Ultrasonic Calibration Block

ASTME2491-2013 test block Phased Array Test Block Type A Specifications: ASTME2491-2013 Calibration Functions: The Phased Array “Type A” Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. It can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG for thickness up to 50 mm, and crack sizing.

ASME 38mm Basic Ultrasonic test block Carbon Steel block INCLUDED MAKER CERTIFICATION AND ABS PLASTIC CASE MATERIAL :Carbon Steel Package including 1 calibration block 1 certificate 1 block case ​ Our Service 1. Our company's product can be repaired free of charge within two year. Also the produc's whole life's repair. 2. If the product is demand within the guarantee period (except non-repair accessories), please send the product back for repair by right of guarantee card. If

ASTM Area/ Amplitude (Set of 8) Specifications: ASTM E127-2015 or ASTM E428-2008 Calibration Functions: Determining relationship comparisons of flaw size and echo amplitude. Set of eight flat-bottom hole blocks used to determine the relationship between flaw size and echo amplitude by comparing signal responses. Metal travel distance is 3.000” for all blocks, and FBH diameter ranges from #1 (1/64") to #8 (8/64"). In accordance with ASTM E428. Includes our NIST traceable

ASTM E164-2013 DC Distance Calibration Block Specifications: ASTM E164-2013 Calibration Function: Straight Beam: distance, amplitude. Angle Beam: index point, distance. *We can provide DC calibration block based on ASTM E164, AWSD1.1/D1.1M

Our Service 1. Our company's product can be repaired free of charge within two year. Also the produc's whole life's repair. 2. If the product is demand within the guarantee period (except non-repair accessories), please send the product back for repair by right of guarantee card. If the product damage date is overdue, our company will charge for repair. 3. If the product has been subject to abuse, accident, alteration, modification, tampering, neligence, misuse, or has been

V2 Test Block Calibration Block No.2 Specifications: ISO7963:2010 Calibration Function: Small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain, engraved reference mark scales from 35 to 75 degrees. *We can provide V2 calibration block based on BS2704 and ISO 7963. 1018 STEEL type: 20mm/25mm INCLUDED MAKER CERTIFICATION AND ABS PLASTIC CASE MATERIAL AVAILABLE FOR ALUMINUM: 25mm/ STANLESS STEEL: 20mm/25mm

NDT IIW-Type 1 AWSD1.1/D1.1M-2015 Calibration Block 1018 steel test block for Ultrasonic Flaw Detector Material: 1018 Steel Weight:6 KG Package Including: 1 unit calibration block 1 suitcase 1 certification The drawing of the block:

Calibration Block No.3 (V3) V3 Metric Calibration Block 1018 Steel for Ultrasonic Flaw Detection NDT Specification For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Includes 25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm

Standard thickness block in full line Nominal value 1.0mm 1.2mm 1.5mm 2.0mm 3.3mm 5.5mm allowable deviation a ±0.01 Nominal value 7.7mm 10mm 15mm 20mm 25mm 50mm allowable deviation a ±0.01 ±0.02 Nominal value 75mm 100mm 150mm 200mm allowable deviation a ±0.02 ±0.05 Total:16 pcs 1 set

5 step UT test block 1018 steel nickel plated 0.1, 0.2, 0.3, 0.4,.05 Inch per ASTM E797 material: 1018 steel nickel plated thickness:0.1, 0.2, 0.3, 0.4,0.5 Inch pad size: 0.75X.75 inch standard:per ASTM E797 Package including 1 unit Calibration Test Block 1 certification 1 suitcase

ASME Non-piping Cal Block T=1" Material :1018 steel Package including 1 calibration block 1 certificate 1 block case Our Service 1. Our company's product can be repaired free of charge within two year. Also the produc's whole life's repair. 2. If the product is demand within the guarantee period (except non-repair accessories), please send the product back for repair by right of guarantee card. If the product damage date is overdue, our company will charge for repair. 3. If

