Compact Actuator

15S / 18Nm Miniature Electric Actuator , CE CSA RoHs electric actuator Description DCL-02 series is widely applied in various automatic operation systems, such as: level, flow, pressure control, air-conditioning systems, fire fighting systems, water treatment systems, and applied to equipment, chemical industry and food machineries. It is matched with butterfly valves with diameter less than DN40 and ball valves with diameter less than DN32. It is suitable for many kinds of

IP67 NEMA4/4X Handwheel Operating Compact Actuator CSA Certified Description DCL can add standard handwheel to its electric actuators, both for common type or explosion proof type. To ensure the safety of manual handling, an emergency power off button is also available to avoid mistake operation. The power off button is on the back of actuator and very easy to reach. Sometimes, we can not confirm the actuator is powered or not, we just press the button. Commonly the handwheel

Local/Remote switchable 1/4 Turn 100Nm-2500Nm Compact Actuator with dome indicator Features Quarter turn operation with compact design ISO 5211 multi flange mounting well coupled to soft seal, metal seal, PVC butterfly valve Used for flap valve and ventilation butterfly valve as well, size up to DN1200/48” Self-locking worm gear drive prevents back driving to keep no leak of valve Handle or handwheel for manual operation Visual position indicator for butterfly valve turning

Integral designed modulating type compact actuator / no extra cavity for control box DCL-05E~250E parameters.pdf Features Quarter turn operation with modulating controlled by 4-20mA/1-5V/2-10V input signal Actuator output drive position is proportional to input signal Full potted multi-function smart control pack, world leading anti-interference ability Self-calibrating and problem self-checking function Unique integral motor/control pack/ housing design with very small size

Adjustable dead space type electric compact actuator with basic error ≤ 1% Description DCL modulating type electric actuator uses fully potted resin plastic packaged control pack. For intrusive electric actuators, fully potted control pack is more reliable and safer than the bare control board. If without fully potted package, the electronics on the control board are easily touched by mistaken operation when doing wiring or checking, then increase the failure rate of control

Water treatment used compact electric actuator matched butterfly valve up to DN600 Specification: Actuator Type Standard Time/Torque Optional Time/Torque Turning Angle(Max.range) Total Weight Power Supply Selected Control Circuit DCL-02 15S/18Nm 7S/9Nm 60S/18Nm 0~90°Adjustable 1.2Kg DC24V/AC24V AV110V/AC220V Types of A/B/E/G DCL-05 20S/50Nm 4S/20Nm 10S/30Nm 60S/50Nm 0~360°Adjustable 2.5Kg DC24V/AC24V AV110V/AC220V/AC380V Types of A/B/C/D/E/F/G/H DCL-10 30S/100Nm 15S/50Nm 60S

On off type compact actuator with over 10000 full range life cycles in rated torque Features 1/4 turn operation with self-locking Used for flap valve and ventilation butterfly valve as well, size up to DN1200/48” Hard high pressure die cast aluminum housing with weather proof IP67 and NEMA 4X Heavy duty motor with thermal overload protection/duty rate 80% Over torque protection by torque test function of smart full potted controller Over 10000 times full range life cycle with

Compact actuator with F-class insulation rating motor/ thermostat available Features: Torque from 18Nm to 2500Nm/160in.lbs to 22125 in.lbs Less than 95° operation with adjustable angle and mechanical limits Very compact size for 360° installation, with water proof connector and cable optional Water proof IP67 and NEMA 4X aluminum alloy enclosure with C3 level corrosion resistance On-off type and modulating type with 4-20mA/2-10V input control signal available All metal gear

Motorized compact actuator / tri-state floating point control for damper or temperature Description DCL provides customized design service for some special requirements. All series actuator can set one more required middle position between full open and full close position. Wiring diagram can be designed per customer’s demand. Actuator with middle position is commonly used in applications that need a pre-set intermediate control position, such as T type 3-way ball valve.

On off compact actuator with over 10000 full range life cycles in rated torque Features 1/4 turn operation with self-locking Used for flap valve and ventilation butterfly valve as well, size up to DN1200/48” Hard high pressure die cast aluminum housing with weather proof IP67 and NEMA 4X Heavy duty motor with thermal overload protection/duty rate 80% Over torque protection by torque test function of smart full potted controller Over 10000 times full range life cycle with full

IP67 Water Treatment DN600 Butterfly Valve Actuator Features The smallest size and most compact design in torque range from 18Nm to 2500Nm Double row chain from gear box to worm gear stem ensure torque transfer strength Strong motor equipped to make sure high start torque beyond rated torque in 10% under rated voltage Hard high pressure die cast aluminum housing with watertight IP67 and NEMA 4X Match up to DN650 butterfly valve, DN350 ball valve and DN1200 ventilation

Compact actuator with local emergency power off button/manual override standard Features 1/4 turn operation with mechanical limits Heavy duty motor with thermal overload protection/duty rate 80% Compact size for limit space with weather proof IP67/type 4X aluminum alloy housing Local button to cut off power when emergency issue happens for local/remote control switch Automate ball valve and butterfly valve to adjust or cut off flow Over 10000 times full range life cycle with

Non-ventilated reversible induction type motor equipped compact actuator Description DCL compact electric actuators are most commonly used in HVAC field with butterfly valve. In many building automation systems, electric actuators are widely used to control indoor temperature, air conditioner air volume, water flow, condensate flow and hydraulic balance etc. DCL use heavy duty motor with 80% duty rate that can do more frequently control to make temperature more accuracy. Very

Non-ventilated reversible induction type motor equipped compact actuator Features 1/4 turn operation with mechanical limits Automate ball valve and butterfly valve to adjust or cut off flow All bronze alloy worm sector gear is very durable and resistance to high force friction Over 10000 time full open and close life cycles with full rated load with duty rate 80% Compact size for limit space with weather proof IP67/type 4X aluminum alloy housing Corrosion protection robust

Features Subminiature in Volume(Smaller than a pop Can) Super Torque (18Nm/15S) Super Protection Performance (Full Aluminum alloy Casing) Can choose open display device of adjustable convex type IP68 water-proof cable connector Mannual operation handle Update:The DC12V power supply models DCL-02,DCL-05, DCL-10 and DCL-20 have obtained CSA certification. Description The DCL-02 series electric actuators are engineered for space-constrained valve automation applications,

Explosion proof electric compact actuator with ExdⅡC T4 grade for Zone 1 / Division 1 Features Quarter turn operation with mechanical limits Cylinder stop type connection surfaces of every housing cover, flame proof gap and length complied to UL and CSA standard Explosion proof grade ExdIICT4 for Zone system and Group C, D T4 for Division system Rugged IP68/NEMA 4X aluminum alloy housing with powder coating 10mm high strength glass lens for valve position indicator, keep

CSA AC24V 90° 15S/18Nm Ultra Small Electric Actuator Description The DCL-02 Series quarter-turn electric actuator is engineered for seamless integration into diverse automated control systems—including HVAC, fire protection, water treatment, and precision regulation loops for level, flow, and pressure—while its robust design also makes it an ideal choice for the chemical processing and food machinery industries. Specifically optimized for small-bore automation, the DCL-02 is

Description The DCL-02 series electric actuators are professionally developed for easy integration into various automatic control systems, widely applied in HVAC, fire safety, water treatment, as well as liquid level, flow and pressure precision regulation. They are also well-suited for chemical and food processing equipment. Optimized specifically for small-caliber valve automation, this series perfectly matches butterfly valves up to DN40 and ball valves up to DN32.

Non-ventilated reversible induction type motor equipped compact actuator Features 1/4 turn operation with mechanical limits Automate ball valve and butterfly valve to adjust or cut off flow All bronze alloy worm sector gear is very durable and resistance to high force friction Over 10000 time full open and close life cycles with full rated load with duty rate 80% Compact size for limit space with weather proof IP67/type 4X aluminum alloy housing Corrosion protection robust

Non-ventilated reversible induction type motor equipped compact actuator Features 1/4 turn operation with mechanical limits Automate ball valve and butterfly valve to adjust or cut off flow All bronze alloy worm sector gear is very durable and resistance to high force friction Over 10000 time full open and close life cycles with full rated load with duty rate 80% Compact size for limit space with weather proof IP67/type 4X aluminum alloy housing Corrosion protection robust