Industrial Instruments

Product Overview The Masoneilan 12800 is a direct-acting pneumatic level controller built on the torque-tube displacer platform. It provides proportional or on/off pneumatic output to control valves without any electrical power. It's especially common in high-pressure steam drums and separators where pneumatic reliability is preferred over electronic devices. Features Torque-tube displacer with no process seals Pneumatic proportional control Adjustable gain and reset settings

Endress+Hauser Liquiphant FTL51B Vibronic Point Level Switch Product Overview The Endress+Hauser Liquiphant FTL51B is the latest generation vibronic point level switch designed for reliable and safe liquid level detection in industrial processes. As part of the Proline family, the FTL51B combines high measurement stability , digital connectivity , and diagnostic intelligence , making it ideal for safety-critical applications such as overfill protection and pump dry-run

Bopp & Reuther Electromagnetic Flowmeter Product Overview The Bopp & Reuther Electromagnetic Flowmeter is a reliable, full-bore solution for large-line flow control in municipal and industrial systems. Operating on the electromagnetic principle, it measures conductive liquids with ±0.2% accuracy across DN10 to DN2000 sizes, with no obstruction or pressure loss. The rugged design features a welded steel body, advanced PFA lining, and integrated diagnostics including empty pipe

Endress+Hauser PMC71 Pressure Transmitter 1. Product Overview Platinum versions achieve ±0.025% accuracy with a 100:1 turndown, maintaining stability under 700 bar pressure. The vacuum-resistant ceramic diaphragm (0 mbar abs.) includes breakage detection for system safety. Intelligent Diagnostics & Data Management Compliant with IEC 61508 for SIL3 redundancy, suitable for high-integrity applications. Certifications include ATEX, FM, CSA, marine (GL), and hygienic (3A, EHEDG)

Endress+Hauser Cerabar PMP55 Capillary Version The transmitter for hot processes with remote seals Product Overview The PMP55 with capillary diaphragm seals is for high temperature applications where the transmitter must stay cooler. The capillary keeps the electronics away from heat. It's used in chemical and oil processes with hot media. Key Features Capillary for remote mounting High temperature fill fluids Stable in temperature changes Various seal types Good accuracy

Product Overview The Masoneilan 12800 is a pneumatic level controller that uses the torque-tube displacer principle to measure and control liquid level in process vessels. It combines the proven 12400 transmitter mechanics with a pneumatic controller to provide direct on/off or proportional control without electricity. It's widely used in refineries and chemical plants where pneumatic systems are preferred for safety or simplicity. Features Torque-tube displacer design – no

Krohne OptiSwirl 4200 - Unrivaled Performance in Flow Monitoring ​ The Krohne OptiSwirl 4200 is a cutting - edge vortex flowmeter that offers unparalleled performance in fluid flow measurement. Engineered with precision, it caters to a diverse range of industrial applications. ​ Features ​ Exceptional Accuracy : By utilizing sophisticated vortex - shedding principles, the OptiSwirl 4200 achieves remarkable accuracy in flow rate determination. It can precisely monitor fluid

Krohne WATERFLUX 3070: Revolutionizing Water Flow Monitoring Product Overview The Krohne WATERFLUX 3070 electromagnetic flowmeter revolutionizes water flow measurement, targeting district metering and custody transfer of drinking water. Its flexible power supply, either battery - based for remote operation or mains - powered with battery backup, guarantees uninterrupted measurement. The Modbus communication protocol facilitates easy integration with various systems. ​

Krohne OPTIMASS 6400: An Outstanding Choice for Industrial Measurement ​ Product Introduction ​ The Krohne OPTIMASS 6400 is a high - performance Coriolis mass flow meter designed for complex industrial measurement scenarios. Based on an advanced twin - bent tube structure, it uses cutting - edge measurement technology to accurately measure key parameters such as mass flow, density, and temperature of fluids, providing reliable data support for industrial production. ​

Endress Hauser New Original E + H Proline Prowirl F 200 7F2B 7F2C Vortex Flowmeter Product Specifications Medium Water, Gas, Steam Max. process pressure PN 100, Class 600, 20K Digital communication HART, PROFIBUS PA, FOUNDATION Fieldbus Degree of protection IP66/67 Medium temperature range Standard: -40 to +260 °C (-40 to +500 °F) Connectivity Flange Product Overview The Proline Prowirl F 200 is a state-of-the-art vortex flowmeter from Endress+Hauser, offering accurate and

