Auto Strong Chuck

High speed and light weight type strong finger chuck for aluminum wheel All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA, B5-9 type A spindles. UNIT: mm SPEC Model Applicable Wheel Size Out Dai. Of Chuck (mm) Available Spindle Nose Max.Pull Force (kgf) Max. Gripping Force (kn) Max.Operating Pressure Mpa (kgf/cm2) Max.Speed (r.p.m.) Weight (Without Jigs) (kg)

High speed and light weight type strong finger chuck for aluminum wheel All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA, B5-9 type A spindles. UNIT : mm SPEC Model Applicable Wheel Size Out Dai. Of Chuck (mm) Available Spindle Nose Max.Pull Force (kgf) Max.Gripping Force (kn) Max.Operating Pressure Mpa (kgf/cm2) Max.Speed (r.p.m.) Weight (Without Jigs) (kg)

High speed and light weight type strong finger chuck for aluminum wheel All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA, B5-9 type A spindles. UNIT : mm SPEC Model Applicable Wheel Size Out Dai. Of Chuck (mm) Available Spindle Nose Max.Pull Force (kgf) Max.Gripping Force (kn) Max.Operating Pressure Mpa (kgf/cm2) Max.Speed (r.p.m.) Weight (Without Jigs) (kg)

3 jaw draw down power chuck For the clampped work-piece is appressed to the surtace, chucks are suitable for heavy machining. Chuck Actutors with cylindrical structure are durable and ensures high clamping repeatability. Accurate self-centering and pull back features are adequate or precise length control machining requirements. UNIT: mm SPEC Model Plunger Stroke (mm) Jaw Stroke (In Dia.) (mm) Max. Pull Force (kgf) Max. Gripping Force (kn) Max. Operating Pressure Mpa (kgf/cm2

3 jaw ball swing lock chuck The chuck can attract the workpiece and hold it on. The jaw operates in two stages : Clamping pull back, so it can hold the workpiece exactly on the position in front of the chuck, and make it under the stabile situation. The chuck can grasp the workpiece on both O.D. and I.D. clamping. The chuck can switch between O.D. and I.D. clamping mode by a simple operation. The chuck can grasp the part of the taper. The chcuk can exactly grasp the black

3 jaw extra high speed through-hole power chuck(adapter inluded) Possible 10,000 r.p.m. highest speed chuck. Model HN chucks are assembled with adaptor for ASA B5.9 type A spindles. Model HN chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. UNIT : mm SPEC Model Through- Hole (mm) Plunger Stroke (mm) Jaw Stroke (In Dia.) (mm) Max. Pull Force (kgf) Max. Gripping Force (kn

Floating plate center chuck Suitable for easy one step cutting of thin hores, plate and outside diameter. UNIT : mm SPEC Model Plunger Stroke (mm) Max.Operating Pressure Mpa (kgf/cm2) Max.Speed (r.p.m.) Weight (kg) Moment Of Inertia I(kg‧m2) Matching Cylinder P165 35 1.0(10) 6000 18.5 0.02 MS125C35

4 jaw through hole power chuck (adapter excluded) All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw. Master jaw : 1.5mm x 60° serration. Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles. UNIT: mm SPEC Model Through-Hole (mm) Plunger Stroke (mm) Jaw stroke (In Dia.) (mm) Max.Pull Force (kn) Max.Gripping Force (kn) Max.Operating Pressure (kgf / cm2) NIT-206

Vertical and vertical horizontal stationary power chuckSuitable for vertical milling and drilling operations.With large through-hole, Vertical / horizontal power chucks does not only clamp the long workpiece but also the horizontal holding. UNIT: mmSPECModelPiston Dia.(mm)Piston Area(cm2 )Push Side /Pull SideMax. DrawBar Force(kgf)Push Side /Pull SidePistonStroke(mm)Max.OperatingPressure(kgf / cm2)Weight(kg)MatchingChuckDV-6Ø115104 / 78.51900 / 1400202012V-206DV-8Ø155187 /

Product Details Brand:NTH Replaceable for Japanese brands. Standard product 6~10" made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding. Equipped with Protected cover on the gauge of chuck face, suitable for vertical lathe. Independently moving master jaws for clamping huge irregular workpiece. Special dust and water proof. Suitable for vertical lathe. Model/size Jaw

Product Details Brand:NTH More large bore: the large bore in wedge type power operated chucks. 20% large bore: approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks. Adapter for A2 spindle(DIN 55026) Easy to mount. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10" made of high

Product Details Brand:NTH Easy to mount, fit for the spindle DIN,BS,ISO,ASA,B5-9 standard. The oil nipple located in the master jaws, serration pitch:1.5mm*60 Suitable for long bore or special workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. Standard product 6" ~10" made of high strength alloy steel SCM440 from Japan,Above 21 inches are made of FCD600. Sliding surfaces, master jaws,

Product Details Brand:NTH Easy to mount. Suitable for long bore or special workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10" made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding Quick replace cover (unit:

Product Details Brand:NTH Gripping accuracy of 0.03mm (0.0012 inch) T.I.R.. Standard accessories chuck wrench, hex. key. and a set of mounting bolts. (UNC-bolts) The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regular material. (unit: mm) Model/size Spindle shape taper A B E H J K L Installing size F1 / F2 / F3 / F4 KA5-8" A1-5 200 77.2 40 81.2 28 42.2 11 82.563 / 14.288 / 3-M10 / 61.9 KA6-8" A1-6 200 77.2 53 81.2 28

Product Details Brand:NTH Adapter for A2 spindle(DIN 55026) Easy to mount. Suitable for long bore or special workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10" made of high strength alloy steel SCM440 from Japan. Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and