Overhead Insulated Cable

0.6~1kV Low Voltage XPLE insulated Aerial Bundled Cables 3x25MM2 IEC 60502 Application The cables are intended for overhead power lines and input wires with voltages up to 0.6/1 kV inclusive. Used for hanging works such as street lighting, outdoor lighting and temporary construction maintenance. which increases the safety and reliability of using electrified wire mesh. Cable Construction Phase conductor: Aluminum stranded (AAC) Neutral conductor: Aluminum stranded (AAC),

0.6/1kv Overhead Insulated Cable AAC/XLPE+AAAC/XLPELow Medium Voltage Twisted Aerial Overhead ABC Cable Application Aerial Bundled Cable(overhead cables)is applied for elelctric power distribution in low voltage metropolitan,suburban and rural networks,for public lighting and house connections.Laid on pillars and house fronts. Cable Construction 1.Conductor: Stranded Aluminium wire conductor 2.Insulation:XLPE (cross-linked polyethylene)or PE (weather resistant) 3.Insulation

Product Description: MV tree cable. This type of cable is commonly used in power distribution systems, especially in urban and rural areas, to supply medium-voltage power to various locations from a single source. Technical Parameters: 3-Layer 15kV ACSR Tree Wire Size (AWG or kcmil) Stranding Conductor Diameter (mils) Covering Thickness (mils) Cable O.D. (mils) Conductor Shield Inner Layer Outer Layer 4 6/1 250 15 75 75 580 2 6/1 316 15 75 75 646 1/0 6/1 398 15 75 75 728 2/0

Product Description: Covered Aerial MV Cable – Installed with other Covered Aerial MV cables and a supporting messenger through a series of space-maintaining devices (spacers). The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation, which is particularly useful in congested areas. Tree Wire – Used for spans where trees crowd the right-of-way, such as in wooded residential areas, when a minimum of interference with

Product Description: Covered Aerial MV Cable – Installed with other Covered Aerial MV cables and a supporting messenger through a series of space-maintaining devices (spacers). The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation, which is particularly useful in congested areas. Tree Wire – Used for spans where trees crowd the right-of-way, such as in wooded residential areas, when a minimum of interference with

Product Description: Tree wire or covered open wire consists of the conductor (aluminum, aluminum alloy, or ACSR ) and the extruded covering (conductor shield, low-density inner layer, and protective outer layer). Covering thickness depends on the system voltage. Technical Parameters: 3-Layer 15kV AAAC Tree Wire Size (AWG or kcmil) Stranding Conductor Diameter (mils) Covering Thickness (mils) Cable O.D. (mils) Conductor Shield Inner Layer Outer Layer 4 7 250 15 125 125 780 2

Product Description: Used for primary and secondary overhead distribution where limited space is available or desirable for rights of way. Installed as an uninsulated conductor; however, covering is effective in preventing direct shorts and instantaneous flashovers should tree limbs or other objects contact conductors in such proximity. The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation; particularly useful in

NFC 33-209 Aerial Bundle Conductor ABC Cable 3x95+54.6+16mm2 ABC Cable 3x95+54.6+16mm2 Application Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire hazards. The XLPE covering contains a high level of carbon black for UV resistance. It is designed for where reliability, safety and low installation cost are required, but it is only for short spans

Application: Primarily used for 120 volt overhead service applications such as street lighting,outdoor lighting,and temporary service for construction.To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75oC for polyethylene insulated conductors or 90oC for crosslinked polyethylene(XLP)insulated conductors. Construction: Model NO. AAC AAAC Current DC & AC Insulation Material XLPE Sheath Material None Certification ISO, CCC,

Application Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire hazards. The XLPE covering contains a high level of carbon black for UV resistance. It is designed for where reliability, safety and low installation cost are required, but it is only for short spans due to increased weight. Cable Construction 1. Phase Core Conductor: Aluminum 1350

OVERHEAD XLPE COVERED CABLE CCSX CABLE 35KV AAAC/SC/XLPE 1X185MM2 EN50397 APPLICATION : OVERHEAD XLPE COVERED CABLE CCSX CABLE 35KV AAAC/SC/XLPE 1X185MM2 EN50397 are used for primary and secondary overhead distribution where limited space is available or desired for rights-of-way. Installed the same as bare conductors, however, covering cable is effective in preventing direct shorts and instantaneous flash overs should tree limbs or other objects contact conductors in such