Product Overview In ammonia storage spheres, LPG bullets and small LNG tanks the FMP54 with coaxial probe is installed everywhere. The coaxial version has no dead zones and measures right to the bottom even with very low dielectric (εr ≥ 1.4). It handles the big temperature swings from filling cold product to warm ambient without losing signal. Many plants have been running the same FMP54 for 15+ years with zero maintenance. What Makes It Special for Low-Temperature Service

Product Overview The Endress+Hauser 5H3B Proline Promag H 300 is a versatile electromagnetic flowmeter for dynamic food and beverage production lines. With PFA lining and one-sided access transmitter, it handles syrups, juices, and dairy products with ±0.5% accuracy. The remote display option and Bluetooth setup via FieldCare app simplify integration in filling machines and mixing vessels. Heartbeat Technology ensures compliance with HACCP and traceability requirements. With

Endress+Hauser Liquiline CM442 / CM444 Multi-Channel Transmitters High-Performance 1/2/4-Channel Water Analysis Controllers for Industrial Applications The Endress+Hauser Liquiline CM442 and CM444 are compact, modular multiparameter transmitters designed for precise and continuous monitoring of water quality in industrial, environmental, and municipal processes. Built on the Liquiline platform, both transmitters use Memosens digital sensor technology, providing exceptional

Endress+Hauser Liquiline CM444 Multi-Channel Controller Advanced Modular Water Analysis Controller for Industrial Applications The Endress+Hauser Liquiline CM444 is a high-performance multi-channel controller designed for continuous monitoring of water quality parameters in industrial and environmental processes. Based on the Liquiline digital platform, it provides flexible measurement, efficient diagnostics, and seamless system integration, making it a trusted solution for

Endress+Hauser Cerabar PMP55 The pressure transmitter with diaphragm seals for sticky, corrosive or hot media Product Overview The PMP55 is the Cerabar pressure transmitter with diaphragm seal. Plants use it when direct contact with the process would damage the sensor – like in viscous, corrosive, or high-temperature fluids. It comes with one seal or two for differential pressure. The piezoresistive sensor gives good accuracy, and it's common in chemical, food, and pharma

Endress+Hauser Proline Promass F 300 Coriolis Mass Flowmeter Product Overview The Proline Promass F 300 is Endress+Hauser’s top-tier Coriolis flowmeter for the most demanding applications. It measures mass flow, volume flow, density and temperature simultaneously with very high accuracy. The built-in Heartbeat Technology allows self-verification and diagnostics without stopping the process — a big reason why many plants choose it for custody transfer, dosing and critical

Endress+Hauser Liquicap FMI51 Level Transmitter Product Overview The Liquicap FMI51 is a capacitance continuous level transmitter with fully insulated rod or rope probe. It is particularly strong in media that tend to stick or coat probes (adhesives, slurries, polymers). The active build-up compensation and gas-tight feedthrough make it reliable for long-term use in tanks and silos. Features PFA/PTFE insulation – resists buildup and corrosion Active build-up compensation

KROHNE OPTISWIRL 4200 Vortex Flowmeter The one vortex meter plants trust when steam is wet or the gas is dirty Why So Many Plants Pick the OPTISWIRL 4200 In real factories steam isn’t perfect dry superheated – it’s often wet, or the pressure drops and it condenses. Normal vortex meters start reading wrong or give alarms. The OPTISWIRL 4200 has a special sensor that measures gross heat and compensates for wetness automatically. It also has built-in temperature and pressure

DET-TRONICS X3301 Multispectrum Infrared Flame Detector Product Overview The X3301 is Det-Tronics’ multispectrum IR flame detector for open-area hydrocarbon fire detection. It uses three infrared bands and advanced algorithms to provide fast, reliable detection while rejecting most false alarm sources. With up to 210 ft detection range, it is a standard choice for large open spaces in oil & gas, refineries and chemical facilities. Technical Specifications Parameter Specificat

Endress+Hauser Proline Promass F 100 / F 200 Coriolis Flow Meter Product Overview The Promass F 100 / F 200 from Endress+Hauser are Coriolis mass flow meters for liquids and gases. F 100 has compact transmitter, F 200 has remote. They measure mass flow, volume flow, density, and temperature with high accuracy, even in changing conditions. The F series is often used in plants where multi-parameter measurement and no pressure drop are important. Features Welded tube design –