Outdoor Wireless Surveillance System

UBNT Networks AIRFIBER 24.24 GHz AF-24 Outdoor Wireless Point to Point Radio Featuring a dual-independent 2x2 MIMO 24GHz hi-gain reflector antenna system, airFiber can operate in both FDD (Frequency Division Duplex) and HDD (Hybrid Division Duplex) modes for unparalleled speed and spectral efficiency in the 24GHz worldwide license-free band. Introducing airFiber, a truly revolutionary 24 GHz Point-to-Point radio from Ubiquiti Networks. Housed in a compact, highly efficient

UBNT Networks AIRFIBER 24 GHz AF-24HD Outdoor Wireless Point to Point Radio Installation Requirements 17 mm wrench 13 mm socket wrench or driver Clear line of sight between airFiber radios Clear view of the sky for proper GPS operation Mounting location with < 0.5° displacement due to twist and sway under wind loading Mounting point: At least 1 meter below the highest point on the structure For tower installations, at least 3 meters below the top of the tower Ground wires –

UBNT AF-2G24-S45 Outdoor remote link powerful communication antenna Installation Requirements airFiber AF-2X radio (sold separately) Phillips screwdriver 16 mm wrench 24 mm wrench Clear view of the sky for proper GPS operation Mounting point: At least 1 m below the highest point on the structure For tower installations, at least 3 m below the top of the tower Ground wire – min. 10 AWG (5 mm2) and max. length: 1 m. As a safety precaution, ground the airFiber radio to a

UBNT AF-3G26-S45 Outdoor remote link powerful communication antenna Installation Requirements airFiber 3X radio (sold separately) Phillips screwdriver 16 mm wrench 24 mm wrench Clear view of the sky for proper GPS operation Mounting point: At least 1 m below the highest point on the structure For tower installations, at least 3 m below the top of the tower Ground wire – min. 10 AWG (5 mm2) and max. length: 1 m. As a safety precaution, ground the airFiber radio to a grounded

UBNT AF-5G23-S45 AF-5X dedicated antenna 5G 23dbi 45 degree dual polarization​ Installation Requirements 5 GHz airFiber radio (sold separately) 13 mm wrench Other Requirements Clear line of sight between airFiber radios Clear view of the sky for proper GPS operation Vertical mounting orientation Mounting point: At least 1 m below the highest point on the structure For tower installations, at least 3 m below the top of the tower Ground wires – min. 10 AWG (5 mm2) and max.

UBNT AF-5G34-S45 AF-5X Point-to-point microwave antenna 34dBi gain 45 degree dual polarization Installation Requirements 5 GHz airFiber radio (sold separately) Phillips #1 screwdriver 16 mm wrench 24 mm wrench Clear view of the sky for proper GPS operation Mounting point: At least 1 m below the highest point on the structure For tower installations, at least 3 m below the top of the tower Ground wire – min. 10 AWG (5 mm2) and max. length: 1 m. As a safety precaution, ground

UBNT dual polarization sector wireless 2.4GHz AM-2G15-120/AM-2G16-90 120 degree 15dBi gain Installation Requirements Rocket®M2 (sold separately) 12 mm and 13 mm wrenches Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from

UBNT Networks AIRFIBER 5 AF-5U 5.7 - 6.2 GHz Point to Point Links 5GHz Two airFiber models are available for 5 GHz. The model, AF5, features the popular mid-band frequencies, which are freely used in many parts of the world. The high-band model, AF5U, which can operate in the 5.7 - 6.2 GHz bands, has robust filtering to enable co-location with devices operating in the lower 5 GHz bands while allowing operation at a higher output power in many areas of the world. Model

UBNT AMO-2G13 2.4G 13dB MIMO dual polarization fiberglass omnidirectional antenna RM2 gain antenna Overview The airMAX® Omni Antenna is a carrier-class 2x2 dual-polarity MIMO omnidirectional antenna designed to seamlessly integrate with Rocket radios (Rocket sold separately). On the right is one example of how the airMAX Omni Antenna can be deployed in a Point-to-MultiPoint (PtMP) network. Flexibility To support your specific application, the airMAX Omni Antenna is available

UBNT NanoBeam M5 NBE-M5-16 5GHz 5.8G 300M wireless bridge CPE client Installation Requirements The NanoBeam can be mounted on a pole or to a wall. A Metal Strap (included) is used for pole-mounting. For wall-mounting, a suitable fastener such as a screw or bolt (not included) is required. 7 mm socket wrench or screwdriver (for pole-mounting) Wall fastener (for wall-mounting) Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be

UBNT NBE-M5-19 Gigabit wireless bridge point to point 15 km monitoring CMCC 300M Installation Requirements The NanoBeam can be mounted on a pole or to a wall. A Metal Strap (included) is used for pole-mounting. For wall-mounting, a suitable fastener such as a screw or bolt (not included) is required. 7 mm socket wrench or screwdriver (for pole-mounting) Wall fastener (for wall-mounting) Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections

UBNT PS-5AC high-power gigabit wireless bridge ac shielded airMAX AC radio base using airPrism technology Installation Requirements The PS-5AC can be used with one of the following antennas (not included): Horn-5-30 Horn-5-45 Horn-5-60 Horn-5-90 U-OMT-Dish The GPS Antenna needs to have clear line of sight to the sky for proper GPS operation. 13 mm wrench 5 mm hex socket (recommended for the Mounting Bracket) Shielded Category 5 (or above) cabling with drain wire should be

UBNT dual-polarized bridge dish antenna RD-5G30-LW 30dBi gain 5GHz long-distance point-to-point Installation Requirements 5 GHz Rocket® radio (sold separately) Phillips screwdriver 13 mm wrench Wrench or channel lock pliers with 63.5 mm (2.5") capacity Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and

UBNT AirGrid M5 upgraded version AG-HP-5G23 high-power 7 km wireless bridge Installation Requirements 10 mm or 3/8" wrench Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcable

UBNT ETH-SP-G2 Gigabit wireless outdoor bridge Ethernet port surge protector ETH IN/OUT Port Passive surge-protected RJ45 Ethernet ports. Grounding Point The ETH-SP-G2 must be grounded by one of the following methods: Using the included Self-Tapping Screw to ground the ETH-SP-G2 directly to a grounded metal pole or structure; or Using an M5 machine screw and nut (not included) to attach a drain wire that is connected to a remote grounding block or structure. Installation

UBNT EdgePoint EP-R6 multi-service 5-port Gigabit wired router supports 24V POE Installation Requirements Phillips screwdriver 7 mm socket wrench Ground wire – min. 10AWG (5 mm2) and max. length: 1 m. As a safety precaution, ground the EdgePoint to a grounded mast, pole, tower, or grounding bar. Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your

UBNT RocketDish RD-2G24 High Bandwidth 200 km/h Wireless Bridge 1 buyer Installation Requirements 2.4 GHz Rocket® radio (sold separately) Phillips #1 screwdriver 16 mm or 5/8" wrench 24 mm wrench Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial

UBNT UBB 60 GHz Gigabit Outdoor Wireless Bridge Surveillance System Ubiquiti UBB is a bidirectional 60 GHz Plug and Play 1.7+ Gb / s bridge with 5 GHz radio redundancy and a managed UniFi controller. The range of the device is up to 500 m. The most important features - Provides point-to-point Wi-Fi connection - 60 GHz radio + 5 GHz backup radio - Bandwidth up to 1.7 Gb / s - Transmission power 25 dBm (5 GHz) - Gain - 17.2 dBi (60 GHz), 10 dBi (5 GHz) and 2 dBi (2.4 GHz) -

UBNT LTU compatible 27 dBi high gain mirror U-OMT-Dish bridge base station The UBNT U-OMT-Dish single is a Hi-Gain 27dBi LTU compatible parabolic antenna designed for use with the PrismStation and IsoStation and features the same twist lock style connector, no SMA cables needed, keeping install times to a minimum. Its Hi-Gain and narrow beam width (6.5 degrees) make it ideal for long distance back-haul PtP links. U-OMT-Dish Antenna gain 27 dBi HPOL and VPOL Beamwidth 6.5 Deg

UBNT RocketM2 2.4GHz wireless bridge high-power long-distance external antenna Product number Rocket M2 Transmission rate Throughput: 150Mbps Antenna type Built-in antenna: none Transmit power Maximum power: 28dbm Communication distance Additional antenna can reach 30 kilometers Port type 1×10/100 Ethernet port Rated voltage (V) 12V 1A Appearance parameters 160mm*80mm*30mm Environmental parameters Working temperature (℃):-30~75℃ Working humidity:5%—95%