Prepainted Aluminium Coil

Introduction The 1.5–4.0 mm 5052 aluminum sheet with salt spray resistant chromate-free passivation is the preferred marine-grade alloy worldwide for boat decks, gunwales, bulwarks, transoms, cockpit soles, console structures, hatch covers, ladder treads and non-structural marine accessories. With Mg content 2.2–2.8%, 5052 (H116/H321 temper) is classified as a high-strength non-heat-treatable marine alloy and offers: Outstanding resistance to seawater, salt spray & marine

AA3003 H24 2.0MM Prepainted Aluminum Coil for Curtain Wall Decoration This AA3003 H24 2.0mm pre-painted aluminum coil is a high-performance rolled material specifically designed for curtain wall decoration. It features a durable pre-painted surface coating and a base material of AA3003 aluminum alloy in the H24 semi-hard state, delivering excellent formability, corrosion resistance, and aesthetic consistency for architectural applications. Product Parameters Product Color

Introduction The 1.0–3.0 mm 5083 aluminum plate (mill finish or anti-corrosion primed) is the global marine industry benchmark for hull plating, superstructure, decking, bulkheads, superstructures, deck houses and other above-waterline structural components in high-performance vessels. With Mg content 4.0–4.9%, 5083 is classified as the highest-strength non-heat-treatable marine alloy (H116/H321 temper) and offers: Outstanding resistance to seawater & marine atmosphere

AA3003 H24 2.0MM Prepainted Aluminum Coil for Door and Window Decorative Panels This AA3003 H24 2.0mm pre-painted aluminum coil is a high-quality rolled metal material specially designed for door and window decorative panels. It is made of AA3003 aluminum alloy as the base material, which undergoes strict pre-painting treatment (including coating and baking processes) to form a protective and decorative surface layer, featuring excellent processability, durability and

Introduction The 0.25–0.30 mm 3104 aluminum can body stock (washed & lubricated) is currently the dominant alloy globally for two-piece drawn & ironed (D&I) beverage can bodies — especially for carbonated soft drinks, beer, energy drinks and non-carbonated beverages. Compared to 3004 (older standard) or 5182 (can end stock), 3104 is the modern evolution that offers: Optimized Mn + Mg chemistry → higher strength with controlled earing (≤2–3%) Superior deep-draw & ironing

Introduction The 0.6–1.2 mm 3003 aluminum sheet (clean surface, no oil, impact extrusion grade) is currently the most widely adopted alloy worldwide for square (prismatic) battery shells, EV battery enclosures, energy storage system (ESS) modules and structural battery trays. Compared to 1050/1060 (softer) or 5052/5083 (stronger but more expensive), 3003 delivers the optimal balance for modern battery shell manufacturing: Mn alloying (1.0–1.5%) → 20–30% higher strength &

AA6061 H24 0.8MM Prepainted Aluminum Coil for Door and Window Decorative Panels AA6061 H24 0.8mm prepainted aluminum coil is a high-performance, lightweight decorative material specifically developed for door and window decorative panels. Made of high-quality AA6061 aluminum alloy, processed with H24 temper and a standard thickness of 0.8mm, it integrates excellent mechanical strength, good processability and elegant surface finish. As a cost-effective and versatile

AA5052 H24 1.5MM Prepainted Aluminum Coil for Door and Window Decorative Panels AA5052 H24 1.5mm prepainted aluminum coil is a high-performance decorative material specially designed for door and window decorative panels, combining excellent mechanical properties, superior corrosion resistance and elegant appearance. Made of high-quality AA5052 aluminum alloy, processed with H24 temper and a standard thickness of 1.5mm, it is more rigid and durable than thinner aluminum coils

AA5005 H24 1.2MM Prepainted Aluminum Coil for Door and Window Decorative Panels AA5005 H24 1.2mm prepainted aluminum coil is a professional decorative material tailored for door and window decorative panels, integrating aesthetics, durability and practicality. Made of high-purity AA5005 aluminum alloy, processed with H24 temper and a standard thickness of 1.2mm, it features excellent corrosion resistance, moderate strength and superior surface performance, which can perfectly

AA5005 H24 1.0MM Prepainted Aluminum Coil for Indoor Ceiling AA5005 H24 1.0mm prepainted aluminum coil is a high-performance decorative and functional material specifically designed for indoor ceiling applications. Made from high-quality 5005 aluminum alloy with H24 temper and a standard thickness of 1.0mm, it integrates excellent mechanical properties, superior surface finish, and strong adaptability, making it a preferred choice for modern indoor architectural decoration.

