Switch Life Tester

IEC 60884-1 Figure 27 and 42 Low Temperature Impact Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on. This device is used to check the impact resistance at low temperature of electrical accessories, as well as wires and cables. Equipment characteristics: This device should be used with low temperature chamber, the device should be placed

IEC 60884-1 Chapter 19 Temperature Rise Test Plugs Product information: The temperature rise plugs confirm to requirements of IEC60884 standard 19 Chapter. Temperature insulating plugs are designed according to different country's standards. With brass bolts, having a predetermined minimum size of the plug pins. Usage: Please refer to relative standard requirements. Note: Need to connect with wire at least 1m when processing testing. Configuration of BS1363 temperature rise

IEC 60884-1 Clause 23.4 40A Load Cabinet for Flexible Cable Flexing Test Apparatus Product information: This load cabinet meets the requirements of IEC60884-1 clause 23.4, UL and etc. It is used to supply test current for power lines, cables and electrical materials which required test current under 40A. The device has six output current loop, the voltage is adjustable between loops. The test machine uses imported instruments, has rational layout and beautiful appearance, the

IEC 60065 Figure 2C Telecom Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc. It is used to check whether the bare parts of TNV circuits of information technology equipment have sufficient protection. There is a M6 thread on the end of the handle, through where the test probe can be connected with a force gauge to achieve required force.

IEC 60065 Harden Steel Test Plug for Mechanical Tests on Antenna Coax Sockets Product information: The test plug for mechanical tests on antenna coax sockets conforms to IEC60065:2014 clause 12.5 Figure 9. It is used to verify the antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ACCESSIBLE parts shall be constructed so as to withstand such mechanical stresses as may be expected in the intended use.

IEC 60950 250N or 100N Force Stainless Steel Ф30 mm Diameter Thrust Rod Product Overview: The thrust rod conforms to IEC 60950: 2013 clause 4.2.4, IEC 60065:2005 clause 9.1.7 c), IEC 60884.1-2002 and etc. It is used to process steady force test to external enclosures. Technical Parameters: Diameter of circular plane surface of force applied Ф30 mm Applied steady force 250 N ± 5 N or 100 N ± 5 N Rod material Stainless steel Handle material Nylon Operation steps: Please refer

IEC 60884-1 Figure 11 Conductors Undue Damage Checking Test Apparatus Standard: IEC60884-1 clause 12.2.5, figure 11. Application: It is used to check terminals with screw clamping shall be so designed and constructed that they clamp the conductor(s) without undue damage to the conductor(s). Test sample: Plugs and socket-outlets terminals. Technical Parameters: Model SN2111 Test rate 10±2 RPM Diameter of gyration 75mm Test times 0～9999 Test weights 0.3, 0.4, 0.7, 0.9, 1.4, 2kg

IEC 60884-1:2022 Label Marking Abrasion Test Apparatus For VDE Type Plug Socket Product Information For Label Marking Abrasion Test Apparatus: This label marking abrasion test apparatus conforms to IEC 60884-1: 2022 Clause 8.8 figure 5, IEC 60669-1: 2017 Clause 8.9, etc. Technical parameters For Label Marking Abrasion Test Apparatus: Test stations 2 stations Test stroke 10-60mm, adjustable(Manually adjustable) Speed 5-60 times /min, adjustable Counter 0-9999 adjustable

IEC 60947-1 Circuit Breaker Tripping Characteristics Comprehensive Testing Machine Product Information For Circuit Breaker Tripping Characteristics Comprehensive Testing Machine: The test equipment is designed and manufactured according to the standard requirements of IEC60898-1 clause 9.10, IEC60947-1 clause 7.2.1 and etc. It is made to verify that the circuit-breaker complies with the requirements, which apply 1.13 times, 1.45 times, and 2.55 times the rated current to test

Optical Measuring Instrument Product overview: This PEAK 1983 series optical measuring instrument is with coated optical lens, the image is transparent and clear. And it with a variety of scale measurement, measurement more plus precision, a wide range of uses. Model for selection: Model: PEAK 1983-10X Magnification: Standard 10X Scale type: NO.1/NO.2/NO.13 (choose one of it, please state which one is needed before placing order) Minimum scale (div.): 0.1mm Max. measurement

Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC 60884-1:2013, IEC 60669-1: 2017, IEC 60335-1:2020, etc. Application:It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers. Test sample:Electrical outlet or similar electrical appliances and other hazardous live

Digital Protractor Measuring Tool Used To Measure Angles With High Precision And Accuracy Product Information: A digital protractor is a measuring tool used to measure angles with high precision and accuracy. It is an electronic version of a traditional protractor, incorporating digital technology for ease of use and enhanced functionality. Here are the key features and characteristics of a digital protractor: Display: A digital protractor features a digital display that

Anti - Shock Probe Experiment Device Used With The Testing Probe IEC 60335-1 Product Information For Anti - Shock Probe Experiment Device: This anti-shock probe experiment device is designed and manufactured meet the requirements of the standard of IEC60335-1 Clause 8.1.4, IEC 60065:2014 clause 9.1.1.2, and etc. It is used together with the testing probe for checking whether the probe can contact the live parts of electrical appliance, to verify the protection of persons

Product Information: The Calibration Device for Spring Hammer Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-75:1997 Annex B, IEC60068-2-63:1997 Annex A, and etc. The device is used to detect the impact energy of the Spiring Hammer Tester. When the spring hammer is released, it impacts on the pendulum rod on the calibration device, and the

IEC 60669-2-1 Self-ballasted Lamp Load Cabinet Single Station For Switches On-off Capability Test The load cabinet conforms to the requirements of IEC60669-1:2017 clause 19.3 and IEC60669-2-1:2021 clause 19.106. It is suitable for the on-off capability and normal operating life test of switches for household and similar fixed electrical installations. Especially suitable for switches intended for self-ballasted lamp loads, which should withstand the electrical and thermal

UL 2594 Low-temperature Constant-temperature Water Baths 25L Temperature Range -20~100℃ This low-temperature constant-temperature water bath is designed for universities, medical institutions, food processing plants, petrochemical facilities, public health departments, environmental monitoring agencies, and research institutions. It supports the cultivation of various liquid and solid compounds, including biological, chemical, and cell culture materials. The unit features a

IEC 60811-1-4 Clause 8.5 Low Temperature Impact Test Apparatus For Cable Impact Resistance Test Product Information: Standard: IEC60811-506, IEC60811-1-4 clause 8.5, IEC60884-1 and VDE0620, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4: Methods for general application-Test at low temperature. Application: For assessing the impact resistance of electrical accessories at low temperature, it is also used to assess the impact

IEC 61386-1 Clause 12 Figure 8 Test Apparatus For Resistance To Heat For Corrugated Pipes Product information: It is suitable for heat resistance testing of various semi-rigid casings and corrugated pipes to determine the required heat resistance value of the pipe and thereby determine its heat resistance strength. It complies with GB/T14823.2 "Special requirements for conduits for electrical installation-rigid insulating material flat conduits". and JG3050 "Insulated

IEC 61386-1 Figure 8 Heat Resistance Test Apparatus for Conduits and Corrugated Pipes Product information: The Test Apparatus for Resistance to Heat is specially designed for evaluating the heat resistance performance of semi-rigid conduits, flat casings, and PVC corrugated pipes. It determines the required deformation resistance under elevated temperatures, ensuring the product meets mandatory quality and safety standards. The test system complies with GB/T 14823.2, JG 3050,

IEC 60335-2-27 Clause 22.103 Φ100mm Cylinder Rod for Emitter Protection Testing Equipment Product Overview The IEC 60335-2-27 Clause 22.103 Emitter Protection Test Probe is a specialized test probe designed for evaluating the protection of emitters used for full-body exposure or intended to be positioned over a person. The probe simulates accidental contact or mechanical impact conditions that may occur during operation. It features a 100 mm ±1 mm diameter cylindrical probe