RF PCB Board

Brief Introduction This PCB is a 2-layer rigid board with stackup of 1oz (35μm) copper on top layer and bottom layer, sandwiching the 20mil DiClad 527 core material. The board measures 150mm x 32mm and maintains precise dimensions with a tolerance of +/- 0.15mm. The minimum width for traces and spaces is 7/7 mils, allowing for intricate pattern and design flexibility. The finished board thickness is 0.6mm and the vias have a plating thickness of 20μm, enhancing their

Substrate Introduction Rogers DiClad 527 laminates are composite materials reinforced with woven fiberglass for use as substrates in printed circuit boards. These laminates offer a higher proportion of fiberglass reinforcement compared to PTFE content. This carefully balanced ratio results in a wider range of dielectric constant (Dk) and improved dimensional stability and registration. Standard Panel Sizes for DiClad 527: 18" x 12" (457 x 305mm) 18" x 24" (457 x 610mm)

We're delighted to introduce our newly shipped PCB.It's Based on TLX-0 High-Performance substrate,which is a state-of-the-art circuit material designed to meet the demanding requirements of RF and microwave applications. With its exceptional properties and robust construction, this PCB offers unparalleled performance and reliability. Let's explore the features, benefits, and applications that make the TLX-0 stand out from the rest. 1. TLX-0 Introduction: The TLX-0 is part of

Introducing our newly shipped PCB which is based on the RT/duroid 6035HTC high Frequency material. The RT/duroid 6035HTC High Frequency substrate is a cutting-edge circuit material designed specifically for high power RF and microwave applications. With its ceramic filled PTFE composites, this exceptional PCB offers unparalleled performance and reliability. Let's delve into the features and benefits that make this PCB stand out from the rest. Features: 1. DK of 3.5 +/- 0.05

Introducing our newly shipped RF PCB built on the renowned RT/duroid 5880 substrate. Intended for high-frequency applications, this PCB delivers exceptional performance and reliability. Let's explore its outstanding features and benefits in detail: The RT/duroid 5880 substrate is a high-frequency laminate composed of PTFE composites reinforced with glass microfibers. This combination ensures a low dielectric constant (Dk) and minimal dielectric loss, making it an ideal choice

Introducing our newly shipped RF PCB which is based on rogers RT duroid 5870 material. Rogers RT/duroid 5870 high-frequency laminates are composite materials made of PTFE reinforced with glass microfibers. These laminates offer exceptional high-frequency performance with a low dielectric constant (Dk). The random orientation of microfibers in the PTFE composite ensures consistent Dk values. RT/duroid 5870 laminates are ideal for applications requiring high frequency and

Today, we are happy to share our newly shipped PCB based on RO3010 materials. 1. RO3010 Introduction: Rogers RO3010 laminates are advanced circuit materials that utilize ceramic-filled PTFE composites. These laminates offer a higher dielectric constant with excellent stability. They are competitively priced products known for their exceptional mechanical and electrical stability, making them suitable for a wide range of applications across various frequencies. RO3010

Introducing our newly shipped PCB made of RO306 substrates. RO3006 Introduction: Rogers RO3006 laminates are advanced circuit materials that utilize ceramic-filled PTFE composites. These materials are specifically designed to offer exceptional stability in both electrical and mechanical properties. One notable feature of RO3006 is its ability to maintain a stable dielectric constant (Dk) over a wide temperature range. This characteristic eliminates the step change in Dk that

Today, we are delighted to share our newly shipped PCB--based on 20mil RF-35TC high frequency lamnates. The RF-35TC PCB takes center stage as a cutting-edge solution for high-power applications, delivering exceptional performance in dissipating heat and maintaining low loss. With its unmatched thermal conductivity and minimal dissipation factor, this PCB substrate is engineered to excel in transmitting heat away from transmission lines and surface mount components, such as

Introducing our newly shipped PCB which is made of RF-30A material. The RF-30A PCB is a cutting-edge organic-ceramic laminate designed specifically for high-volume commercial microwave and radio frequency applications. Crafted with Taconic's expertise in ceramic filler and PTFE coating technology, this PCB stands as the epitome of quality and performance. Featuring woven glass reinforcement, RF-30A boasts exceptional electrical and mechanical properties that exceed the

