Fluid Level Meter

KLD803 4-20mA radar level transmitter 80G adjustable frequency radar level meter KLD803 80G radar level gauge adopts frequency modulated continuous wave (FMCW) technology. The antenna emits a high-frequency FM radar signal, and the frequency of the radar signal increases linearly. The transmitted radar signal is received by the same antenna after being reflected by the measured medium. At the same time, the frequency difference between the transmitted signal frequency and the

GXUS series analogue output ultrasonic level sensor Features of water level sensor Cost effective. Non-Contact measurement. Accuracy can be 0.3% and against all kinds of interference waves. Easy to use spport Modbus protocol (both RTU and ASCII). Eight types algorithm can be choose to adapt to a variety application field. Easy to installation and set,you can calibrate the instrument completely according to our manual. This instrument is a non-contact instrument, so it has low

2024 new designed ultrasonic sensor measurement Brief Introduction KUM ultrasonic level (material place, liquid level) meter, is a non-contact, high reliability, cost-effective, easy to install and maintain level measurement instruments. It does not have to contact medium and it can meet most of the requirement of level measurement. Due to the different installation environment of instrument, so before ultrasonic level meter works we must know the basic situation of the

KLD806 80G FM Radar Level Sensor Introduction Silo radar level measurement uses a pulse generator and a grain bin fill sensor to determine the level of solids present in the silo. The pulse is transmitted down a contact cable or rod, then returns when it encounters the change in dielectric marked by the shift from air to the grain. Feature Measure the level of solid particles, chemical liquid tank, oil tank and process containers. Radar level meter is working based on

KLD804 radar level meter water tank 4-20mA 100m FMCW radar level transmitterKLD804 80G radar level gauge adopts frequency modulated continuous wave (FMCW) technology. The antenna emits a high-frequency FM radar signal, and the frequency of the radar signal increases linearly. The transmitted radar signal is received by the same antenna after being reflected by the measured medium. At the same time, the frequency difference between the transmitted signal frequency and the

Kacise RS485 Radar Level Transmitter 80G Adjustable Frequency Radar Level Sensor 100m OEM The Kacise RS485 radar level transmitter is an outstanding and highly advanced device designed for precise level measurement. With its 80G adjustable frequency radar level sensor, it offers remarkable flexibility and accuracy. This sensor can be fine - tuned to adapt to different application scenarios, ensuring optimal performance in various environments. The transmitter is equipped with

KLD803 80G FM Radar Level Sensor Introduction The hardware system uses advanced microprocessors and embedded system processing software. The signal algorithm processing integrates advanced Echo-capture signal processing technology. This makes the product applicable to various complex industrial plant conditions. The “empty tank pretreatment” technology enables the instrument to correctly identify effective echoes and obtain correct measurement results even in the presence of

GXCZ 2014 high performance magnetic level transmitter 1. Specification: GXCZ Series Analog Output GXCZ Series Digital Output Power supply 24V DC Measuring object Liquid level or Interface Liquid level or Interface Measure range 80~5000mm (Null point can re-mark by USB encoder) Output Voltage: 0~5V or 0~10V Modbus Current: 0~20mA or 4~20mA Load capacity Voltage output(min) ≥5K&; Can read 32 sensors at same time Current output(max) 600&; Linearity error ≤±0.05%F.S(min±50μm)

Economical Digital ZIGBEE Fuel level Sensor for Bus System Summarize 1. System Summarize of Economical Digital ZIGBEE Fuel level Sensor for Bus The “Liquid height measuring system in GPRS communicate mode” include “Liquid height measuring terminal equipment in GPRS communicate mode”, “Server Management Software” and “Configuration Line”. It is used for timing measure liquid height value, temperature value, longitude and latitude data, date and time information and show these

30m high pressure 80G 1mm accuracy 30m water tank radar level transmitter for slightly corrosive liquid KLD802 80G radar level gauge adopts frequency modulated continuous wave (FMCW) technology. The antenna emits a high-frequency FM radar signal, and the frequency of the radar signal increases linearly. The transmitted radar signal is received by the same antenna after being reflected by the measured medium. At the same time, the frequency difference between the transmitted