OVERHEAD INSULATED CABLE 15KV AAC/SC/XLPE 1X120MM2 EN50397 APPLICATION : Medium voltage overhead construction is similar to bare wire construction except the cables are insulated. These cables are usually supported by polymeric pin insulators or polymeric post insulators and terminated using deadends. Lightning protection is essential to prevent insulation breakdown at support positions during the passage of lightning surges. Temperature : - Normal operation 90°C. - Emergency

APPLICATIONS Aerial bundled cable AAC/XLPE, AAAC/XLPE NTP 370.254 CAAI 3x35+1x16+NA1x25mm2 are cables for overhead line power, they are made by combining multiple single core cables together. Construction: 1. Conductor: Aluminium 1350, class 2. 2. Insulation: Cross linked polyethylene XLPE. 3. Public lighting: Aluminium 1350 insulated with cross-linked polyethylene XLPE. 4. Insulated neutral messenger: AAAC - All Alloy Aluminium 6201 - XLPE. Electrical characteristics Rated

0.6/1kV Aerial Bundled ABC AL/XLPE ABC Cable 3x35+54.6mm2 IEC 60502 BS 7870 NFC 33-209 Product Description Rated voltage: 0.6/1kV Overhead Cable Conductor: Aluminum Insulation: XLPE/PVC/PE Service wire: Phase Conductor+ Neutral Conductor Standard: IEC 60502 BS 7870 NFC 33-209 Application of Tripelx ABC Cable Triplex Service Drop ABC Cable is a very innovative concept for overhead powerdistribution as compared to the conventional bare conductor overhead cable. Property System

Duplex service drop cable Whippet 1x4awg+1x4awg overhead insulated cable ICEA S-76-474 Application: Duplex Service Drop Aluminum Conductor cable is designed for use to supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75ºC maximum for polyethylene insulation or 90ºC maximum for cross linked insulation. Structure Conductor material: aluminum; Insulation

Duplex service drop cable Shepherd 1x6awg+1x6awg aerial bundled cable ICEA S-76-474 Application: For aerial reticulating to residential, rural and uncleared areas where reliability, safety and low installation costs are required. Other benefits include: Reduction of bushfire hazards and frequency of tree lopping. Structure Conductor material: aluminum; Insulation material: XLPE; Temperature range Minimum installation temperature: 0°C Maximum operating temperature: +80°C

33KV 1Cx240qmm AAAC conductor XLPE insulated HDPE sheathed overhead insulated cable Description of 33KV 1Cx240qmm AAAC conductor XLPE insulated HDPE sheathed overhead insulated cable Construction: AAAC/SC/XLPE/HDPE (1) Conductor: Aluminium alloy (class 2, compacted circular) (2) Conductor screen: Semi-conductive compound (3) Insulation: XLPE (4) Outer sheath: HDPE Cable identification: - Insulation: Natural or black color of XLPE - Outer sheath: Black 33KV 1Cx240qmm AAAC

Product Description: Its rated voltage of 15KV, 25KV, and 35KV makes it ideal for use in medium to high voltage power systems. The cable has a Polyethylene (PE) or Cross-linked Polyethylene (XLPE) inner layer, which is black in color and weather-resistant. This feature makes it ideal for use in different weather conditions, including harsh weather. The Overhead Insulated Cable product is available in both non-compacted or compacted All Aluminum Alloy Conductor (AAAC) options.

Product Description:The Conductor Shield of the Overhead Insulated Cable is made of Semi-conducting Cross Linked Polymer, which provides excellent protection against electrical interference, corrosion, and moisture. This ensures that the cable operates at optimal performance levels, even in harsh environments.The Outer Layer of the cable is made of HDPE (High-Density Track-Resistant Crosslinked Polyethylene). This material is highly resistant to impact, abrasion, and

Product Description: The cable's outer layer is made of HDPE, which stands for High-Density Track-Resistant Crosslinked Polyethylene. This material is known for its excellent track resistance, which is important in high-voltage applications. The HDPE layer also provides excellent protection against weathering, abrasion, and chemical corrosion, making it highly durable. The conductor of our Overhead Insulated Cable is made of either aluminum, aluminum alloy, or ACSR. We also