Stenter Finishing Machine

Power - saving Stenter Finishing Machine , Humanized design , Inverter controlled​ 1. Description: Stenters are the heart of textile finishing. A stenter is a machine or apparatus for stretching or stentering fabrics. The purpose of the stenter machine is to bringing the length and width to pre determine dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted. 2. Some advantages: 1) Overfeed is frequently

Friendly HMI operation Stenter Finishing Machine , with convey belt , Even temperature 1. Machine applications: This machine is applicable to extending and heat setting of fabrics, such as pure cotton which gram per square meter is 50-400, polyester cotton and other blended fabrics. Equipped with mangle, it can also carry out other treatments like squeezing and resin padding.The machine is suitable for heat setting of fabric, Chemical Finishing especially on woven fabrics. 2.

Friendly HMI opeation Stenter finishing Machine , Even temperature , Multi-functional 1. Product uses This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2. 2. Main technical index Form: heated air circulation, single layer horizontal type Vehicle category: left / right hand Nominal width: 1600-3800mm Amplitude modulation range(mm): 700-(Nominal width-200 mm) Speed range: 5

Heat set Stenter finishing Machine , Even temperature , Multi-functional 1. Product Description Stenter machine can be widely used in woven fabrics, knitted fabrics and other textile finishing equipment, a wide range of functions, stability and reproducibility, simple operation, convenient maintenance, energy saving, high degree of automation. 2. Technical parameters: Origin China Main Matching Fabric open width fabric (70~350g/m²) made of cotton, cotton/polyester,wool

High quality insulation Stenter Finishing Machine , PLC & Inverter controlled​ 1. Stenter Uses: The stenter is a continous types of machine and can be used before or after dyeing and printing. The stenter frame can be used for the following processes: 1) Equlizing (skew and bow control); 2) Printed design control; 3) Fabric width setting, 4) Drying, 5) Application of finishing chemicals The process stages: Pretreatment-- Stenter (Equalizing) --- Dyeing/Printing---Stenter

Coating stenter finishing machine , 4 m each chamber , custom-tailer 1. Technical specifications: Normal machine width: 1400-3600mm Fabric working width: 1200-3400mm Chamber heating source: nature gas/ oil/ electricity/steam Width adjustment range: 500-3400mm Chambers No. As required Temperature of chamber: 100-220℃ Fabric held by: clip/pin/combined Air pressure: above 0.5mpa Coating type blade coating or foam coating Installed power: Approx 140Kw 2. The stenter Features: