Medium Voltage Power Cables

Application: The single core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.8/6.6KV to 19/33KV and frequency 50Hz. They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations. Construction: Conductor Plain annealed copper or aluminium complying with IEC 60228/BS 6360

Application: Suitable for installations indoors: mostly in power supply stations and outdoors: in cable ducts, underground, and on cable trays for industries, switch-boards and power stations. Due to the good laying and mechanical characteristics, this cable is suitable when mechanical protection is required or in applications where mechanical damages are expected to occur. Cable Construction: ·Conductor Plain annealed stranded circular compacted copper conductor (Class 2)

Application: They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations. C onstruction: Conductor: Plain annealed copper,Stranded (Class 2)Conductor Screen: Extruded layer of semi-conducting cross-linkable compound.Insulation: cross-linked polyethylene compound XLPE or EPR.Insulaton Screen: Extruded layer of semi

Application: It is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable. Features: 1. Rated voltage: Uo/U: 26/35kV, 21/35kV, 12/20 kV (24 kV), 8.7/10kV, 8.7/15kV, 6/6kV, 6/10kV. 2. No.

20.8/36kV Single Core XLPE Insulated Aluminum cable for underground use 1x95/16mm2 The cables are suitable for permanent installation indoors, outdoors, in the ground, and in cable ducts.This product may only be installed by a qualified electrician. The product was developed in accordance with recognized standards. The applicable installation regulations must be applied. Construction Conductor: Copper or aluminum, Class 2: stranded conductor Conductor screen: Non-metallic,

18/30KV Single Core XLPE Insulated PE Sheathed Power Cable 1x300mm² NA2XS(FL)2Y This 18/30KV single core XLPE insulated PE sheathed power cable is designed for power distribution networks. Suitable for fixed outdoor installations where mechanical stress may occur, it features both longitudinal and radial water blocking properties. The cable performs well in unfavorable operating conditions, particularly where protection against water penetration is required following

MV power cable NA2XS(F)2Y 1x120mm2 12/20KV IEC60502-2 Product Description MV power cable NA2XS(F)2Y 1x120mm2 12/20KV IEC60502-2 Typically installed for utility grids, indoors and in cable ducts, outdoors, in the ground and underwater, as well as on racks for industrial installations, switchgear, and power plants. The durable PE sheath can withstand significant mechanical stress during installation and operation. The inner conductive layer between the conductor and the XLPE

MV Power Cable AWA Armored Type 1x70mm² 12/20KV Product Description MV power cable AWA armored type 1x70mm² 12/20KV is designed for power supply stations, indoor installations, cable ducts, protected outdoor laying, underground applications, and installation on cable trays for industrial facilities, switchboards, and power stations. Its excellent laying characteristics allow for easy installation even in challenging line pathways. The cable features an inner conducting layer

APPLICATION These cables are designed to be used for the supply of electrical energy in fixed applications up to the rated voltages at a nominal power frequency between 49Hz and 61Hz., they are suitable for use in distribution installation, electrical power station , they are applied for installation, outdoors, underground where subject to mechanical damage. STANDARD • AS/NZS 1429.1 VOLTAGE 6.35/11kV Cable Construction CONDUCTOR: Plain circular compacted copper(aluminium ) to

Application They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations. 0.6/1KV Aluminum Conductor XLPE Insulation PVC Sheath Armoured Single Core Power Cable Conductor: Aluminium Conductor Armoured: AWA Insulation: XLPE/PVC Cores: Single Core Section Area: 1.5mm2-1000mm2 Standard: IEC 60502, BS 7870, GB/T12706 or

Application: Used for power transmission and distribution line with voltage rated at 35kV and below. High and Medium voltage power cable for static application in ground, within and outside facilities, outdoor, in cable canals, in water, in conditions where cables are not exposed to heavier mechanical stress and tensile strain. Compared with PVC Insulated Power Cable, xlpe power cable boasts not only characteristics of excellent electricity, mechanism, heat and aging

Application Medium voltage single core cable is suitable for use in power networks, in fixed installation outdoors in cable ducts or directly in the ground. Cable operational stability is enhanced because of very low dielectric loss factor, excellent insulation property of XLPE and firm bonding with conductor screen and insulation screen of semi-conductive material (extruded in one process), which makes it widely used in transformer stations, electric power plants and

12/20KV CU/SC/XLPE/SC/CTS/AWA/PVC 1x150mm2 Single core Medinum Voltage Armored Power Cable APPLICATIONS: 12/20KV CU/SC/XLPE/SC/CTS/AWA/PVC 1x150mm2 Single core Medinum Voltage Armored Power Cable are with low dielectric losses used in energy networks with sudden load changes where mechanical stresses expected. Laid in residential or industrial areas, underground or in ducts. STANDARD: GB/12706.2, IEC60502-2,BS 6622 , VDE 0276, HD 620 S1,NFC 33-226, IS 1554 , IS 7098 and ICEA

Applications Medium voltage power cable for static application in ground, within and outside facilities, outdoor, in cable canals, in dry areas or in water. PE sheath secures increased mechanical resistance during and after laying. Swellable tape blocks water spreading within the cable. Due to its very low factor of dielectric loss, which remains constant over its entire operating lifetime, and owing to excellent insulation property of XLPE-material, firmly longitudinally

Description Medium voltage single core cable is suitable for use in power networks, in fixed installation outdoors in cable ducts or directly in the ground. Cable operational stability is enhanced because of very low dielectric loss factor, excellent insulation property of XLPE and firm bonding with conductor screen and insulation screen of semi-conductive material (extruded in one process), which makes it widely used in transformer stations, electric power plants and

8.7/15KV 3x240mm2 AL/SC/XLPE/SC/CTS/PVC Underground Cable Power Cable Unarmored IEC60502-2 8.7/15kV cable is common voltage in accordance with IEC 60502-2. Similar to all other voltages, it includes a copper wire screen and/or a layer or copper tape for equalising purposes. These screens provide a route to earth in the event of a fault current or insulation failure, taking a substantial proportion of the total fault current and providing a return path for the cable neutral.

Mv Cable 11kv 15kv 20kv 33kv 35kv Medium Voltage Power Cable 3 Core Copper Aluminum Conductor XLPE Insulated Armoured LSZH Electric Cable XLPE Cable APPLICATIONS: XLPE(Cross linked polyethylene) cable constitutes the best cable for transmission and distribution lines because of its excellent electrical and physical properties. These cables has the advantage of simplicity in construction, lightness in weight; convenience in application besides its excellent electrical, thermal

Product Description: Medium Voltage Power Cables are often used for distributing electrical power in medium voltage networks, such as in industrial facilities, commercial buildings, and residential areas.These cables are suitable for indoor, outdoor and buried installations. Features: 1. Conductor ( Copper, Aluminium) 2. Conductor screen 3. Insulation (XLPE, TR-XLPE) 4. Insulation screen 5. Copper screen ( Copper tape, Copper wire) 6. Wrapping tape 7. Outer sheath (PVC, PE,

Application: MV power is applied for electricity supply in power stations, public networks, and industrial plants for indoor and outdoor installation in dry and wet locations, on racks, in conduits and direct burial, if greater mechanical protection is required. Also, the Nylon sheath provides an excellent protection against termites. Features: Conductor: Plain Circular Compacted Copper(Aluminium) To As/Nzs1125 Maximum Continuous Operating Temperature: 90°C Conductor Screen:

Product Description: Medium Voltage Power Cables are often used for distributing electrical power in medium voltage networks, such as in industrial facilities, commercial buildings, and residential areas. These cables are suitable for indoor, outdoor, and buried installations. On earth, in ducts, on cable trays, where no mechanical damages or mechanical tensile strains are expected. As distributive cable in urban and rural networks. As connecting cable for industrial plants.