Drilling Rig Mud Pump

SERVA TPD/TPE 600 Triplex Plunger Pumps SERVA TPD/TPE 600 Triplex Plunger Pumps are used for cementing and acidizing service. Their short length allows back-to-back placement of two pumps on the unit with less than 102' total width. TPE600 pumps can be more effectivein preventing the leaking fluid from entering the power end. Specifications Maximum Input Horsepower 600 bhp Maximum Rod Load 100,000 lbs Stroke Length 6" Gear Ratio 4.6:1 Plunger 2.75" to 4.5" Approx. Length 50

API-7K Triplex Mud Pump - Fluid End Module and assembly Product description: Hydraulic cylinder is also called the valve box, it is a major part to the fluid end parts. Blank forged by high strength alloy steel. After heat treated, with multi-channel processes. The three cylinders of each pump is interchangeable. The following key parts: cone sawtooth thread of cylinder head, connect of the curve of all the screw hole and inner cavity. Technical parameter : EMSCO: F-500 F-800

TPH 400 Drilling Rig Mud Pump Triple Plunger Pump Maximum Input Horsepower 600 bhp Descriptions of TPH 400 Drilling Rig Mud Pump Triple Plunger Pump Maximum Input Horsepower 600 bhp: TPH 400 Triplex Plunger Pumps are good for high-pressure well services. Each pump is equipped with a gear case. The Triplex Pump is designed to pump cement slurries, sand-laden fluids, crude oil, acids, mud and other oil well servicing fluids. Specifications Maximum Input Horsepower 600 bhp

SCP RA 6x5x9 1/2 Centrifugal Pump The SCP RA 6 x 5 x 9 1/2 centrifugal pump is specially designed for mixing operations for fluid, cementing and acidizing jobs in oil filed application. It features compact structure, light weight and large displacement. It is capable of providing higher volumes than SCP RA 5x4x8 3/8 Centrifugal Pump. Major features: 1. Designed to meet SAE “C” hydraulic motor input size; 2. The hydraulic motor is connected to through splines, to significantly

KTZ900 Plunger Pump,reciprocating, positive displacement, single acting, horizontal three-cylinder piston pump KTZ900 pump is a reciprocating, positive displacement, single acting, horizontal three-cylinder piston pump, the pump's maximum input power is 900HP. The pump is widely used in oil well operations such as acidification, fracturing and mud injection. Main structural features: 1. It consists of two parts: power end assembly and hydraulic end assembly; 2. the crankshaft

KTZ1000 Plunger Pump, reciprocating, positive displacement, single acting, horizontal three-cylinder plunger pump KTZ1000 pump is a reciprocating, positive displacement, single acting, horizontal three-cylinder plunger pump, the pump's maximum input power is 1000HP. The pump is widely used in oil well operations, such as acidification, fracturing, killing and other conditions. Main structural features: 1. It consists of two parts: power end assembly and hydraulic end assembly

SERVA QPA 2500 Quintuplex Plunger Pump The QPA 2500 is a reciprocating, positive displacement, horizontal single-acting, quintuplex plunger pump, which is rated at 2500 brake hp input maximum. The pump is designed for duty well service applications such as acidizing, fracturing, well killing etc. The QPA 2500 pump consists of a power end assembly and a fluid end assembly. Different fluid end cylinders are available to accommodate serveral plunger sizes for a variety pressure

SERVA TPA 2250 Triplex Plunge Pumps SERVA TPA 2250 is a reciprocating, positive displacement, horizontal single-acting, triplex plunger pump which is rated at 2,250 brake HP input maximum. The pump is designed for severe-duty well service applications, such as acidizing, fracturing, well killing, etc. The TAP 2250 pump consists of a power end assembly and fluid end assembly. Different flued cylinders are available to accommodate serveral plunger sizes for a variety of

RS-F500 Drilling Mud Pump API 7K 500HP 5000psi Specification: Rated Input Power:373 kW(500HP) Stroke Per Minute:165 SPM Stroke Length:190.5mm(7 1/2") Gear Ratio:4.286:1 Max. Working Pressure:34.5MPa(5000psi) Valve: API#5 Max.Liner Size:170mm(6 3/4") Suction Inlet Flange :203.2mm(8")flange Discharge Outlet Flange:101.6mm(4")flange,34.5MPa(5000psi) Overall Dimension (L×W×H):3639×2369×2315mm³(11.94×7.77×7.6ft³) Approx Weight:9543 kg(21039lb) Performance Date of RS-F500 Mud Pmup

API 6A Mud Gate Valve Mud Gate Valve The union ends mud gate valves is mainly used for drilling and circulating system in oilfeid .it is used to control the flowing and stopping of mud and is joined trapezoid thread connection ,can be installed quickly and conveniently. The equipment has strong rigidity which parallel-type Metal to Metal Sealing ,its sealing effect is good,and it is convenient for opening. Two ends of the valve and pipes are connected by spherical movement .

RMKP-550 Mud Pump • RMKP-550 Pump Technical specifications • Input power rating (KW) 410 (550HP) • Rated pump speed (RPM) 145 • Stroke Length (mm) 177.8(7”) • Gear ratio 4.625 • Rated speed of transmission shaft (RPM) 670 • Max. working pressure (Kg/sq.cm) 352 (5000PSI) • Valve size (API) 7# • Max. liner diameter (mm) 7.75” • Max. displacement (GPM) 622 • Max. liner pressure (Kg/sq.cm) 96 (1364PSI) • Diameter of suction pipe (mm) 203.2 (8”) • Diameter of discharge pipe (mm)

KTZ2000 Plunger Pump, reciprocating, positive displacement, single acting, horizontal three-cylinder piston pump KTZ2000 pump is a reciprocating, positive displacement, single acting, horizontal three-cylinder piston pump, the pump's maximum input power is 2000HP. The pump is widely used in intermittent well operations, such as acidizing, fracturing and killing. Main structural features: 1. It consists of two parts: power end assembly and hydraulic end assembly; 2. adopt

Drilling Rig VFD Control System System Overview The system adopts a multi-drive variable frequency speed control system, and VFD systems for drilling rigs with drilling depths ranging from 3000 to 12000 meters are developed and produced. The system utilizes fully digital vector control voltage-type AC variable frequency speed regulating devices, featuring frequency control modes with V/F characteristic curves and field-oriented vector control. Key Features High-performance

Dynamic MEMS North Seeker for Heading Machine Product Overview The ER-MNS-05AD dynamic north seeker utilizes advanced MEMS gyro technology to achieve an optimal balance between compact size and high performance. Its small form factor enables easy integration into various compact equipment and complex systems, making it ideal for space and weight-sensitive applications. Primarily used in mining engineering, underground excavation, and construction sectors, it can be seamlessly

Mud Pump Valve API 7K Matching specifications ( inch): 6v1/7V1/7V2 Process: Integral forging + Integral carburising Inspection method: magnetic particle flaw detection full inspection We can provide Chinese famous brands, such as RG, SJ, Serva, BOMCO, BOMCO wire rope, LS, as well as some of foreign brands, such as Allison, Varco, NOV, Atlas.And we get more advantage in supplying replacement for those famous brands above. Xi’an ATO International Co., Ltd. was founded in 2008,

Mud Pump Valve API 7K Matching specifications ( inch): API-6/API-7 Process: Integral forging + Integral carburising Inspection method: Magnetic particle flaw detection full inspection Xi’an ATO International Co., Ltd. was founded in 2008, a supplier who is deeply specialized in upstream oil field for more than 10 years. We can provide Chinese famous brands, such as RG, SJ, Serva, BOMCO, BOMCO wire rope, LS, as well as some of foreign brands, such as Allison, Varco, NOV, Atlas

Mud Pump Vavle API 7K Matching specifications ( inch): G2-8 Process: whole forging + whole carburising Inspection method: magnetic particle flaw detection full inspection We can provide Chinese famous brands, such as RG, SJ, Serva, BOMCO, BOMCO wire rope, LS, as well as some of foreign brands, such as Allison, Varco, NOV, Atlas.And we get more advantage in supplying replacement for those famous brands above. Xi’an ATO International Co., Ltd. was founded in 2008, a supplier

Cost-effective MEMS Integrated Navigation System The ER-GNSS/MINS-03 is a high-performance integrated navigation system combining MEMS inertial technology with dual-antenna GNSS positioning for superior accuracy and reliability across land, aviation, and marine applications. Key Features High reliability and precision MEMS gyroscope and accelerometer technology Built-in full-band, full-system dual-antenna positioning and orientation GNSS module Precision aluminum alloy

Mapping-level & Ultra-precision GNSS/MEMS INS Advanced integrated navigation system delivering mapping-level accuracy with ultra-precision GNSS and MEMS inertial navigation technology. Key Features High-Accuracy Navigation: Integrated mapping-level navigation with attitude accuracy of 0.01° (0.004° post-processing) and heading accuracy of 0.05° (0.01° post-processing) Signal Loss Performance: Maintains high-precision navigation for 60 seconds during satellite signal loss with

Dual System (Gyro+Fluxgate) Trajectory Surveying Device for Mining The ER-GyroTracker-21 is an intelligent real-time borehole trajectory surveying device designed specifically for mining applications. This advanced system consists of a compact surveying probe and a mining smartphone as its core components, providing accurate trajectory measurement while drilling. Compact Design & Dual Measurement Systems The probe features a slim 24.75mm diameter and incorporates both high