Nickel Alloy Flanges

UNS N08810 Incoloy 800H Alloy 800H Socket Weld Flange Nickel Alloy Flanges 1. Socket weld flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47. Socket weld flanges are available only up to 3″ NPS Size. During dimensional inspection of flange, you should check for Outer & Inner Diameter of body Bolt Circle & Bolt Hole Diameter Depth of the socket Length of

ASTM B564 Alloy 800 UNS N08800 Anchor Flange Nickel Alloy Flange 1.WHAT IS AN ANCHOR FLANGE? An anchor flange is a device installed on a pipeline to combat axial movement. Resembling a collar, once it is attached to a pipe, the anchor flange is commonly anchored into a concrete foundation. Typically placed onto a section of pipeline as it makes a turn or is at a bridge crossing, the anchor flange is used to prevent the pipeline from moving. Sizes for Anchor Flanges All Anchor

ASME B16.48 Hastelloy B3 Forged Spectacle Blind Spacer Ring Paddle Blind 1.Alloy B2 & B3 Machining Data Suggested starting rates: Facing, Turning & Boring Speed 80-150 SFM Depth-of-cut 0.25” Feed for Roughing 0.006” - 0.008” Feed for Finishing 0.010” - 0.012” Drilling Speed 8-14 SFM per drill diameter 1/16” Dia. of hole 490-800 RPM 1/8” Dia. of hole 240-420 RPM 3/16” Dia. of hole 160-285 RPM 1/4” Dia. of hole 120-213 RPM 7/16” Dia. of hole 69-120 RPM 1/2” Dia. of hole 61-106

Socket Weld Nickel Alloy Flanges Alloy 31 ASTM B564 UNS N08031 1/2 Inch - 24 Inch 1. ALLOY 1.4562 / UNS N08031 / ALLOY 31 Corresponding Standards: EN 1.4562, UNS N08031 MATERIAL DESCRIPTION • Alloy 31 is a nickel, chromium and molybdenum stainless steel with nitrogen and copper additions. It combines moderate tensile strength and high ductility with excellent corrosion resistance in sulfuric acid, reducing and oxidizing media and has strong resistance to corrosion and erosion

ASME B16.5 Nickel Alloy Flanges Alloy 31 ASTM B564 UNS N08031 WN SO BL Flange 1. Information of Alloy 31 Alloy 31, N08031, 1.4562, Chemical composition(%) Carbon, max 0.015 Manganese, max 2.0 Phosphorus, max 0.020 Sulfur, max 0.010 Silicon, max 0.3 Nickel 30.0~32.0 Chromium 26.0~28.0 Molybdenum 6.0~7.0 Copper 1.0~1.4 Nitrogen 0.15~0.25 Iron balance Tensile strength(MPa, min) 650 0.2% Yield strength(MPa, min) 276 Elongation(%, min) 40 2. ASME / ANSI B16.5 Flanges Manufacturers

Alloy 31 Nickel Alloy Flange as ASME B16.5 ASME B16.47 EN1092-1 JIS B2220 1. ASME B16.5 ASME B16.5 Flanges Available Types ASME B16.5 Flange ASME B16.5 Face Flanges ANSI B16.5 ASME B16.5 Flanges ASME B16.5 Flange Dimensions ASME B16.5 ASME B16.5 Flanges ANSI B16.5 Class 150 ASME B16.5 Flanges Stainless Steel ASME B16.5 Flanges Suppliers SS ASME B16.5 Flange ASME B16.5 Flanges Dealer ASME B16.47 Series A and B ASME B16.5 Flanges Exporter ANSI B16.5 class 150 ASME B16.5 Flange

ASTM B564 UNS N02201 NICKEL 201 WN LWN SO SW BLIND FLANGE B16.5 1. ASTM B564 Standard introduction ASTM B564/ASME SB564 Standard Specification for Nickel Alloy Forgings UNS N04400 UNS N06600 UNS N06690 UNS N08120 UNS N08800 UNS N10276 UNS N06022 UNS N08367 UNS N06059 UNS N06058 UNS N10242 UNS N06686 UNS N12160 UNS N02200 UNS N10624 UNS N06603 UNS N06025 UNS N06045 UNS N06210 UNS N08811 UNS N06200 UNS N06219 UNS N08031 UNS N06230 UNS N06617 UNS N10629 UNS N08031 UNS N06045 UNS

UNS N08800 Incoloy 800 Spectacle Blind Orifice Plate Spacer Ring Paddle Blind 1.Spectacle blinds introduction Spectacle Blinds are generally applied to permanently separating pipesystems, or just to connect with each other. A Spectacle Blind is a steel plate cut into two discs of a certain thickness. The two discs are attached to each other by section of steel similar to the nose piece of a pair of glasses. One of the discs is a solid plate, and the other is a ring, whose

22"- 48" ASME B 16.47 Series A B Hastelloy B3 WN BL Nickel Alloy Flanges I. General Introduction ASME B16.47(Large Diameter Steel Flanges) is a standard for large diameter steel flanges sized from NPS 26 through NPS 60. The latest version provides dimensions and ratings in both metric and inch units. The ASME B16.47 inherently incorporate MSS SP-44: Steel Pipeline Flanges and API 605: Large Diameter Carbon Steel Flanges. Therefore, the MSS SP-44 flanges are designated as ASME

MSS DIN JIS BS ASME producing standard Hastelloy C2000 nickel alloy flange 1. Hastelloy C2000 nickel alloy flange material grade introduction Hastelloy C-2000 Alloy is assigned as UNS N06200 is the most flexible, corrosion resistant with incredible imperviousness to uniform corrosion in oxidizing or decreasing situations. Phenomenal imperviousness to push corrosion breaking and superior resistance to localized corrosion as compared to C-276 alloy. Hastelloy C2000 Alloy

