Fiber Optic Patch Cord

4 Core FTTH Fiber Optic Patch Cord in Paper Spool with Small Wall Mount Box Description 4 Core FTTH Fiber Optic Patch Cord in Paper Spool with Small Wall Mount Box manufactured by ANC International Co., Limited has customized LC/APC, SC/UPC, SC/APC, LC/PC, FC/PC etc connectors with small termination box on one end, and the other end leaves open, without connector for splicing to fiber distribution box or racks. The length of the FTTH fiber optic patch cord can be 20m, 25m,

Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg in Various Length Description Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg manufactured by ANC International Co., Limited has customized SC, SC/APC, LC/PC, FC/PC etc connectors on both ends. The length of the FTTH drop cable is 20m, 25m, 30m, 50m, 70m, 100m or other customized length. This FTTH drop cable has pull leg on the open end of the cable, thus cable can easily be pull out during installation

LC Fiber Optic Loopback Test Cable Available in SM, OM1, OM2, OM3, OM4, OM5 Cable Description: LC Fiber Optic Loopback Test Cable manufactured by ANC International Co., Limited is available in SM, OM1, OM2, OM3, OM4, OM5 Cable type. Fiber optic loopback cables incorprate two fiber optic connectors and they are plugged into the output and input port of the equipment respectively so that a signal can be sent from a communication device and looped back to the device as a way to

Mode Conditioning Fiber Optic Patch Cord with LC SC FC ST MU Connectors Description Mode Conditioning Fiber Optic Patch Cord (MCP) manufactured by ANC International Co., Limited is used typically when client wants to run Gigabit Ethernet (LX) over some multi mode fiber optic plant. Launching a singlemode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused

SM G652D Fiber Optic Attenuated Patch Cord Simplex LC to SC 10dB Description SM G652D Simplex LC to SC 10dB Fiber Optic Attenuated Patch Cord manufactured by ANC International Co., Limited is designed to attenuate an optical signal, usually to keep the detector response in the linear region. Attenuated patch cords can be installed in place of conventional patch cords to provide a constant level of attenuation with a return loss of >50 dB. The attenuated patch cord can be used

SC SCAPC LC FC ST Simplex Armored Fiber Optic Patch Cord Description Simplex Armored Fiber Optic Patch Cord manufactured by ANC International Co., Limited can be made with LC, SC, FC, ST, LC/APC, SC/APC, FC/APC and other types of connectors. Armored fiber optic cable with built-in helical stainless steel tape over a buffered fibre can provide stronger protection of the optical fibers than standards fiber optic cables. The rugged armored cables allow optical fiber to be

SM OM3 OM4 LC Uniboot Patch Cord, Non-Switchable Description SM OM3 OM4 LC Uniboot Patch Cord manufactured by ANC International Co., Limited is constructed for duplex transmission within a single 2.0mm or 3.0mm cable with two fibers in one physical cable. This design delivers maximum connectivity performance in a minimal footprint according to standards, saves upto 50% space in cabling volume and allows easier maintenance and operability. LC uniboot patch cord is used to

Self-supporting Outdoor FTTH G657A1 or G657A2 SCUPC SCAPC Drop Fiber Optic Patch Cord Description Self-supporting Outdoor FTTH G657A1 or G657A2 SCUPC SCAPC Drop Fiber Optic Patch Cord manufactured by ANC International Co., Limited is mainly used for Fiber to the home, Face plate, terminal box, ONU, etc applications. It can be 10meter, 30meter, 50meter, 100meter, 200meter or any customized length. The cable diameter is 2mm x 5mm flat design, with 1core bare fiber or 2 core

3.0mm LC Flexible Boot Fiber Optic Cable Assemblies in White Black Red Blue Colors Description 3.0mm LC Flexible Boot Fiber Optic Cable Assemblies manufactured by ANC International Co., Limited utilize specialized flexible boots that can be bent in a variety of angles including 90° without exceeding the recommended bend tolerances of the cable. The Flex-Angle boot is designed to bend and maintain any angle or direction from straight to 90°. The boot is molded over a single

FC To LC Fiber Optic Patch Cord LSZH Duplex 3.0mm OM1 OM2 OM3 OM4 OM5 Description LSZH Duplex 3.0mm OM1 OM2 OM3 OM4 OM5 FC to LC Fiber Optic Patch Cord manufactured by ANC International Co., Limited can be used as cross-connect jumpers. All fiber optic patch cords are 100% factory tested for insertion loss and return loss to ensure transmisson performance per ANSI/TIA-568-C.3 standard specifications. Patch cords can be terminated with LC, SC, FC, ST, MTRJ, E2000, SMA, etc any

Industrial Fiber Optic Patch Cord Multimode OM1 OM2 OM3 OM4 OM5 SMA 905-ST Description Multimode OM1 OM2 OM3 OM4 OM5 SMA 905-ST Fiber Optic Patch Cord manufactured by ANC International Co., Limited has low insertion loss and high return loss. The ferrule design of the SMA connector is engineered for large core fibers. Except regular 126-130um SMA ferrule inner diameter, SMA connector has also 200um, 400um, 600um or 1000um inner diameter optional. The large core SMA connector