100m High Frequency 80G Radar Level Meter RS485 Non Corrosive Liquid Level TransmitterThe 100m High Frequency 80G Radar Level Meter is an outstanding product. It features RS485 interface and is designed for non-corrosive liquid level measurement. With its high frequency and advanced technology, it can accurately detect the liquid level up to 100 meters, providing reliable and precise data transmission.1. Product Dimension2. Working PrincipleThe radar antenna transmites narrow

cheap wireless clamp on type portable ultrasonic fire pump Flow Meter GXUFM-2000 Series High Quality and Reliability Open Channel Flow Meter Brief Introduction Smart ultrasonic flow meter can be used to measure various kind of fluid in the application field of tap water, heating, water conservancy, metallurgy, chemical industry, machinery, energy indurstry. Both sensors and the host can be installed at the pipe. also can be used as calorimeter Product Introduction of cheap

KLD802 80G FM Radar Level Sensor Introduction Level in the focus KLD802 operates with a transmission frequency of 80 GHz. With an 80-mm antenna, this results in a beam angle of only 3°. The radar sensor receives only distinct, definitive reflections from the product surface. This makes the measurement more accurate and reliable. Previous radar sensors required process fittings with a minimum size of 1½" to achieve adequate signal focusing. For that reason it was virtually

1mm accuracy OEM RS485 Radar Level Gauge for Slurry Storage Tank KLD802 80G radar level gauge adopts frequency modulated continuous wave (FMCW) technology. The antenna emits a high-frequency FM radar signal, and the frequency of the radar signal increases linearly. The transmitted radar signal is received by the same antenna after being reflected by the measured medium. At the same time, the frequency difference between the transmitted signal frequency and the received signal

Online oil metal check wear debris sensor analysis monitoring instruments Description Description of GX DC Series wear debris sensor Mechanical equipment fault occurs are mostly caused due to mechanical wear, wear particles exist in a large amount of information about wear condition, the monitoring can be used to judge the wear state or judgment occurred in the form of wear and tear. When the damage is going to happen, the number of metal particles in the lubricating oil will

KLD804 80G FM Radar Level SensorIntroductionIn the process of industrial automation control, material level is an important parameter. There are many methods of material level measurement. For different working conditions and media, material level gauges with different measurement principles can be used for measurement, such as static pressure type, float type, heavy hammer type, ultrasonic and other common material level measurement methods. Instruments have their own

OEM 80G Radar Level Gauge Sensor RS485 Water Tank Level Measurement GaugeThe OEM 80G Radar Level Gauge Sensor with RS485 interface is a highly efficient and accurate device for water tank level measurement. This transmitter sensor is engineered to precisely detect the level of liquid in water tanks. The 80G radar technology offers enhanced sensing capabilities, allowing it to provide reliable readings even in complex and fluctuating conditions. With the RS485 communication

1mm Accuracy Non Contact Radar Level Gauge OEM 100m Water Tank Level Measurement The 1mm Accuracy Non-Contact Radar Level Gauge is an outstanding product. It offers extremely precise measurement with an accuracy of 1mm. As an OEM device, it is suitable for water tank level measurement up to 100m. Its non-contact design reduces wear and tear, providing reliable and long-term performance for various industrial applications. 1. Product Dimension 2. Working Principle The radar

Water Submersible Pressure Level Sensor Introduction GXPS series liquid submersible pressure level transmitter normal level transmitter is a special structure and use of products, high precision, small size, good stability, which with abrasion, oil, acid and alkali resistant, high-intensity air conductivity cable to meet a variety of special-purpose level measurement site.Widely use sewage river water processing, ditch large rivers reservoir lakes coast geology hydrological

GPS tracking solution capacitance fuel level sensorDescription of GPS tracking solution capacitance fuel level sensorKCF capacitance level sensor is used to continuously detect fuel level by measuring the capacitance variations as the level changes.Feature of GPS tracking solution capacitance fuel level sensorSuitable for vehicle, truck, coach, agrimotor, GPS fleet management, GPS tracking system, generator set, construction machinery and more.KCF can be easily shortened to