Vacuum Valve

Vacuum Valve Technology Throttle Valve SW Threaded Joints At Both Ends 1. Introduction and application Vacuum Valve for applications where some of the suction cups may not always be in contact with the workpiece Vacuum line to a suction cup is opened only if a workpiece is detected by a mechanical sensor May be installed in any orientation 2. Design Threaded joint with cross section at both ends Wide range of apertures for different volumetric flows 3. Advantages Robust

Vacuum Valve Technology Throttle Valve SW Threaded Joints At Both Ends 1. Introduction and application For handling breathable workpieces Reduce the suction cup volume flow without contacting the workpiece and maintain the system vacuum 2. Benefits The vacuum line is opened only if the suction cup is in contact with the workpiece (mechanical sensing); Can also be used for porous workpieces; Can be installed at any position,eg.restricted spaces; 3. Design Threaded joint with

Vacuum Regulating Valve Technology MVRV With Aluminium Alloy Material 1. Introduction and application This product is mainly used in workshops where different vacuum levels are required in a centralized control factory or where the pressure of each suction part needs to be adjusted.The operating low pressure must be lower than the main low pressure. 2.Design The body is made of aluminum alloy P is a vacuum pump interface A is the working port The adjusting screw can adjust

Vacuum Valve Technology Throttle Valve SW Threaded Joints At Both Ends 1. Introduction and application For handling breathable workpieces Reduce the suction cup volume flow without contacting the workpiece and maintain the system vacuum Can be installed at any position. 2. Design Threaded joint with cross section at both ends Wide range of apertures for different volumetric flows 3. Advantages Robust construction and long service life; Automatically reduces the vacuum channel

Vacuum Check Valve SVK With Brass Ball Seat Aluminum Shell Material 1. Introduction and application For applications with multiple suction cups in vacuum systems,it prevents the effects of suction cups that are not in contact with the workpiece or suddenly come off the workpiece. Isolating the suction cup of the not adsorbed workpiece from the vacuum system to maintain the system vacuum； The same gripping system can handle workpieces of different shapes and sizes so that the

Vacuum Valve Technology Diaphragm Check Valve MOW With Aluminium Alloy Material​ 1. Introduction and application The valve is placed at the inlet of the vacuum pump to prevent air backflflow from causing great damage to the pump. 2. Design The body is made of aluminum alloy and light in weight； The diaphragm is made of EPDM,wear resistance and fatigue resistance； 3. Design Data Type Size(MM) G1 G2 H SW1 SW2 MOW G1/4 G1/4"-F G1/4"-F 42 20 20 MOW G3/8 G3/8"-F G3/8"-F 50 24 24

Vacuum Valve Technology 2/3 Way Vacuum Pneumatic Valve Alumina MPV-D-F4-P 1. Introduction and application The valve is controlled by the cylinder internal piston action, thus realizing vacuum opening and closing. It is suitable for occasions requiring quick vacuum switching. 2. Design The body is made of Alumina, (1) is a vacuum pump joint, (2) is the working port, Cylinder (4) controls piston (3)action. 3.Design Data Type length(MM) B D1 D2 H G1 G2 G3 L L1 X1 Y1 MPV-D32-F4-P

Vacuum Valve Technology Direct Acting 2/3 Way Vacuum Solenoid Valve MO 1. Introduction and application The three-way vacuum electromagnetic valve is a two-position direct acting, conical valve core, normally open or normally closed type. This valve is commonly used in vacuum cut-off of feeders, suctiontype stackers, robots, openers, etc. where it is necessary to react quickly between the suction in the line and the intake air, and can also be vacuum connect in the case of