LC To SC Fiber Patch Cable Violet OM4 50 / 125 Duplex Bend Insensitive Description Violet OM4 50/125 Duplex Bend Insensitive LC SC Fiber Optic Patch Cord manufactured by ANC International Co., Limited uses OM4 Laser-Optimized Multimode Fiber inside, it is mainly used for 40G/100Gb Ethernet applications. The 40G signal can transmit 150m at 850nm; and 100G signal can transmit 100m at 850nm on this OM4 fiber.This 50/125um OM4 multimode fiber optic cable is less attenuation when

PDLC ODVA Duplex LC Fiber Optic Patch Cord IP67 Outdoor for 3G 4G Base Station Description IP67 Outdoor PDLC ODVA patch cord manufactured by ANC International Co., Limited is widely used for RRU, base station, FTTA and outdoor waterproof conditions. This patch cord is normally has waterproof LC connector, such as PDLC, or ODVA LC connector on end side, the other side is standard duplex LC connector with or without armored tube. This IP67 outdoor PDLC patch cord is suitable

UPC Fiber Optic Patch Cord LSZH SM Duplex 2.0mm LC UPC - HS LX.5 Space Saving Description LSZH SM Duplex 2.0mm LC UPC-HS LX.5 UPC Fiber Optic Patch cord manufactured by ANC International Co., Limited has low insertion loss and high return loss. LC and LX.5 connector both use 1.25mm diameter ceramic ferrule inside, it is smaller in size compared with SC, FC, ST, etc and it is getting more and more popular in data centers, enterprise networks, telecom rooms, cloud storage

SC/APC-SC/APC Duplex Fiber Optic Patch Cord, G652D G657A1 G657A2 Fiber Optional Description SM G652D G657A1 G657A2 SC/APC-SC/APC Duplex Patch Cord manufactured by ANC International Co., Limited has low insertion loss and high return loss. SC fiber optic patch cord uses 2.5mm ceramic ferrule inside the SC connector, it is one of most commonly used patch cord in fiber optic network. Except SC patch cords, ANC can produce FC, ST, LC, MTRJ, MU, SMA, MPO, DIN, E2000, IP67,

Data Center Uniboot Lc To Lc Fiber Patch Cable Switchable SM OM3 OM4 With Pull Leg Description Switchable SM OM3 OM4 Uniboot LC-Uniboot LC Patch Cord with Pull-leg manufactured by ANC International Co., Limited is ideal for ultra high density data center applications. This uniboot LC patch cord uses round 2.0mm or 3.0mm jacket cable with two bare fiber inside, this structure can greatly reduce cable space, improve jumer management and routing compared to standard zipcord

LSZH Singlemode Fiber Optic Patch Cables LC/UPC to LC/UPC Yellow 3 Meter Description LSZH SM Duplex LC/UPC-LC/UPC Patch Cord 1m, 3m with 2.0mm or 3.0mm cable manufactured by ANC International Co., Limited has low insertion loss and high return loss. LC connector uses 1.25mm diameter ceramic ferrule inside, it is smaller in size compared with SC, FC, ST, etc. The SM fiber can transport data for up to 10km at 1310nm, or up to 40km at 1550nm. This SM LC-LC Duplex Fiber Optic

SM Simplex Fiber Optic Patch Cable 1.6mm 2.0mm With Short Boot / Standard Boot Description SM Simplex 1.6mm 2.0mm LC/UPC-LC/UPC Patch Cord with Short Boot or Standard Boot manufactured by ANC International Co., Limited has low insertion loss and high return loss. LC connector uses 1.25mm diameter ceramic ferrule inside, it is smaller in size compared with SC, FC, ST, etc and it is getting more and more popular in data centers, enterprise networks, telecom rooms, cloud storage

OEM SM Duplex Fiber Optic Patch Cord Single Mode G652D G657A1 G657A2 Customized Description OEM SM G652D, G657A1, G657A2 SC/PC to SC/PC Duplex Fiber Optic Patch Cord manufactured by ANC International Co., Limited has low insertion loss and high return loss. We have more than 100 workers in Shenzhen to produce 36000pcs terminators per day. Our skilled workers and quality control department work closely together to guarantee every piece of our fiber optic patch cord is

SC/APC-SC/APC Duplex Fiber Optic Patch Cord, G652D G657A1 G657A2 Fiber Optional Description SM G652D G657A1 G657A2 SC/APC-SC/APC Duplex Patch Cord manufactured by ANC International Co., Limited has low insertion loss and high return loss. SC fiber optic patch cord uses 2.5mm ceramic ferrule inside the SC connector, it is one of most commonly used patch cord in fiber optic network. Except SC patch cords, ANC can produce FC, ST, LC, MTRJ, MU, SMA, MPO, DIN, E2000, IP67,