V-Blocks 1-7/8 H x 2-3/8 W x 2" L Magnetic induction block used to extends magnetic force to hold bar, round, or irregular shaped workpieces. Works with surface-grinding applications and other magnetic workholding chucks. 1.Not magnetized 2.Choose from a wide selection of models 3.Used as an auxiliary tool to hold workpieces

Short Taper drill Chuck Holder Feature: 1. BT NO Taper shank is in confrmity AT3 Standard 2. Special for boring blind hole 3. Suitable for uneven aperture and rough maching casting Technical Parameters: Model No. L L1 L2 d BT30 -G16-45 117.4 45 24 15.733 -G18-45 125.4 32 17.78 -J6-45 118.8 25.4 17.17 BT40 -G16-32 121.4 32 24 15.733 -G16-45 134.4 45 -G16-75 164.4 75 -G16-90 179.4 90 -G18-45 142.4 45 32 17.78 -G18-75 172.4 75 -J6-45 135.4 45 25.4 17.17 BT40 -G16-45 170.8 45 15

HSK Shank ER Collet Chuck Features of our HSK Spindle Tooling : a. Price: the most competitive price in all over the world; b. Precision: high accuracy can reach 0.003mm; c. Stability: through cryogenic treatment at subzero 196 centigrade, high precision still maintains in the long whole using life. d. Dynamic Balance: G6.3/12000rpm or depends on clients’requests Technical Parameters: Model No. Capacity L L1 D HSK63A -ER16-100 1-10 132 100 28 -ER20-100 2-13 34 -ER25-100 2-16

Flash change tension and compression taper holder Feature: 1. BT NO taper shank is in conformity with AT3 standard Technical Parameters: Model No. D d L1 Range Expension Capacity BT30-MGT316 19 36 57 M3-M16 6 12 BT40-MGT316 19 36 62 M3-M16 6 12 BT40-MGT822 31 53 94 M8-M22 12.5 12.5 BT50-MGT316 19 36 71 M3-M16 6 12 BT50-MGT822 31 53 102 M8-M22 12.5 12.5 Delivery and payment: 1.Samples or small order will be delivered by courler,DHL,FEDEX,TNT,ETC 2.Normal order will be

The Features: 1.Two piece construction results in utmost clamping flexibility, on work pieces ranging from short to extra long. 2.Body made of meehanite casting. Jaws are hardened and precision ground. Small movement of detachable handle grips work firmly for even the heaviest cuts. Each half supplied with key slots and wedges for exact locating on machine table. 3.When clamping large workpieces, the size of the opening and the number of vices can be adjusted freely according

The Features: Size: 8" x 6" Effetively removes residual magnetism from dies, cutters, punches, etc. 110V, single phase power

SK Shank Face Tool Holder Mill Holder Feature: 1. SK NO taper shank is in conformity with AT3 standard 2. Fitting tolerance h6 straight sets Technical Parameters: Model No. d1 d2 D L L1 L2 K1 K2 T SK30 -MGB22-45 22 26 45 109.3 45 16.5 4.8 10 M10*30 -MGB22-60 124.3 60 -MGB27-45 27 33 54 111.3 45 18.5 5.8 12 M12*30 -MGB27-60 126.3 60 -MGB32-60 32 41 58 130.3 60 22 6.8 14 M16*35 SK40 -MGB22-45 22 26 48 129.9 45 16.5 4.8 10 M10*30 -MGB22-60 144.9 60 -MGB22-100 184.9 100 -MGB22

Lug type NC Morse Taper Holder Features: 1. Strong and sturdy. Stable performance. 2. The surface processing by special workmanship, luster and bright. 3.Performance stability, high accuracy,very durable. 4. Ease of operation and high quality work results. 5. Make you better, more efficient, more durable processing products. Technical Parameters: Model No. L L1 D1 D BT30 -MGA1-45 93.4 45 12.065 25 -MGA2-60 108.4 60 17.78 32 -MGA3-80 128.4 80 23.825 40 BT40 -MGA1-45 110.4 45

Model A B C D E F G H J X-Travel Y-Travel Packing Size N.W/G.W MG16 400 120 10 145 282 222 200 160 110 220 160 49x38x20 23.5/27 MG20 500 180 12 151 355 260 235 200 116 280 175 64x42.5x15.5 35/40

