Patch Cord And Pigtail

Label package, cable tie for one 10-meter AISG/jumper cable Label Specifications Parameters Specification Cable type Jumper or cable AISG jumper, AISG quantity 1 For position number 2 Material Reflective paper for labels Water-resistant lamination Glossy lamination Finishing type of the label Half-cut Packaging configuration Packaging in zip bags Quantity and content of labels in one label pack One label set contains multiple label units. Each unit is printed with one of the

Foam rubber and PVC tape kit for DB9/DB15 connector end of AISG cable Foam rubber Specifications Parameters Specification Cable type AISG db9 or db15 Connector Quantity 1 Dimension (Length x Width x Depth) (mm) Foam rubber: 600 x 63.5 x 3.175 Material Vinyl rubber Dielectric Breakdown (kv/mm) ≥ 22 Insulation Resistance (MΩ) > 1 Dissipation Factor (%) 1 Elongation (%) ≥1000 Operating Temperature (°C) -55~ 80 Water Absorption (%) ≤ 0.05 Environmental Standard RoHS 2002/95/EC

Cold shrink tube kit for one 8-pin connector end of AISG cable Specifications Parameters Specification Use for AISG Cable Connector type AISG 8 pin Connector Quantity 1 Weatherproofing Material Silicon IP Protection Class IPX7 or IPX8 Tensile Strength (Mpa) ≥ 10.3 Elongation (%) ≥990 Tear Strength (N/mm) ≥ 41.6 Brittleness Temperature (°C) < -40 Di-electric Strength (kV/mm) ≥ 23 UL94/Flammability (UL94) V0/V1/V2 Puller/Tube Diameter (mm) 25 Tube Length (mm) ≥152 Cable Range

Product Description: The connectors are designed to have an insertion loss of AVG≤0.3 MAX≤0.5, ensuring that the signal loss is minimized during transmission. Additionally, the connectors have a high return loss of ≥50 (UPC) and ≥60 (APC) which ensures that there is minimal reflection of the signal. Our connectors are built to last, with a durability of 500 times plugging, guaranteeing that they will last a long time and provide a stable connection every time. The connectors

Flat and Round Drop Cable Pigtail With Hardened SC/APC (OptiTap) Connector OptiTap Cable Assembly is factory -terminated, environmentally sealed and hardened connector to reduce the cost and the time of drop cable deployment in optical access networks. OptiTap connector assemblies provide a robust and sealed connection solution for FTTX connectivity. The hardened connector end incorporates an SC/APC type connection within a slim, sealed, threaded polymer housing allowing easy

12~432F Fiber Optic Pigtail Fanout Fiber optic pigtails provide a fast way to make communication devices in the field. They are designed, manufactured and tested according to protocol and performance dictated by the industrial standards, which will meet your most stringent mechanical and performance specifications. Features Low insertion loss High return loss Good repeatability High temperature stability Cable Profile View Cable Parameters Items Specifications Fiber Count 24

FIBER OPTIC PATCH CORD SIMPLEX AND DUPLEX NORMAL TYPE Features Low insertion loss High return loss Good repeatability High temperature stability Optical Cable Drawing Patch Cord Specification Parameters Specifications Fiber Type SM (G652D, G657A) or MM (OM1~OM5) Insertion Loss (dB) ≤ 0.3 Return Loss (dB) ≥ 50 (UPC), ≥ 60(APC), ≥ 30 (MM) Connector Type SC/FC/LC/ST/E2000 or customized Fiber Cores Simplex or Duplex Outer Dimension 2mm or 3mm Material of Outer Jacket PVC, LSZH or

12~432F Fiber Optic Pigtail FanoutA fiber optic pigtail fanout refers to a cable assembly that splits out or fans out multiple individual fiber optic pigtails from a single cable. The number range you mentioned, 12~432F, indicates the potential fiber count or the number of individual fibers in the pigtail fanout assembly.FeaturesLow insertion lossHigh return lossGood repeatabilityHigh temperature stability Cable Profile View Cable Parameters ItemsSpecificationsFiber Count24

2~48F Fiber Optic Pigtail Bundle Pigtail bundles are commonly used in applications where multiple fibers need to be terminated or connected to other optical components or equipment. The individual pigtails within the bundle typically have connectors attached to one end, allowing for easy connection to other devices such as patch panels, switches, or transceivers. Indoor Bundle Fiber Optic Cable Construction Features Excellent stripping performance of tight buffer fiber Aramid

Fiber Optic Pigtail Simplex Fiber optic pigtails provide a fast way to make communication devices in the field. They are designed, manufactured and tested according to protocol and performance dictated by the industrial standards, which will meet your most stringent mechanical and performance specifications.By adhering to industrial standards and specifications, fiber optic pigtails provide a reliable and efficient solution for making connections in the field. They enable

Breakout Cable Patch cord Dawnergy’s indoor breakout fiber optic cables use φ2.0mm simplex cable (φ900um tight buffer, polyester yarns as strength member) as subunits. The subunits are stranded around a FRP central strength member. The cables are completed with a PVC jacket. Cable Construction Features Good tensile strength ensured by stranded FRP strength member structure Application Indoor cable distribution Backbone cable distribution in a building Number Tube for Breakout

MPO patch cord MPO LC FAN-OUT MPO trunk harness Fiber optic MPO Cable Assemblies Dawnergy MPO-LC fan-out is designed for rapid deployment of multi-port patch field connectivity in high-density storage area network (SAN) and data center LAN applications, ensuring efficient use of horizontal and vertical rack pathways through the use of small form cableFeatures:Lower insertion loss and high-return lossBetter durabilityExcellent dust-proofRuggedized round cable, oval cable and 0

FIBER OPTIC PATCH CORD SIMPLEX AND DUPLEX NORMAL TYPE Dawnergy’s fiber optic patch cords are available in either single mode or multi-mode for various applications such as long-haul telecommunication networks, short-link systems and equipment-to-equipment data links. Features Low insertion loss High return loss Good repeatability High temperature stability Optical Cable Drawing Patch Cord Specification Parameters Specifications Fiber Type SM (G652D, G657A) or MM (OM1~OM5)

FTTH drop cable patchcord Dawnergy's FTTH drop cable patchcord construction is that the optical fiber unit is positioned in the center. Two parallel FRP or steel strength members are placed at the two sides. A steel wire as the additional strength member is also applied. The cable is completed with a black LSZH sheath. Features Good crush resistance ensured by parallel strength member Good tensile strength ensured by steel wire Low smoke, zero halogen (LSZH) sheath Simple

FTTA outdoor remote cable patchcord Dawnergy’s FTTA outdoor remote cable patchcord using 2 or 4-cores outdoor remote cable, with conventional LC.FC.SC.ST connector, and outdoor waterproof connector such as ODVA, PDLC, NSN, Mini-SC, etc. It used in the top of FTTA outdoor base station tower, outdoor connection of BBU to RRU equipment port and other optical fiber wiring environment. Features Good mechanical and environmental characteristics; Flame retardant characteristics meet

Mini armored cable (MAC) patch cords Features Low insertion loss High return loss Good repeatability Mini Armored Cable Structure Fiber Optic Cable Specifications Parameter Specifications Fiber Type SM (G652D, G657A) or MM (OM1~OM5) (OM1~OM5) Fiber Count 1~12 Tight Buffer Fiber Diameter (mm) 0.6±0.05 Strength Member Aramid yarn Braid SUS304 Cable Outer Jacket Material PVC/LSZH/PU Color Blue Cable Outer Diameter (mm) (±0.2) 7.5 Cable Weight (kg/km) 75 Tensile Strength (N) Long

DA- GJXFH FTTH Drop Cable Patch cord Dawnergy’s fiber optic patch cords are available in either single mode or multi-mode for various applications such as long-haul telecommunication networks, short-link systems and equipment-to-equipment data links. GJXFH FTTH Drop Cable Drawing Jacket color can be customized Main Cable Specifications Item Description Fiber Core 1 or 2 Cable Diameter (2.0±0.1) × (3.0±0.1) mm Strength Member Material FRP Diameter 0.50±0.05 Optical Fiber Type

2~48F Fiber Optic Pigtail Bundle Indoor Bundle Fiber Optic Cable Construction Features Excellent stripping performance of tight buffer fiber Aramid yarn as strength member providing good tensile strength Applications Indoor cable distribution Backbone cable distribution in a building Specifications Parameters Specifications Cable Type Indoor bundle fiber optic cable Fiber Type SM (G652D, G657A) or MM (OM1~OM5) Insertion Loss (dB) ≤ 0.3 Return Loss (dB) ≥ 50 (UPC), ≥ 60(APC),

Fiber Optic Pigtail Simplex Features Low insertion loss High return loss Good repeatability High temperature stability Specifications Parameters Specifications Fiber Type SM (G652D, G657A) or MM (OM1~OM5) Insertion Loss (dB) ≤ 0.3 Return Loss (dB) ≥ 50 (UPC), ≥ 60(APC), ≥ 30 (MM) Connector Type SC/FC/LC/ST/E2000 or customized Fiber Cores 12pcs simplex as a bundle Outer Dimension 0.9mm, 2mm, 3mm or customized Material of Outer Jacket PVC, LSZH or customized Cable Length 1m,3m

12~432F Fiber Optic Pigtail FanoutFiber optic pigtails provide a fast way to make communication devices in the field. They are designed, manufactured and tested according to protocol and performance dictated by the industrial standards, which will meet your most stringent mechanical and performance specifications. FeaturesLow insertion lossHigh return lossGood repeatabilityHigh temperature stability Cable Profile View Cable Parameters ItemsSpecificationsFiber Count24