Sucker Rod Pump

Chinese API sucker rod pump Mechanical seating or cup seating sucker rod pump description Rod pump should be installed inside the tubing with the sucker rod.The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. It is not necessary to pull the tubing out of the well when checking the pump, which can make the operation easier and quicker. According to seating mode, the rod pump can be divided

Chinese API sucker rod pump Sucker Rod Pump Main parts process and material: Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ordinary carbon steel carburizing (B2), low alloy steel nitride (B5). Plunger: 1045 steel spraying (B1), 1045 steel spraying (B2), 1045 steel chrome plating (A1), 1045 steel double chrome plating (A2). Valve ball and seat: stainless steel (A1), cobalt chromium (B2), tungsten carbide (C1), nickel and carbon

Chinese API sucker rod pump Sucker Rod Pump The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. Thus it is convenient for the inspection and workover because they can be pulled up and down through the tubing and suitable for deeper well. The life span of tubing can be prolonged for decrea sing the times of the thread of the tubing being turned on and off and the time of the workover. The

Chinese API sucker rod pump The thickness of barrel wall is 3.175mm,it is suitable for the well conditions of small tubing size and need big demand of pump diameter .It can be designed according to the customer’s well . China manufacturer produced down hole insert sucker rod pump 1. API-11AX & Non-API Rod, Tubing & Specialty pumps 2. Subsurface pump & pump fittings Customized Service. 3. Complete pump model, high quality & pump efficiency. 4. Chrome-plated barrel, Spray-metal

Chinese API sucker rod pump The thickness of barrel wall is 3.175mm,it is suitable for the well conditions of small tubing size and need big demand of pump diameter .It can be designed according to the customer’s well. Material selection: API Spec. 11AX was modified to add not only new sizes and types of pumps with new quality, inspection, and tolerance requirements, but also standardized, widely used pump-component materials. Various material descriptions, their API

Chinese API sucker rod pump Sucker Rod Pump For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the plunger into the barrel with sucker rod. Given the tubing size, the bore of the tubing pump is larger than that of the rod pump, so the pump rate is higher. According to seating mode, the rod pump can be divided into three types: THC pump (Stationary Heavy Wall, Cup Seating, Tubing pump), THM pump (Stationary Heavy Wall Mech.

Chinese API sucker rod pump Petroleum Equipment API 11AX cobalt base valve balls and seats downhole equipment sucker rod pump barrel tube 1. API-11AX & Non-API Rod, Tubing & Specialty pumps 2. Subsurface pump & pump fittings Customized Service. 3. Complete pump model, high quality & pump efficiency. 4. Chrome-plated barrel, Spray-metal Plunger, Carbide/SS valve. 5. Applied to the oil well containing corrosive medium such as salt sulfur, carbon dioxide and bacteria and the

Chinese API sucker rod pump Mechanical seating or cup seating sucker rod pump description Rod pump should be installed inside the tubing with the sucker rod.The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. It is not necessary to pull the tubing out of the well when checking the pump, which can make the operation easier and quicker. According to seating mode, the rod pump can be divided

Chinese API sucker rod pump Sucker Rod Pump Product performance standard: API 11AX 1. Subsurface Sucker Rod Pump 1.1 Rod Pump: A lso referred to as “ insert pump” as it is installed inside the tubing it is not necessary to run and p ul l the tubing out of the well when checking pump . It can enter the tubing with the sucker rod and set, which can greatly reduce the operation cost. According to the setting mode, it is divided into a cup setting and a mechanical setting, and is

Chinese API sucker rod pump For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the plunger into the barrel with sucker rod. Given the tubing size, the bore of the tubing pump is larger than that of the rod pump, so the pump rate is higher. According to seating mode, the rod pump can be divided into three types: THC pump (Stationary Heavy Wall, Cup Seating, Tubing pump), THM pump (Stationary Heavy Wall Mech. Seating, Tubing

Chinese API sucker rod pump Comparing with conventional tubing pump, The API Tubing Pump has better performance in corrosion resistance & antifriction aspects. Plunger of it is nickel plated on alloy base, inside wall of barrel is plated hard cadmium, key parts, such as valve hood, valve ball, are made of materials with excellent mechanical performance and corrosion resistant property. Compared with conventional pump, the series of pump has a longer working life. Model mm(in)