Introducing the newly shipped RF PCB.Which is built is built on 31mil rogers DiClad 870 substrates. Designed with a focus on achieving lower dielectric constants, the DiClad 870 PCB offers exceptional electrical properties for a wide range of applications. It utilizes a unique composition of woven fiberglass and a higher ratio of PTFE content, resulting in reduced dielectric constants (Dk) and dissipation factors compared to other laminates in the DiClad series, all while

Introducing our newly shipped PCB, built with the exceptional DiClad 527 laminate by Rogers. This woven fiberglass reinforced, PTFE-based composite material offers outstanding performance as a printed circuit board substrate. With a higher ratio of fiberglass reinforcement to PTFE content, DiClad 527 provides a wider dielectric constant (Dk) range, superior dimensional stability, and precise registration. Key Features: - DK range of 2.4 to 2.6 at 10 GHz and 1 MHz, 50% RH,

Introducing our newly shipped PCB built on the CLTE-XT material by Rogers. Supplied to provide exceptional performance and reliability, the CLTE-XT laminate combines micro-dispersed ceramic filler, PTFE, and woven fiberglass reinforcement. This unique composition offers the lowest insertion loss, improved loss tangent, and superior dimensional stability in its class. The CLTE-XT PCB features a dielectric constant (DK) of 2.94 at 10GHz, 23°C @ 50% RH, ensuring precise signal

This is an RF (Radio Frequency) PCB that utilizes the AD350A substrate. The AD350A substrate is a specialized material made of woven fiberglass reinforced, ceramic filled, PTFE-based composite. This substrate is specifically designed for high-power applications, offering high thermal conductivity and low coefficient of thermal expansion (CTE). It excels in environments with temperature extremes and prioritizes heat rejection. The AD350A substrate exhibits several notable

Introducing our cutting-edge RF PCB, meticulously crafted using the innovative AD300D material from Rogers. This high-frequency laminate combines the power of ceramic-filled, glass-reinforced PTFE with exceptional electrical properties, making it the ultimate choice for RF applications that demand top-notch performance and reliability. The AD300D material is a game-changer in the world of RF PCBs. Its ceramic-filled, glass-reinforced PTFE composition ensures a low and tightly

Introducing our latest shipment PCB based on the advanced AD250 material, specifically designed for commercial microwave and RF applications. The AD250C laminate offers a tightly controlled dielectric constant of 2.50, ensuring superior performance and reliability in today's telecommunications infrastructure. Key Features: Rogers AD250C Woven Glass Reinforced PTFE Antenna Grade Laminates provide the foundation for this PCB. With a dielectric constant of 2.5 and tight

Introducing our newly shipped PCB, crafted with Rogers RT/duroid 6035HTC material, a cutting-edge substrate designed to deliver exceptional performance for your electronic designs. With its advanced features and reliable construction, this PCB unlocks new possibilities for a wide range of applications. Let's delve into the key specifications and benefits that make this PCB a game-changer for your projects. PCB Substrates: Unparalleled Performance and Thermal Stability The

Introducing our advanced 8-layer rigid PCB, which incorporates a combination of Rogers RO3003 ceramic-filled PTFE composites and S1000-2M High Tg170 FR-4 substrates, delivering exceptional performance and reliability. This PCB is engineered to meet the demanding requirements of a wide range of applications, ensuring precise signal transmission and minimizing signal loss with its dielectric constant of 3.0 +/- .04 at 10 GHz and a dissipation factor of 0.001 at the same

Introducing our cutting-edge 2-layer rigid PCB, specially crafted with Taconic RF-30 PTFE Ceramic-Glass substrate to deliver exceptional reliability and unwavering stability. This PCB is meticulously designed to meet the stringent demands of a wide range of applications, ensuring optimal signal integrity and top-notch performance. With a DK of 3.0 +/- 0.1 at 1.9 GHz/23°C and a dissipation factor of 0.0014 at the same frequency and temperature, rest assured your signals will

Introducing our newly shipped Transparent Flexible PCB, designed to offer exceptional transparency, flexibility, and reliable performance. This single-layer flexible PCB utilizes a single-sided adhesive transparent flexible copper clad laminate, providing excellent properties for various applications. With high bonding strength and good dimensional stability, this PCB ensures optimal functionality in demanding environments. The key feature of this PCB is its transparency,