Tungsten Carbide Rod

Φ30x100mm Tungsten Carbide Rod Cemented Carbide Round Bars Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in

Welding cemented caribde round rods for end milling with grade YG8 Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in

Cemented Carbide Round solid Rods For End Milling Grade YG10 Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in

Metal tool parts tungsten carbide blank round bars solid rods with coolant holes Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide

Metal tool parts blank round bars solid tungsten carbide rods with coolant holes Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide

Copper Matrix Alloy Tungsten Carbide Hard-Facing Material for Welding Rods Brief Introduction Cold-rolled strip tube which filled with casting tungsten carbide.The power is made up by casting tungsten carbide which is injected in strop. which is highly recommended to surface parts in rode and high-way construction,mining,oil exploration and drilling and feed grinder hammer. Applications The deposit offers a very high wear resistance. The alloy system offers a unique re

Copper Matrix Alloy Tungsten Carbide Hard-Facing Material for Welding Rods Brief Introduction It is made of tungsten carbide particle and matrix alloy,we supply copper alloy matrix and nickel matrix alloy. Nicke matrix alloy is with higher hardnes and better wear resistance. Outside special flux and color is marking scrap grade,CO and WC is the main composition of sintering tungsten carbide,the hardness is HRA 89-91.This structure offers extremely effective protection against

Tungsten Carbide Hard-Facing Material for Welding,Tungsten Carbide Composite Welding Rod Brief Introduction It is made of tungsten carbide particle and matrix alloy,we supply copper alloy matrix and nickel matrix alloy. Nicke matrix alloy is with higher hardnes and better wear resistance. Outside special flux and color is marking scrap grade,CO and WC is the main composition of sintering tungsten carbide,the hardness is HRA 89-91.This structure offers extremely effective

Tungsten Carbide Composite Rods,Tungsten Carbide YD rods Brief Introduction 1.tungsten carbide brazing rods they are made of by sintering tungsten carbide scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to 690MPa, hardness HB≥160. Property 1.Carbide content: 65%,70% 2

Tungsten Carbide Tube Welding Rods with Crushed Tungsten Carbide Grits Brief Introduction 1.tungsten carbide brazing rods they are made of by sintering tungsten carbide scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to 690MPa, hardness HB≥160. Property 1.Carbide content: 65%

Copper Matrix Crushed Tungsten Carbide Composite Rods with Flux Brief Introduction 1.tungsten carbide brazing rods they are made of by sintering tungsten carbide scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to 690MPa, hardness HB≥160. Property 1.Carbide content: 65%,70% 2

Copper Matrix Crushed Tungsten Carbide Composite Rods with Flux Brief Introduction 1.Tungsten Carbide Composite Alloy Rod deposits an extremely durable protective coating comprising a dense mass of ultra-hard WC, embedded in a tough self fluxing Nickel alloy matrix. 2.This structure offers extremely effective protection against abrasive attack by a wide variety of hard and abrasive formations. 3.it is mainly used for surfacing welding the oil, mining, coal mining, geology,

24mm Tungsten Carbide Bars Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in machinery field. 4.Currently we're

Φ40 mm Tungsten Carbide Rods Hard Alloy Piston Rods With Strong Wear Resistance Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide

Φ30x100mm Tungsten Carbide Rod Cemented Carbide Round Bars Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.3 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in

10% Cobalt Alloy Bars Tungsten Carbide Rods Produced As Customer Design Main Features: M8 Threaded rods Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in machinery field. 4.Currently we're stably supplying carbide rods for more than10 professional cutting

h7 Tolerance Tungsten Carbide Rods Carbide Duct for Corrosion Fluid Main Features: M8 Threaded rods Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in machinery field. 4.Currently we're stably supplying carbide rods for more than10 professional cutting tools

Customized Hollow Tungsten Carbide Rods With Threaded Inner Holes Main Features: M8 Threaded rods Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide wear parts in machinery field. 4.Currently we're stably supplying carbide rods for more than10 professional cutting tools

YG8 / K30 Tungsten Carbide Spike for Glass Engraving Tools Property of our tungsten carbide rods Content: WC 94% Binder 6% Grain size: 1.2um Density: 14.85-15.00 g/cm³ Hardness: ≥HRA90.0 T.R.S≥1800N/m㎡ Dimensions of solid tungsten carbide rods Please contact us for more information on carbide rods with coolant hole. Dia(mm) Tol of Dia (mm) Length(mm) Tol of Length(mm) 0.5-12 +0.2/+0.4 1000/330/300/100 0/+5.0 12.5-20 +0.3/+0.6 1000/330/300/100 0/+5.0 20-40 +0.4/+0.8 1000/330

Φ12 X 330mm Tungsten Carbide Round Bar For Tungsten Carbide Cutting Tools Property of our tungsten carbide rods Content: WC 90% Binder 10% Grain size: 0.6-0.8um Density: 14.50-14.60 g/cm³ Hardness: ≥HRA91.5 T.R.S≥3600N/m㎡ Brief Introduction of Tungsten Carbide Rods: 1.Tungsten carbide rods are important blank material for tungsten carbide cutting tools. 2.Carbide cutting tools are widly used for machining of various kind of metal. 3.They are also important tungsten carbide