Introduction The 0.4–0.8 mm 3105 PVDF coated aluminum coil is currently the premium upgrade choice worldwide for refrigerator back panels (also called rear covers, condenser guards, structural back sheets or rear liners) — especially in high-end, coastal-market and fingerprint-conscious models. Compared to 1060/1100 (softer & lower strength) or 5052 (stronger but 20–40% more expensive), 3105 delivers the optimal balance for modern refrigerator manufacturing: Mn alloying (1.0

AA5052 H26 1.0MM Prepainted Aluminum Coil for Indoor Ceiling This is a premium prepainted aluminum coil made from AA5052 alloy , tempered H26 , with a standard thickness of 1.0mm , specially engineered for indoor ceiling systems. It combines excellent formability, stable strength, uniform paint finish, and long‑term durability for interior architectural applications. Product Parameters Product Color Coated Aluminum Sheet/Prepainted Aluminium Coil Thickness 0.1-4.0mm Width 30

Introduction The 1.0–4.0 mm 3003 aluminum circles (deep drawing quality, ceramic or PTFE coated) are currently the most widely adopted alloy worldwide for the base disc of non-stick fry pans, saucepans, woks, grill pans, induction cookware and multi-layer clad bottoms. Compared to 1050/1060 (softer & lower strength) or 3004/5182 (stronger but higher cost), 3003 provides the optimal balance for modern non-stick cookware manufacturing: Mn alloying (1.0–1.5%) → 20–30% higher

Introduction The 0.6–1.0 mm 3105 pre-painted aluminum coil with double-side lacquer and anti-scratch surface is currently the preferred mid-to-premium alloy worldwide for seamless rain gutters, K-style / box gutters, half-round gutters, downspouts, gutter guards, elbows and accessories — especially in regions with moderate-to-high rainfall, UV exposure or occasional salt air. Compared to 3003 (softer) or 5052 (stronger but 20–40% more expensive), 3105 offers the best balance

Introduction The 0.7–1.5 mm 3003 PE coated aluminum sheet is currently the most widely chosen cost-effective yet reliable alloy worldwide for industrial & commercial roofing, long-span cladding panels, exposed-fastener roofing, wall sheeting and agricultural building envelopes. Compared to 1060/1100 (softer & lower strength) or 5052/5005 (stronger but significantly more expensive), 3003 delivers the optimal balance for the vast majority of industrial roofing projects: Mn

Introduction The 0.5–1.2 mm 3003 PVDF coated aluminum coil is currently the most widely accepted mid-to-premium grade worldwide for lightweight, long-life metal roofing & exterior siding — especially standing seam, snap-lock, corrugated, exposed-fastener and architectural wall panels. Compared to 1060/1100 (softer & lower strength) or 5052/5005 (stronger but 20–40% more expensive), 3003 offers the optimal cost-strength balance for the majority of roofing & siding applications

AA3003 H26 0.8MM Prepainted Aluminum Coil for Indoor Ceiling AA3003 H26 0.8mm prepainted aluminum coil is a high-performance decorative aluminum material designed for interior ceiling and wall cladding systems. With better rigidity and flatness, it is widely used in high-quality interior decoration projects. Product Parameters Product Color Coated Aluminum Sheet/Prepainted Aluminium Coil Thickness 0.1-4.0mm Width 30-1600mm Material 1050, 1060, 1100, 3003, 3004, 3105, 5052,

AA3003 H24 0.6MM Prepainted Aluminum Coil for Indoor Ceiling AA3003 H24 0.6mm prepainted aluminum coil is a high-quality decorative aluminum material specially developed for indoor ceiling systems. It combines excellent formability, stable mechanical properties and uniform coating performance, making it an ideal choice for modern interior decoration. Product Parameters Product Color Coated Aluminum Sheet/Prepainted Aluminium Coil Thickness 0.1-4.0mm Width 30-1600mm Material

Introduction The 0.15–0.25 mm 1100 aluminum closure sheet (color lacquered & lubricated) is the most widely used economical pure-aluminum grade worldwide for twist-off caps (ROPP / roll-on pilfer-proof), crown caps, beverage bottle lids, jar caps and easy-open closures in the beverage, beer, soft drink, energy drink, spirits and food jar markets. With aluminum purity ≥99.00%, 1100 provides: Outstanding deep-draw & stamping performance in thin gauges Excellent lacquer adhesion

AA5052 H26 0.6MM Prepainted Aluminum Coil for Exterior Wall Panels AA5052 H26 0.6mm prepainted aluminum coil is a high-performance decorative and protective material tailored for exterior wall panel applications. As a 5000-series aluminum-magnesium alloy product, it integrates excellent corrosion resistance, mechanical strength and aesthetic performance, with H26 temper and 0.6mm thickness perfectly matching the functional and decorative requirements of building exterior