FEATURES: UTILIZES 5C COLLETS PATENTED SINGLE LEVER ACTION ACTIVATES THE INDEXING MECHANISM PRECISION GROUND INDEX PLATE HAS 24 INDEXING POSITIONS IN 15 DEGREE INCREMENTS, ANY OF WHICH CAN BE MASKED FOR GREATER VERSATILITY HARDENED AND GROUND THREADED SPINDLE  2 1/4"-8 TPI OPTIONAL TAILSTOCK AVAILABLE SPECIFICATIONS MAXIMUM VARIATION DIVIDING SPINDLE CONCENTRICITY 0.0004" CYLINDER CENTER BORE CONCENTRICITY 0.0008" LATERAL OFFSET OF CENTER SLOT OF SPINDLE 0.0008" CENTER SLOT

Including MT shank,NT shank,R8 Shank and CAT Shank. No. Shank L(mm) M No. Shank L(mm) M F1-MS2W MS2 93 7/8"-20 1-1/2"-18 F1-ISO40 ISO40 135 7/8"-20 1-1/2"-18 F1-MS2 108 F1-ISO50 ISO50 168 F1-MS3W MS3 110 F1-5/8 5/8" 97 F1-MS3 128 F1-3/4 3/4" 112 F1-MS4W MS4 133 F1-7/8 7/8" 127 F1-MS4 154 F1-1 1" 137 F1-MS5W MS5 160 F1-1-1/4 1-1/4" 167 F1-MS5 186 F1-1-1/2 1-1/2" 197 F1-MS6W MS6 214 F1-1-3/4 1-3/4" 227 F1-MS6 248 BT40X7/8"-20-45 BT40 122.

BT shank Face Mill Holder Feature: 1. BT NO taper shank is in conformity AT3 standard 2. Excircle d1 is in conformity with tolerance h5 Model No. Type d1 d2 D L L1 L2 K1 K2 T BT30 -MGB22-45 Fig.1 22 26 45 109.9 45 16.5 4.8 10 M10*30 -MGB22-60 124.9 60 -MGB27-45 Fig.1 27 33 54 111.9 45 18.5 5.8 12 M12*30 -MGB27-60 126.9 60 -MGB32-60 Fig.1 32 41 58 130.4 60 22 6.8 14 M16*35 BT40 -MGB22-45 Fig.1 22 26 48 126.9 45 16.5 4.8 10 M10*30 -MGB22-60 141.9 60 -MGB22-100 181.9 100 -MGB22

BT Shank Twin-Bore Cutter Tool Holder Feature: 1. BT NO taper shank executive AT3 standard 2. Tolerance H5 for D inner bore 3. Entire center cooling is good for through coolant and antivibration Technical Parameters: Model No. Type D d L L1 L2 L3 M BT30 -MGK1-70 Fig.1 11 19 118.4 70 5.05 - M4*0.5 -MGK2-80 14 24 128.4 80 6.55 M5*0.5 -MGK3-80 18 31 128.4 80 8.05 M6*0.75 -MGK4-70 22 39 118.4 70 10.05 M8*0.75 -MGK5-60 28 50 108.4 60 13.05 M10*1 -MGK6-60 36 64 108.4 60 16.05 M12*1

Features: . Can hold 11PC R8 Collets . Can be mounted anywhere for quic accessibility

NT Shank Face Mill Holder Feature: 1. NT NO taper shank is in conformity with AT3 standard 2. Excircle d1 is in conformity with tolerance h5. Technical Parameters: Model No. Type d1 d2 D L L1 L2 K1 K2 NT30 -MGB22-20 Fig1 22 26 45 104.9 20 16.5 4.8 10 -MGB27-20 27 33 54 106.9 18.5 5.8 12 -MGB32-20 32 41 58 110.4 22 6.8 14 NT40 -MGB22-20 22 26 48 129.9 16.5 4.8 10 -MGB27-20 27 33 60 131.9 18.5 5.8 12 -MGB32-20 32 41 62 135.4 22 6.8 14 -MGB40-20 40 48 80 138.4 25 8 16 -MGB60-24