N08926 inconel 926 1.4529 Forged Disc Ring SO Blind Threaded with neck flange 1. Inconel 926 Flanges Inconel 926 Disc Inconel 926 Ring Inconel 926 SO flange Inconel 926 Blind flange Inconel 926 Threaded with neck flange 2. Incoloy 926 Chemical composition: Alloy % Ni Cr Fe C Mn Si Cu Mo N Ti P S 926 Min. 24 19 Balance 0.5 6.0 0.15 0.6 Max. 26 21 0.02 2 0.5 1.5 7.0 0.25 1.2 0.03 0.01 3. Incoloy 926 Physical properties: Density 8.1 g/cm3 Melting point 1320-1390 ℃ 4. Incoloy 926

inconel 926 alloy 926 N08926 1.4529 SO BL SW TH LJ WN Welding Flange 1. Inconel 926 flangesInconel 926 SO flangeInconel 926 BL flangeInconel 926 SW flangeInconel 926 TH flangeInconel 926 LJ flangeInconel 926 WN flangeInconel 926 Slip-on flangeInconel 926 threaded flangeInconel 926 socket-welding flangeInconel 926 blind flangeInconel 926 lap-joint flangeInconel 926 welding-neck flange 2. Chemical Composition CMnPSSiNiCrMoCuNFealloy 926Min % 24,0019,006,000,500,15balanceMax %0

inconel 926 Nickel alloy 926 N08926 1.4529 Plate SO BL SW TH LJ WN Flange Disc Ring 1. Nickel price kg Chemical composition: Alloy % Ni Cr Fe C Mn Si Cu Mo N Ti P S 926 Min. 24 19 Balance 0.5 6.0 0.15 0.6 Max. 26 21 0.02 2 0.5 1.5 7.0 0.25 1.2 0.03 0.01 2. Incoloy 926 Physical properties: Density 8.1 g/cm3 Melting point 1320-1390 °C 3. Incoloy 926 Alloy Minimum Mechanical properties in the room temperature: Alloy state Tensile strength Rm N/mm2 Yield strength RP0.2N/mm2

ASME B16.5 150#-2500# 1/2"-24" forged Hastelloy B3 Nickel Alloy Flanges 1.Specifications of ASME B16.5 Class 2500 Flanges Size : 1/2"NB TO 60"NB IN Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. Face Type: Flat Face (FF), Raise Face (RF), Ring Joint (RJT) ASME B16.5 Class 2500 Flanges Type: Slip On Flanges Types Of Flanges: Weld Neck Flanges Slip On Flanges Blind Flanges Socket Weld flanges Threaded Flanges Orifice Flanges

ASTM B564 UNS N08031 Alloy 31 WN SO Orifice Flange ASME B16.36 1. Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. They are, for all intensive purposes, the same as weld neck and slip-on flanges with extra machining. Orifice flanges may be provided in one of three types of flanges: Welding Neck, Slip-On and Threaded. 2. Specification of Orifice Flange HT can Provide Size : ½" (15 NB)

nickel alloy flange Hastelloy C2000 forging ring disc sleeves as per drawing 1. Hastelloy C2000 forging ring disc nickel alloy flange dimension Product Name Hastelloy C2000 forging ring disc sleeves Material Hastelloy C2000 UNS N06200 Shape Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet Grade Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc

WN SO Blind ASTM B564 UNS N06200 nickel alloy flange Hastelloy C2000 1. SIX MOST COMMON TYPES NICKEL ALLOY FLANGE Hastelloy C2000 USED IN THE OIL AND GAS INDUSTRYWeld-neckComplete with a tapered hub, these flanges are recognisable and used in high pressure environments. The flange is particularly useful under repeat bending conditions.Slip-onA flange which is slipped over the pipe and welded both inside and outside to increase strength and prevent leakage. A favourite for

BS4504 BS10 ASTM B564 inconel 825 alloy incoloy 825 UNS N08825 DIN 2.4858 Pate/WN/Blank Flange 1. Flange Types ASTM B564 UNS N06825 Pipe Flange Incoloy 825 Raised Face Slip On Flange ASTM B564 Incoloy 825 Exhaust Flange ASME SB564 Incoloy 825 Slip On Plate Flange ASTM B564 UNS N06825 Header Flange 825 Incoloy Slip On Flange ASTM B564 Alloy 825 Plate Flange ASTM B564 UNS N06825 Pipe Flange ASTM B564 Incoloy 825 Backing Flange Incoloy 825 Exhaust Flange ASTM B564 UNS N06825

ASTM B564 inconel 825 alloy incoloy 825 UNS N08825 DIN 2.4858 forging ring 1. Types of ASTM B564 Incoloy 825 Flange Incoloy 825 Flange ASTM B564 Incoloy 825 Slip-On Flange ASTM B564 Incoloy 825 Threaded Flange ASTM B564 Incoloy 825 Weld Neck Flange ASTM B564 Incoloy 825 Socket Weld Flange ASTM B564 Incoloy 825 Blind Flange ASTM B564 Incoloy 825 Reducing Flange ASTM B564 Incoloy 825 Lap Joint Flange ASTM B564 Incoloy 825 Plate Flange ASTM B564 Incoloy 825 Orifice Flange ASTM

JIS B2220 ASTM B564 inconel 825 alloy incoloy 825 UNS N08825 DIN 2.4858 Welding/LJ/Threaded Flange 1. ASTM B564 Incoloy 825 Flanges Chemical Composition Grade C Mn Si S Cu Fe Ni Cr Incoloy 825 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00 2. ASTM B564 Incoloy 825 Flanges mechanical properties Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Incoloy 825 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa –