Drilling Handling Tools

API 8C certified DDZ-350 drilling elevator with 350 short tons rated capacity. Centralizer type for easy operation. 100% NDT and hydraulic tested. Suitable for 3 1/2"-5 7/8" drill pipe. Custom options available.

API Spec 8C certified drilling hook with 1350 KN max hook load and 165 mm major-hook opening. Cast from special alloy steel with reliable safety and braking devices. NDE tested on primary load parts. Hydraulic snubber protects drill pipe connectors.

API Spec 8C certified traveling block with 1350 KN max hook load and 915 mm sheave diameter. Features thick steel side plates, quenched grooves, rope covers, and individual bearing lubrication. Interchangeable sheaves and bearings with matching crown block. Durable and efficient for heavy-duty drilling operations.

Designed for safe handling and hoisting of 18° taper drill pipe in oil and gas drilling. Manufactured per API Spec 8C. Features high load capacity, durable construction, and precise aperture fit. Custom options available.

SE Slip Type Elevators are air-operated tools for casing handling up to 20 inches. Designed per API & ISO, they offer easy operation, dependability, and reduced workload. Available in 150-500 ton capacities with 0.6-0.8 MPa working pressure.

DDZ series center latch elevator with 18° taper shoulder for handling drilling pipe and tools. Rated capacity 100 short tons, size 2 3/8-5 in. Durable, efficient, and available with MG certification. Custom options available.

High-capacity swivel with 675 kN max load and 300 kN main axle rating. Features a 2 7/8" UP DP lower thread for reliable kelly connection. Durable construction with gooseneck and rotary hose compatibility. Ideal for demanding drilling operations.

Hydraulic power tong with inner cam rolling-up clamping and hydraulic backup tong. Ideal for makeup or breakout of tubing, casing, and drill pipes. Features high gear torque 700N.m and low gear torque 1800N.m. Optional automatic torque control system and extra long rod for backup tong.

Designed for quick rod size conversion with replaceable rod plates. Features excellent balance and non-tilt performance. Easy front and rear release levers for safe latching. Manufactured per API Spec 8C for durability and reliability in demanding operations.

Multi-segment casing slips designed for OD 4-1/2 to 5 in, API 7K certified. Firm structure, lightweight, and large holding range accommodate casing wear. Custom sizes available up to 30 in.

High-capacity swivel rated for 675 kN load and 15 MPa pressure. Features durable construction with gooseneck and REG thread connections. Available in standard and double-duty models for enhanced drilling efficiency.

Drilling hook with special alloy steel body, bail, and bail support. Features hydraulic snubber assembly, safety device, and NDE-tested primary load parts. Available in models up to 6750 kN. API 8C certified.

ZQ Series hydraulic power tong combines spinning and torque functions for efficient make-up and break-out. Designed per API Spec 7K, it offers max torque up to 125 kN.m and 1500 mm cylinder stroke. Durable, reliable, and available in multiple models for various pipe sizes.

This substructure supports a rotary beam capacity of 2250 KN with a rotary height of 3.8 m above ground. Available in skid, truck, trailer, piled box, sling-shot, and swing-lift configurations. Durable design ensures efficient rig operations and easy installation.

This rotary table features a 610mm center inner diameter and 11230 Nm max working torque. Built with cast steel casing, alloy steel master bushing, and mid-hard tooth face arc gear for durability and steady transmission. API standard bushing compatible, reliable seals, and effective lubrication ensure long service life.

Hydraulic power tong with inner cam rolling-up clamping, ideal for makeup/breakout of tubing, casing, and drill pipe. Features 12000 kN.m lo-gear torque, 12 MPa rated pressure, and optional automatic torque control. Durable, efficient, and customizable for workover operations.

Internal hook for fishing ropes, wire lines, and debris from casing or tubing. Durable design with hook tooth for secure retrieval. Max OD 114 mm, compatible with 5-1/2 tubing. Custom options available.

This junk mill features a flat bottom with YD alloy and anti-abrasive material for efficient milling of fish like bits and subs. OD 195 mm, total length 540 mm, with 4-1/2REG connection. Durable and reliable for downhole operations.

Integral blade stabilizer for oil and gas drilling, controls well deviation and stabilizes drilling tools. Available in spiral or straight blade designs. Salvage diameter 120.7mm (4-3/4in) with 600mm fishing neck. Enhances bit life, drilling speed, and borehole quality. Customizable options available.

Casing scraper effectively removes cement, sand, and debris from casing inner surfaces. Suitable for 10-3/4 inch casing with a scraper range of 177-155mm. Ensures smooth tripping of downhole tools and packer operation. Durable, efficient, and customizable.