API standard oilfield tubing pump Product description: During the operation of a rod - having pump in a well, an API standard subsurface sucker rod pump plays a significant role as an essential equipment for oil production. This pump can be categorized into two types: tubing pump and rod pump. Specification table: 1 2 3 4 5 Type of Pump Letter Designation Metal Plunger Pumps Soft-Packed Plunger Pumps Heavy-Wall Barrel Thin-Wall Barrel Heavy-Wall Barrel Thin-Wall Barrel Rod

API 11AX DOWNHOLE SUCKER ROD PUMP Product Description Various pumps and spare parts conform to API SPEC 11AX, and special pumps can be designed and manufactured such as heavy crude oil pumps, sand-proof pumps and Gas-proof pumps according to the requirements of users. Key parts of the pumps can be made of materials with strong corrosion-resistance and excellent mechanical properties conform to NACE stdMR-01-76 according to various well conditions. Barrel Type: 1. Plating

API 11AX sucker rod pump Description of oil pump: We can provide API pump and special pump API pump: RHAC, RHBM, RHAM , RTH(B)C, TH(B)M, RWBM, RWBC, RWAM, RWAC R, RHBM-A, RHBC R For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the plunger into the barrel with sucker rod. Given the tubing size, the bore of the tubing pump is larger than that of the rod pump, so the pump rate is higher. According to seating mode, the rod pump

API 11AX DOWNHOLE SUCKER ROD PUMP Product Description Our range of pumps and spare parts adhere to the specifications outlined in API SPEC 11AX. Additionally, we have the capability to design and manufacture special pumps to meet specific user requirements. These include heavy crude oil pumps, sand-proof pumps, and gas-proof pumps, catering to different operational environments. To ensure durability and performance in various well conditions, key components of our pumps can

API standard oilfield tubing pump Product Description: During the operation of a rod-having pump in a well, an API standard subsurface sucker rod pump plays a significant role as an essential equipment for oil production. The subsurface sucker rod pump can be categorized into two types: tubing pump and rod pump. Specification table: 1 2 3 4 5 Type of Pump Letter Designation Metal Plunger Pumps Soft-Packed Plunger Pumps Heavy-Wall Barrel Thin-Wall Barrel Heavy-Wall Barrel Thin

API 11AX sucker rod pump API 11AX 25-175 RHAM-12-2-2 Diameter 44mm Insert Pump Oilwell Sucker Rod Pump Product Description Description: Rod pump: A sucker rod pump is also referred to as an "insert pump" as its plunger is attached to and moves up and down with the sucker rod string. sucker rod pump is suitable for reducing the time of workover for deep wells as it is not necessary to pull all the tubing out of the good hole when checking the pump, which makes the operation

API 11AX sucker rod pump API 11AX Downhole Insert Rod Sucker Rod Pump For Deep Oil Well Product Description For this type sucker rod pump, the barrel is put in the well to the designed depth with tubing. And then put the plunger into the barrel with sucker rod. Given the tubing size, the bore of the tubing pump is larger than that of the rod pump, so the pump rate is higher. According to seating mode, the rod pump can be divided into three types: Stationary Heavy Wall, Cup

API 11AX sucker rod pump API 11AX 25-175 RHAM-12-2-2 Diameter 44mm Insert Pump Oilwell Sucker Rod Pump Product Description Description: Rod pump: The Sucker Rod Pump, also known as the "insert pump," is designed with a plunger that is connected to and moves up and down with the sucker rod string. This type of pump offers certain advantages. For instance, Sucker Rod Pump is particularly useful in deep wells where minimizing workover time is crucial. When inspecting the pump,

API 11AX DOWNHOLE SUCKER ROD PUMP Product Description Various pumps and spare parts conform to API SPEC 11AX, and special pumps can be designed and manufactured such as heavy crude oil pumps, sand-proof pumps and Gas-proof pumps according to the requirements of users. Key parts of the pumps can be made of materials with strong corrosion resistance and excellent mechanical properties conform to NACE stdMR-01-76 according to various well conditions. Barrel Type: 1. Plating