Armoured Electrical Cable

15KV One Phase Armoured Electrical Cable , High Voltage Underground Cable This product is applicable to the power transmission and distribution line with AC rated voltage(U0/U) of 3.6/6kV-26/36kV system.It is routed in air (cable bridge frame,indoor wall support,and tray) and soil(direct buried, cable trench,pipe ect.) respectively according to difference of the protection layer structure. Construction 1 ..... stranded bare copper 2 ..... inner layer of semi-conducting

Black Copper Conducor Armoured Electrical Cable With Steel Tape Armoued Applications: Used for power transmission and distribution line with voltage rated at 35kV and below.Compared with PVC Insulated Power Cable, xlpe power cable boasts not only characteristics of excellent electricity, mechanism, heat and aging-resistant, environment stress-resistant and chemical corrosion-resistant, but also simple structure, light weight, no restriction by laying drop, and high temperatur

Low Voltage Single Cores Steel Wire Armored Electrical Cable IEC 60502-2 Standard Applications STA Armored Electric Cable YJV22 4 Core Cable applies to electrical power transmission and distribution lines with AC rated voltage Uo/ U up to and including 0.6/1kV. For outdoor and indoor installation in damp and wet locations,laid directly in the ground where excessive mechanical stresses are present in sloping and moving terrains and in vertical or inclined laying,as well as in

CU/XLPE/STA/PVC Steel Tape Armour Power Cable Cu conductor XLPE Insulation Standards IEC60502, BS6346, VDE, AS/NZS, UL,etc or as customer's request. Rated Voltage(kV): 1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35 2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 - 26/35 Number of cores: 1, 2, 3, 3+1, 3+2, 3+3, 4, 4+1, 4+2, 5 and so on. Construction Conductor : Solid or stranded Copper conductor, Cl.1 or Cl.2 as per IEC 60228 Insulation : XLPE(cross-linked polyethylene)

5 Cores CU/XLPE/STA/PVC Power Cable Steel Tape Armoured Electrical Cable 0.6/1kV Constructions Conductor: Plain circular stranded copper conductor, conforms to IEC 60228 class 2 Insulation: PVC/A, XLPE Inner Covering: PVC Armoring: Steel Wire, Steel Tape, Aluminum Wire at request Sheath: PVC/ST2 to IEC 60502, black Note: Insulation color as per standards or at request Applications Used as power distribution and transmission line at rated voltage 0.6/1kV. Suitable for burying

Phase 1 SWA Armoured Electrical Cable LV Underground Power Cable 0.6/1kV Construction Cu/XLPE/STA/PVC Armoured Electrical Cable Voltage Rating 0.6/1kV Conductor Single core: Copper (Cu) (Class 2), Aluminium (Al) (Class 1) Insulation Cross-linked polyethylene (XLPE) Bedding Polyvinyl Chloride (PVC) Armour AWA Sheath PVC Application Used for power transmission and distribution line with voltage rated at 0.6/1kV . Single core cable 2 core cable 3 core cable 4 core cable 5 core

Class 2 Stranded Copper Conductor with STA Used for Underground Reticulation Construction PRODUCT SPECS Conductor: Annealed Copper Circular Compact – Class 2 Insulation: LV-XLPE Phase Color: Numbering Armoring: AWA – SWA – DSTA – GDSTA Specification: SANS 1339 Voltage Ranges: 3.8/6.6kV – 6.35/11kV – 12.7/22kV – 19/33kV Types: Belted or Screened Application: Used for underground reticulation, main distribution systems, sub-station and mining. Can be manufactured with

XLPE Insulated PVC Sheathed STA Cable Three Core and Earth Copper Armoured Electrical Cable 0.6/1kVIt is suitable to be installed in the power line with rated voltage from (U0/U)0.6/1kV to 19/33kV for power transmission. SpecificationsRated voltage, No. of core and range of sectional areaRate Voltage(kv):0.6/1kV 1.8/3kV 3.6/6kV 6/10kV 8.7/15kV 12/20kV 18/30kV 21/35kVEquivalent to : 0.6/1kV 1.9/3.3kV 3.8/6.6kV 6.35/11kV 8.7/15kV 12.7/22kV 19/33kV 21/35kVNo. of core and

3 Cores XLPE Insulation Medium Voltage Al Cable Aluminum Conductor Double Steel Tape Armour Electrical Cable Code name YJ: XLPE insulation V: PVC sheath 32:Steel wire armoring—3 cores 72: Aluminum wire armoring—1 core ZR: Flame resistant MV(6 to 35kv) Power Cable Model and Description Uo/U(Um)=3.6/6(7.2), 6/6(7.2), 6/10(12), 8.7/10(12), 8.7/15(17.5), 12/20(24), 18/30(36), 21/35(40.5), 26/35(40.5)kV No.of Core Conductor cross-section area(mm2) xlpe insulation 1 core 3 core 10

4 Cores CU XLPE STA PVC Power Cable Double Steel Tape Armoured 4x50 mm2 - 4x500 sqmm Cable 0.6 / 1kV Applications STA Armored Electric Cable YJV22 4 Core Cable applies to electrical power transmission and distribution lines with AC rated voltage Uo/ U up to and including 0.6/1kV. For outdoor and indoor installation in damp and wet locations,laid directly in the ground where excessive mechanical stresses are present in sloping and moving terrains and in vertical or inclined

Copper Core Steel Tape Armoured LV Cable XLPE PVC Insulation Underground STA Cable 0.6/1kV Cable details 1.U0/U: 0.6/1kV 2.Standard: IEC60502, BS7870, GB/T12706 3.Max. working temperature: 90 °C , can be 110 °C as requirement 4.Conductor: Class 1/2 annealed bare copper/aluminum solid or strands 5.Insulation: XLPE/PVC 6.Armored: STA 7.Sheath: PVC 8. Cross section area: 1.5~630mm2 9. Cores: 1~5 cores,3C+1E,4C+1E,3C+2E 10. Packing:Wooden drum or as requirement 11.Certification :

Low Voltage Copper Conductor Steel Tape Armoured Cable XLPE/PVC Insulation PVC Sheath Underground Cable Specifications Type Desciption Rated Voltage NO. of Cores Nomibal section(mm2) Applications YJV YJLV Cu or Al conductor,XLPE insulated.PVC sheathed electric cable 0.6/1KV 1,2,3,4 1.5 to 400 For laying indoors and outdoors.The LV XLPE insulated power cable is used in transmission and distribution system at rated voltagae U(Um) ≤10KV.The HV XLPE insulated power cable refers

PVC Out Sheath Steel Wire Armour Power Cable With Copper Conductor Rated Voltage(kV): 18/30kV Number of cores: 1 Construction Conductor: Plain annealed stranded compacted circular copper or aluminium conductor to IEC60228 class 2 Conductor Screen:Extruded semi-conductive compound Insulation:XLPE (cross-linked polyethylene) rated at 90°C Insulaton Screen:Extruded semi-conductive compound Metallic Screen:copper tape or a concentric layer of copper wires Colour for core

Low Voltage Steel Tape Armour Power Cable Cu conductor PVC Out Sheath Standards IEC60502, BS6346, VDE, AS/NZS, UL,etc or as customer's request. Rated Voltage(kV): 0.6/1 Number of cores: 1, 2, 3, 3+1, 3+2, 3+3, 4, 4+1, 4+2, 5 and so on. Construction Conductor : Solid or stranded Copper conductor, Cl.1 or Cl.2 as per IEC 60228 Insulation : XLPE(cross-linked polyethylene) rated at 90 OC Inner covering : PVC Armoring : Steel tape Sheath : PVC type ST2 to IEC 60502, black Model &

Copper Conductor Steel Tape Armoured Electrical Cable With Black PVC Sheath Construction Conductor : Solid or stranded Copper conductor, Cl.1 or Cl.2 as per IEC 60228Insulation : XLPE(cross-linked polyethylene) rated at 90 OCInner covering : PVCArmoring : Steel tapeSheath : PVC type ST2 to IEC 60502, black Application:It is used to transmit and distribute power on the power line of AC rated volage 0.6/1KV or less Using Condition:1.Long-term max. temperature is no more than 70

Copper Wire Shield STA Armoured Electrical Cable , Aluminum Conductor Cable Technical data - Power cable according to DIN VDE 0276 part 603, HD 620, IEC 60502, BS 6622 - Temperature range max. to +90 °C - Temperature during installation from 0 °C to +70 °C - Short circuit temperature +250 °C (up to 5 seconds) - Nominal voltage Uo/U 3,6/6 kV, 6/10 kV, 6,35/11 kV (dle BS), 18/30 kV, 19/33 kV (dle BS) - Operating voltages 3,6/6 kV = max. 7,2 kV 6/10 kV = max. 12 kV 18/30 kV =

Professional SQMM Steel Tape Armoured Cable 3 Core Customized YJLV22 3x300​ Construction AL/XLPE/STA/PVC Armoured Electrical Cable - Round bare aluminum core stranded according to IEC 60228 - Inner semi-conductive layer - Core insulation XLPE - Color code according to HD 308 S2 - Outer semi-conductive layer - Semi-conductive tape - Copper tape screen - Filler - PVC inner sheath - Galvanized steel tape armour (STA) - PVC outer sheath (red or black) Code name: YJ: XLPE

YJV22-6/10KV-3 120 XLPE Armoured Cable With Circular Stranded Copper Conductor Description: CU/XLPE/STA/PVC, IEC 60502 IEC 60502, IEC 60228, GB/T 12706.1-2008. CE, CCC, KEMA Constructions Conductor: Circular stranded copper conductor, conforms to IEC 60228 class 2 Insulation: XLPE/A Inner Covering: PVC Armour: Galvanized Steel Wire or tape Sheath: PVC type ST2 to IEC 60502, black Note: Insulation color as per standards or customer requirement Applications Used for Power

35KV 3 Phase Armored Electrical Cable , Steel Armoured Cable Underground MV(6 to 35kv) Power Cable Details YJ: XLPE insulation V: PVC sheath 32:Steel wire armoring—3 cores 22:Steel tape armoring—3 cores 72: Aluminum wire armoring—1 core 62: Stainless steel tape armoring—1 core ZR: Flame resistant MV(11kv 15kv 33kv) Power Cable Model and Description Uo/U(Um)=3.6/6(7.2), 6/6(7.2), 6/10(12), 8.7/10(12), 8.7/15(17.5), 12/20(24), 18/30(36), 21/35(40.5), 26/35(40.5)kV No.of Core

PVC Sheathed Armoured Power Cable High Tension For Switching Blocks / Industrial Plants This product is applicable to the power transmission and distribution line with AC rated voltage(U0/U) of 3.6/6kV-26/36kV system.It is routed in air (cable bridge frame,indoor wall support,and tray) and soil(direct buried, cable trench,pipe ect.) respectively according to difference of the protection layer structure. High Tension Armoured Power Cable Power Cable Details YJ: XLPE insulation