Paper Machine Parts

High molecular polyethylene(HDPE)faceboard made for the vacuum suction box / forming board After the slurry is formed on the net and preliminary dewatering, its dryness and tightness gradually increase, and the resistance to dehydration increases. To continue dewatering on the net, a method of high pressure difference must be used. The vacuum box is a device that uses the higher pressure difference inside and outside the box to enhance dehydration. The wet paper sheet has a

The high quality pneumatic adjustor for the paper machine wire and felt Type:pneumatic Swing angle: ±5° Main structure: pneumatic tire, swing bearing seat, machine base, moving guide rail, transmission side bearing Auxiliary configuration: signal generating device, control box Material: Signal baffle 1Cr18Ni9Ti signal adjustment mechanism The front of the baffle is inlaid with ceramic.

The stainless steel roll wheel felt sensor for the low speed paper machine Technical Parameters: Stand size: 600mm x 500mm Material: The valve body is made of national standard tin bronze, the valve core is 304 stainless steel, the bracket is stainless steel, and the bottom plate is carbon steel. Applicable air pressure 2.5Mpa One set contains: 1 valve body; 1 vertical stand; 1 horizontal bracket; 1 ceramic baffle; 1 counterweight Wire &felt rectifier also called rectifier,

The tin bronze valve body paper making felt sensor to correct the running direction Technical Parameters: Stand size: 600mm x 500mm Material: The valve body is made of national standard tin bronze, the valve core is 304 stainless steel, the bracket is stainless steel, and the bottom plate is carbon steel. Applicable air pressure 2.5Mpa One set contains: 1 valve body; 1 vertical stand; 1 horizontal bracket; 1 ceramic baffle; 1 counterweight Wire &felt rectifier also called

The different size graphite sealing pad inside the rotary joint on the dryers QS-GF type rotary joint (65-100) Scope of application: Maximum speed: ≤100RPM Maximum temperature: ≤220 ℃ Maximum pressure: ≤1.8MPa Applicable medium: saturated steam, superheated steam, superheated water

The stainless steel metal hose matched with the rotary joint for the dryer QS-GF type rotary joint (65-100) Scope of application: Maximum speed: ≤100RPM Maximum temperature: ≤220 ℃ Maximum pressure: ≤1.8MPa Applicable medium: saturated steam, superheated steam, superheated water

The air spring used in the paper making machine press part / size press / calender The air springs consist of a flexible elastomer rubber body with nylon fabric reinforcement, and rustproof plates with an air inlet and mounting blind nuts. The rubber bellows can be used both as vibration isolators and rubber actuators. The air springs absorb up to 99% of the unwanted vibrations avoiding further damages to the machines and metallic structures. At the same time, they reduce

The common high water pressure lined ruby needle nozzle for the paper machine parts washing Nozzles play an extremely important role in the papermaking process. From the headbox, wire pressing section, drying section, and winding section, nozzles are everywhere. The effect of the use of the nozzle directly affects the quality of the paper, so although the nozzle is small, it is an important part that paper mills cannot ignore. The nozzle is mainly used in the cleaning process

The stainless steel trimming squirt used in the fourdrinier paper machine wire forming part Nozzles play an extremely important role in the papermaking process. From the headbox, wire pressing section, drying section, and winding section, nozzles are everywhere. The effect of the use of the nozzle directly affects the quality of the paper, so although the nozzle is small, it is an important part that paper mills cannot ignore. The nozzle is mainly used in the cleaning process

The common use stainless steel sector nozzle for the movable water sprayer Nozzles play an extremely important role in the papermaking process. From the headbox, wire pressing section, drying section, and winding section, nozzles are everywhere. The effect of the use of the nozzle directly affects the quality of the paper, so although the nozzle is small, it is an important part that paper mills cannot ignore. The nozzle is mainly used in the cleaning process in the

The customized ceramic faceboard for the dewatering components on the paper forming part Product Details Alumina, zirconia, silicon nitride all ceramic dehydration elements 95 alumina 99 alumina Yttrium stabilized zirconia Silicon nitride Zirconia toughened ceramics 1 Main ingredients 95AL2O3 99.8AL2O3 95ZrO2 99Si3N4 80AL2O3+20 ZrO2 2 Density g/cm3 3.5 3.9 6.0 3.24 4.0 3 Acid resistance mg/cm2 3.0 3.0 2.0 2.0 3.0 4 Alkali resistance mg/cm2 0.1 0.1 0.08 0.2 0.1 5 Compressive

The customized felt sensor tin bronze / stainless steel valve body Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a device that uses a rotating object to change the angle of its surface after the tilt angle is changed. It consists of pressure guiding tube, distributor orifice, air bag, adjusting rod,

The JBF type single / double / triple crimping rubber air bag used in the paper making machine

The stainless steel felt sonsor supporter for the felt deviation Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a device that uses a rotating object to change the angle of its surface after the tilt angle is changed. It consists of pressure guiding tube, distributor orifice, air bag, adjusting rod,

The low vacuum / high vacuum suction box used in the paper forming part After the slurry is formed on the net and preliminary dewatering, its dryness and tightness gradually increase, and the resistance to dehydration increases. To continue dewatering on the net, a method of high pressure difference must be used. The vacuum box is a device that uses the higher pressure difference inside and outside the box to enhance dehydration. The wet paper sheet has a dryness of about 2-3

The stainless steel body ceramic faceboard foil box used for the dewatering The foil box consists of face board and frame, and is divided into single-page, double-page and multi-page foil boxes. 1. face board: Long strip board with rake angle, horizontal support surface and backward inclination angle. The bottom is made into various tongue and groove shapes to match the connection bracket. The face board requires a low coefficient of friction and is wear-resistant. Commonly

The paper machine electric tightener to correct the wire and felt Structure: mainly composed of motor, worm gear reducer, bevel gear box, guide screw, flexible, bearing seat, transmission block, shaft, roller, sensor etc. The electric tensioner uses the motor to directly drive the worm gear to transmit the screw rods on both sides to rotate through the bevel gear on the transmission shaft. It is flexibly installed on the screw rod and is sleeved together with the bearing seat

The GF type single / double / triple convolution bellows rubber air spring for the paper machine Features: Abrasion resistance High strength Durable Operating pressure 0 - 8 bar Steel, stainless steel or aluminium connection plate option Working temperature range -40ºC to +50ºC up to 70°C intermittent use High temperature ECO rubber version up to +130°C Medium compressed air oiled/oilfree Lateral misaligment up to 10mm maximum Tilt capability up to 20º maximum Return force

The customized air bag pneumatic control wire and felt corrector Type pneumatic Swing angle ±5° Main structure: pneumatic tire, swing bearing seat, machine base, moving guide rail, transmission side bearing Auxiliary configuration: signal generating device, control box Material Signal baffle 1Cr18Ni9Ti signal adjustment mechanism The front of the baffle is inlaid with ceramic.

Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. Technical Parameters: Stand size 600mm x 500mm Material: The valve body is made of national standard tin bronze, the valve core is 304 stainless steel, the bracket is stainless steel, and the bottom plate is carbon steel. Applicable air pressure 2.5Mpa One set