ASME Non-piping Cal Block T=0.5" Material :1018 steel Package including 1 calibration block 1 certificate 1 block case Our Service 1. Our company's product can be repaired free of charge within two year. Also the produc's whole life's repair. 2. If the product is demand within the guarantee period (except non-repair accessories), please send the product back for repair by right of guarantee card. If the product damage date is overdue, our company will charge for repair. 3. If

Gage Block Set 38 Pcs Grade 0 Slip Jo blocks 1-100mm Certificated Multi-size Specification Materials Steel Hardness 800HV The coefficient of thermal expansion ( 10-6/℃) 11.5±1 Density (g/cm3) 7.8 Flexural strength (MPa) 2000 Modulus of elasticity (104Kgf/mm2) 2.1 Poisson ratio 0.3 Thermal conductivity (cal/cm.sec. C) 0.13 Grade 0 Package including 1 Block : 1mm 1 Block: 1.005mm 9 blocks: 1.01-1.09mm 0.01 steps 9 Blocks: 1.1-1.9mm 0.1Steps 8 Blocks:2-9mm 1 steps 10 Blocks: 10

Standard thickness block in full line Nominal value 1.0mm 1.2mm 1.5mm 2.0mm 3.3mm 5.5mm allowable deviation a ±0.01 Nominal value 7.7mm 10mm 15mm 20mm 25mm 50mm allowable deviation a ±0.01 ±0.02 Nominal value 75mm 100mm 150mm 200mm allowable deviation a ±0.02 ±0.05 Total:16 pcs 1 set R&D TMTeck has perfect production technology, consummate testing ways and strong R&D capability. From NDT portable instrument to large automatic detection system, TMTeck owns intellectual

Standard UT Kit - Flawed Specimens 10 Specimens:8 Plates, 1 Pipe and 1 Tee 20 Randomly Placed Discontinuities (Flaws) • Material: Carbon Steel • Kit Spec: 10 Specimens (4) Plates @ 10X100X200mm(weld length:100mm) (4) Plates @ 16X100X200mm(weld length:100mm) (1) Tee @ 10X100X200X100mm(weld length:100mm) (1) Pipe @ Φ106X12X200mm • Flaws: 2 each specimen, 20 total

8 Step test block Wedge Testing Ultrasonic Test Block copper Ultrasonic thickness gauge Model PIC Description 8 Step Test Block S-8-MM MM,copper, 8step test block Thickness:1mm/2mm/3mm/4mm/5mm/6mm/7mm/8mm size:160*20mm

5 Step test block Wedge Testing Ultrasonic Test Block 1018 steel/304 stainless steel/Aluminum Ultrasonic thickness gauge Thickness:2.5-5-7.5-10-12.5mm Width:100mm Package including 1 unit Calibration Test Block 1 certification 1 suitcase

Standard RT Kit - Flawed Specimens 10 Specimens:8 Plates, 1 Pipe and 1 Tee 20 Randomly Placed Discontinuities (Flaws) • Material: Carbon Steel • Kit Spec: 10 Specimens (4) Plates @ 10X100X200mm(weld length:100mm) (4) Plates @ 16X100X200mm(weld length:100mm) (1) Tee @ 10X100X200X100mm(weld length:100mm) (1) Pipe @ Φ100mm Thickness:10mm • Flaws: 2 each specimen, 20 total Our Service 1. Our company's product can be repaired free of charge within two year. Also the produc's whole

NDT IIW-Type 1 AWSD1.1/D1.1M-2015 Calibration Block 1018 steel test block for Ultrasonic Flaw Detector Material: 1018 Steel Weight:6 KG Package Including: 1 unit calibration block 1 suitcase 1 certification The drawing of the block:

About the item Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, U.S. Customary Block. Metric version Dimensions: 25.0 mm x 100.0 mm x 300.0 mm Features: 100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm