Metal Seated Ball Valve

Metal to Metal Seated Trunnion Type Ball Valve Technical specification Design reference API ASME Design standard API6D ASME B16.34 Structural length Flanged ends API6D ASME B16.10 Welded connection Flanged ends ASME B16.5 Butt-welding ends ASME B16.25 Test &inspection API6D API598 Note: The dimension of connecting flange and butt welding terminals can be designed according to customers’ requirements. Metal to metal sealed design has been employed perfectly for the ball and

Metal to Metal Seated Side Entry Reduced Bore Ball Valve Technical specification Design reference API ASME Design standard API6D ASME B16.34 Structural length Flanged ends API6D ASME B16.10 Welded connection Flanged ends ASME B16.5 Butt-welding ends ASME B16.25 Test &inspection API6D API598 Note: The dimension of connecting flange and butt welding terminals can be designed according to customers’ requirements. Metal to metal sealed design has been employed perfectly for the

Metal to Metal Seated Reduced Bore Ball Valve Metal to metal sealed design has been employed perfectly for the ball and seat, which has also adopted the advanced hardening technolohies, such as ultro-sonic spray coating, nickel base spray welding, surface specially hardening, stellite spray welding. ceramic materiai with high strength and hardness, and so on. Surface hardness of the ball and seat may generally reach more than HRC6O, Maximun is up to HRC74, amd application

Metal To Metal Seated Full Bore Ball Valve Metal to metal sealed design has been employed perfectly for the ball and seat, which has also adopted the advanced hardening technolohies, such as ultro-sonic spray coating, nickel base spray welding, surface specially hardening, stellite spray welding. ceramic materiai with high strength and hardness, and so on. Surface hardness of the ball and seat may generally reach more than HRC6O, Maximun is up to HRC74, amd application

Metal to Metal Seated Floating Type Ball Valve Technical specification Design reference API ASME Design standard API6D, API608 ASME B16.34, BS5353 Structural length Flanged ends API6D ASME B16.10 Welded connection Flanged ends ASME B16.5 Butt-welding ends ASME B16.25 Test &inspection API6D API598 Note: The dimension of connecting flange and butt welding terminals can be designed according to customers’ requirements. Metal to metal sealed design has been employed perfectly for

Metal to Metal Seated Trunnion Type Ball Valve Technical specification Design reference API ASME Design standard API6D ASME B16.34 Structural length Flanged ends API6D ASME B16.10 Welded connection Flanged ends ASME B16.5 Butt-welding ends ASME B16.25 Test &inspection API6D API598 Note: The dimension of connecting flange and butt welding terminals can be designed according to customers’ requirements. Metal to metal sealed design has been employed perfectly for the ball and

2 Pcs Full bore Floating Type Ball Valve Ball Valve Type Design and Manufacture Face to Face/End to End Flange Dimensions Pressure Temperature Rating Inspection and Test Split Flange ball valve BS5351 ANSI B16.10 ANSI B16.5 ANSI B16.34 API6D Fixed flange ball valve API6D/API608 API6D ANSI B16.47 ANSI B16.34 API598 Main Material Body material Trim material Seal material Gasket/Packing WCB/LCB/CF8/CF8M/CF3/CF3M,ETC. SS410, SS420, SS304, SS316,ETC PTFE, RPTFE, PEEK, PPL, ETC.

2 Pcs Full bore Floating Type Ball Valve Ball Valve Type Design and Manufacture Face to Face/End to End Flange Dimensions Pressure Temperature Rating Inspection and Test Split Flange ball valve BS5351 ANSI B16.10 ANSI B16.5 ANSI B16.34 API6D Fixed flange ball valve API6D/API608 API6D ANSI B16.47 ANSI B16.34 API598 Main Material Body material Trim material Seal material Gasket/Packing WCB/LCB/CF8/CF8M/CF3/CF3M,ETC. SS410, SS420, SS304, SS316,ETC PTFE, RPTFE, PEEK, PPL, ETC.

2 Pcs Reduced bore Floating Type Ball Valve Ball Valve Type Design and Manufacture Face to Face/End to End Flange Dimensions Pressure Temperature Rating Inspection and Test Split Flange ball valve BS5351 ANSI B16.10 ANSI B16.5 ANSI B16.34 API6D Fixed flange ball valve API6D/API608 API6D ANSI B16.47 ANSI B16.34 API598 Main Material Body material Trim material Seal material Gasket/Packing WCB/LCB/CF8/CF8M/CF3/CF3M,ETC. SS410, SS420, SS304, SS316,ETC PTFE, RPTFE, PEEK, PPL, ETC.

Top Entry Ball Valve,Online Maintenance Easy,Integral Body Ball Valve,Online Replacement &Repair,Reduce external leakage Design Data Design standard: API 6D,DIN3357-1 , EN12516-1 Face to Face standard: API6D, ASME B16.10, DIN3202 Connecting Standard: ASME B 16.5, ASME B16.47, DIN 2543/4,ASME B 16.25 Test & Inspect Standard: API 6D ,API 598 Working Temperature: -196℃~610℃ Connection type: RF,RTJ,FF,BW.BSPT,NPT Sour environment:NACE MR0175 Design Feature 1: Full bore or reduced

Four Way Ball Valve DOUBLE BLOCK & BLEED (DBB) When the ball is in the closed position, each seat seals off the process medium independently at the same time between the up/down stream and body cavity, it allows bleeding the trapped cavity pressure (DBB) through drain and vent valve. The double block and bleed function make it possible to flush the valve under pressure and verify that the seat are sealing properly. Sealing Options Soft seat: Metal to Metal O-Ring seal Simple

Four Way Mulriple Bore Ball Valve Three way ball valves are suitable for using on various kinds of pipelines of Class150 ~ Class300,PN16- PN40 for switching, dividing, and combining medium flow, of which the operation manners include manual, worm gear, pneumatic or electric actuators, connection manners are in general of flanges. As required by customers ,the other type of connection is available too. L type three way ball valve (type of Q44) is used for pipelines to switch

Four Way full bore Ball Valve Three way ball valves are suitable for using on various kinds of pipelines of Class150 ~ Class300,PN16- PN40 for switching, dividing, and combining medium flow, of which the operation manners include manual, worm gear, pneumatic or electric actuators, connection manners are in general of flanges. As required by customers ,the other type of connection is available too. L type three way ball valve (type of Q44) is used for pipelines to switch the

Three Way Ball Valve L type Three way ball valves are suitable for using on various kinds of pipelines of Class150 ~ Class300,PN16- PN40 for switching, dividing, and combining medium flow, of which the operation manners include manual, worm gear, pneumatic or electric actuators, connection manners are in general of flanges. As required by customers ,the other type of connection is available too. L type three way ball valve (type of Q44) is used for pipelines to switch the

Three Way Ball Valve L type Design Feature 1: Full bore or reduced bore 2: Integral body structure 3: Double Block & Bleed, Double isolation and bleed(DIB-1&DIB-2) 4: Fire safe design(API 607) 5: Blowout-proof system 6: Anti-static design 7: Self cavity relief 8: Fugitive emission testing(optional) The ball is fixed by trunnion and stem for size 4” &smaller. Trunnion plate support for size 6” & larger Design Standard API6D Pressure-Temperature Rating ASME B16.34 Face to Face

3 Pieces Metal to Metal Seated Gear Manual Operation Ball Valve Metal to metal sealed design has been employed perfectly for the ball and seat, which has also adopted the advanced hardening technolohies, such as ultro-sonic spray coating, nickel base spray welding, surface specially hardening, stellite spray welding. ceramic materiai with high strength and hardness, and so on. Surface hardness of the ball and seat may generally reach more than HRC6O, Maximun is up to HRC74,

Metal to Metal Seated Gear Manual Operation Ball Valve Metal to metal sealed design has been employed perfectly for the ball and seat, which has also adopted the advanced hardening technolohies, such as ultro-sonic spray coating, nickel base spray welding, surface specially hardening, stellite spray welding. ceramic materiai with high strength and hardness, and so on. Surface hardness of the ball and seat may generally reach more than HRC6O, Maximun is up to HRC74, amd

Metal to Metal Seated Pneumatic Operation Ball Valve Metal to metal sealed design has been employed perfectly for the ball and seat, which has also adopted the advanced hardening technolohies, such as ultro-sonic spray coating, nickel base spray welding, surface specially hardening, stellite spray welding. ceramic materiai with high strength and hardness, and so on. Surface hardness of the ball and seat may generally reach more than HRC6O, Maximun is up to HRC74, amd

Metal to Metal Seated Side Entry Full Bore Ball Valve Technical specification Design reference API ASME Design standard API6D ASME B16.34 Structural length Flanged ends API6D ASME B16.10 Welded connection Flanged ends ASME B16.5 Butt-welding ends ASME B16.25 Test &inspection API6D API598 Note: The dimension of connecting flange and butt welding terminals can be designed according to customers’ requirements. Metal to metal sealed design has been employed perfectly for the ball