Industrial Mechanical Seals

Mechanical Seal Type 1 John Crane Type 1 Seal For Aesseal P05U John Crane Mechanical Seal Type1 Replacement Operational Conditions: Reliable transmission due to special design in the drive band and drive notches. Special balancing in the elastomer bellows. design,avaliable in high-pressure application Temperature: -20ºC to +120ºC Pressure: ≤1.4MPa Speed: ≤15m/s Materials: ROTARY FACES: Carbon Graphite, Silicon Carbide, Tungsten Carbide STATIONARY SEATS: Ceramic, Silicon

Mechanical Seal 58U John Crane Seal 58U Rotary Seal For Burgmann BT.C5.KU Seal Aesseal M03S Seal John Crane T58U Seal Operational Conditions: John Crane 58U multi-spring mechanical seal Unbalanced pump seal john crane 58u mechanical seal type for industrial pump Shaft diameter: d1=14...100 mm Pressure: p=0...1.7Mpa(246.5psi) Temperature: t = -40 °C ..+200 °C(-40°F to 392°) Sliding velocity: Vg≤25m/s(82ft/m) Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring:

Single Spring 166T Rubber Bellows Mechanical Seal Aesseal Flowserve 21 Bellow Seal For Pumps Operational Conditions: 166T are single conical spring, unbalanced seal with the presence of an O-Ring for secondary sealing. Since the torque transmission comes from single coil springs, the seals are dependent on directions of rotation, which can be seen from the drive end of the shaft REPLACE FLOWSERVE TYPE 21 Material:CE CA SIC TC V EPDM NBR 304 316 Temperature: -20ºC to +120ºC

Aesseal Mechanical Seal W01 Roten Seal 7K for Water Pump Operational Conditions: Wave spring mechanical seal Mediums: Water, oil, weak acid, weak alkali, etc. Temperature: -20°C~200°C Pressure: ≤0.8MPa Speed: ≤ 15m/Sec Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal: NBR, EPDM, FKM, PTFE Spring and Metal Parts: Steel Performance Capabilities Aesseal W01 seal 68 mechanical seal rotary seal mixer seal Operational

Type 502 Elastomer Bellow Water Pump John Crane Mechanical Seal VULCAN TYPE 1724 Operational Conditions: Structure Description: Equivalent to AES B07, John Crane Type 502 mechanical seal Rubber bellows design Operating Limits: Temperature:-20---120℃ Speed: 15m/s Pressure: 25bar Standard size: 14mm--100mm Materials: Rotary Face: Carbon / SIC. Stationary Seat: Ceramic / SIC. Bellows: NBR / EPDM / FKM. Spring: SS304 / SS316. Metal Parts: SS304 / SS316. Performance Capabilities

Mechanical Seal Rubber Bellow Seal Type 2100 John Crane Mechanical Seal For Water Pump Operational Conditions: Designed for demanding applications, the Type 2100 mechanical seal is a compact, unitized, single-spring elastomer bellows seal that offers maximum durability and performance. Temperature: -20ºC to +180ºC Pressure: ≤2.5MPa Speed: ≤15m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, TC, Silicon Carbide Secondary Seal: NBR, EPDM, FKM,

Mechanical Seal Wave Spring Seal 68 Industrial Shaft Seals For John Crane 80 Flowserve 168 Seal Latty T510 Operational Conditions: Wave spring mechanical seal Mediums: Water, oil, weak acid, weak alkali, etc. Temperature: -20°C~200°C Pressure: ≤0.8MPa Speed: ≤ 15m/Sec Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal: NBR, EPDM, FKM, PTFE Spring and Metal Parts: Steel Performance Capabilities Aesseal W01 seal 68

Aesseal W01 Mechanical Seal Roten 7K Seal For Water Pump Operational Conditions: Wave sprung grub screwed 'Thin Cross Section' short working length mechanical seal. Available in Food Grade materials as standard (with FDA compliant materials). Wave spring mechanical seal Mediums: Water, oil, weak acid, weak alkali, etc. Temperature: -20°C~200°C Pressure: ≤0.8MPa Speed: ≤ 15m/Sec Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide

Mechanical Seal Fristam BCH-060 For Art. No. 0782525001 Fristam Fds Double Screw Pump Operational Conditions: Wave sprung grub screwed 'Thin Cross Section' short working length mechanical seal. Available in Food Grade materials as standard (with FDA compliant materials). Wave spring mechanical seal Mediums: Water, oil, weak acid, weak alkali, etc. Temperature: -20°C~200°C Pressure: ≤0.8MPa Speed: ≤ 15m/Sec Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring:

Fristam Seal GLRD FDS2 BCH-045 SIC-SIC-HNBR/C-TC-HNBR For Fristam Fds Double Screw Pump Operational Conditions: Wave sprung grub screwed 'Thin Cross Section' short working length mechanical seal. Available in Food Grade materials as standard (with FDA compliant materials). Wave spring mechanical seal Mediums: Water, oil, weak acid, weak alkali, etc. Temperature: -20°C~200°C Pressure: ≤0.8MPa Speed: ≤ 15m/Sec Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring

AESSEAL W13SU Single Mechanical Seals to suit Waukesha Universal II Pumps Operational Conditions: Structure Description: Equivalent to Suit for Waukesha/Wright Pumps. Rubber bellows design Operating Limits: Temperature:-20---120℃ Speed: 15m/s Pressure: 25bar Standard size: 14mm--100mm Materials: Rotary Face: Carbon / SIC. Stationary Seat: Ceramic / SIC. Bellows: NBR / EPDM / FKM. Spring: SS304 / SS316. Metal Parts: SS304 / SS316. Performance Capabilities mechanical seal

Mechanical Seals ZS-24 ForHorizontal Centrifugal CNP Pump ZS-24 ZS-32 NG-32 /BSE4/BSF4 Operational Conditions: Structure Description: ZS-24/BSE4/BSF4, ZS-32(NG-32)/BSE4/BSF4 Mechanical Seals for CNP Pumps Used For ZS50-32 ZS65-40 ZS65-50 ZS80-65 Horizontal single stage centrifugal pumps; Material: CA/SiC/FKM , SiC/SiC/FKM, CA/SiC/EPDM, SiC/SiC/EPDM; Shaft Size: 24mm (ZS-24) , 32mm (ZS-32); Materials: Rotary Face: Carbon / SIC. Stationary Seat: Ceramic / SIC. Bellows: NBR

Mechanical Seal US3A Fluiten Wave Spring Mechanical Water Pump Seal Operational Conditions: DIAMETER:20 – 100 (mm) * SPEED:0 – 20 (m/sec) PRESSURE:0 – 12 (bar g) TEMPERATURE:-100 – 250 (°C) Single seal Bi-directional Suitable for dirty liquids (single spring) Resistant to acids and bases Resistant to mechanical stress Suitable for general purpose Comply with UNI EN 12756 Configured with FLUIGAM (energized dynamic o-ring)​ Materials: Stationary Ring: Ceramic, Silicon Carbide,

AES BSAI Metal Bellows Component Seals BSAI & BSAIG For Chemical Pump Operations Conditions: Temperature: -30°C to +140°C Pressure: Up to 10 bar (145 psi) For full Performance Capabilities please download data sheet Limits are for guidance only. Product performance is dependent on materials and other operating conditions. Monolithic rotary head Highly compact design for confined spaces Wave springs for minimal operational stress Set screw drive Ideal for rotary lobe pumps

Mechanical Seal Wave Spring Seal 68 Industrial Shaft Seals For John Crane 80 Flowserve 168 Seal Latty T510 Operational Conditions: Wave sprung grub screwed 'Thin Cross Section' short working length mechanical seal. Available in Food Grade materials as standard (with FDA compliant materials). Wave spring mechanical seal Mediums: Water, oil, weak acid, weak alkali, etc. Temperature: -20°C~200°C Pressure: ≤0.8MPa Speed: ≤ 15m/Sec Materials: Stationary Ring: Ceramic, Silicon

Industrial Mechanical Seal Equivalent To W01-TL Mechanical Seal. Burgmann M7KS60 Seal Operational Conditions: Mechanical Seal Pump Oil Seal Unbalanced Shaft Seal 68A Temperature: -20ºC to +180ºC Pressure: ≤2.5MPa Speed: ≤15m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, TC, Silicon Carbide Secondary Seal: NBR, EPDM, FKM, PTFE Spring and Metal Parts: Steel Performance Capabilities Aesseal W01-TL seal 68A mechanical seal rotary seal mixer seal

Mechanical Seal Wave Spring Seal Aesseal W04 Seal Johnson Classic Seal ​ Operational Conditions: Aesseal W04 seal Roplan RT73 seal Temperature: -40ºC to +250ºC Pressure: ≤1.5MPa Speed: ≤25m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal: NBR, EPDM, FKM, PTFE Spring and Metal Parts: Steel Performance Capabilities sulzer pump Aesseal W04 seal 68E mechanical seal rotary seal mixer seal Operational Condtions Size

Wave Spring Seal Rubber Bellows Mechanical Seal 68D Medium Pump Seal For W03 Seal Operational Conditions: John Crane 87 (EI/ EC) seal Aesseal W03 seal Temperature: -40ºC to +200ºC Pressure: ≤0.8MPa Speed: ≤18m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal: NBR, EPDM, FKM, PTFE Spring and Metal Parts: Steel 3. Seat Type: 4. Applications: Clean water, sewage water, oil and other moderately corrosive fluids

water pump mechanical seal 108 Single Face Unbalanced Water Pump Seals Operational Conditions: Structure Description: Rubber bellows design Operating Limits: Temperature:-20---120℃ Speed: 15m/s Pressure: 25bar Standard size: 14mm--100mm Materials: Rotary Face: Carbon / SIC. Stationary Seat: Ceramic / SIC. Bellows: NBR / EPDM / FKM. Spring: SS304 / SS316. Metal Parts: SS304 / SS316. Performance Capabilities 108 mechanical seal rotary seal mixer seal Operational Condtions

Mechanical Seal Vulcan Type 9 Conical Spring Seal O Ring Mounted Water Pump Seal Operational Conditions: The Vulcan Type 9 is a rotor, which can be categorized as a conical spring rotor. It is an alternative to the Qseals QCS06, Vulcan 9, Burgmann M2 and 5 others. It is suited for the Speck Y-5081.0002. Temperature: -30°C to +150°C Pressure: Up to 12 bar (174 psi) Materials: Stationary Ring: CAR,CER,SIC,SSIC Rotary Ring: Q5, Resin Impregnated Carbon Graphite(Furan), SIC