Digital Power Amplifiers

Product Description 8 Ω/stereo: 2 x 1300 w 4 Ω/stereo: 2 x 2300 w 2 Ω/stereo: 2 x 2550 w 8 Ω/bridge: 4600 w 4 Ω/bridge: 5100 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: 113dB Slew Rate: >28v/μs Damping factor: >240(1KHz,8ohm) Power Supply: 90V-264V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±1dB, 5Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm

Product Description 8 Ω/stereo: 2 x 700 w 4 Ω/stereo: 2 x 1150 w 2 Ω/stereo: 2 x 1730 w 8 Ω/bridge: 2300 w 4 Ω/bridge: 3000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/μs Damping factor: >3200 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm Unbalanced

Product Description 1. Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs 2. Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup 3. Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption 4. High-performance DSP and 24

1. High performance SMPS technology + Fixed frequency PWM modulation technology 2. Energy efficient Class D power amplifier module, all is finished with SMD crafts 3. Advanced protection function (DC protection, Smart overheat management, Overheat protection, VHF protection, Soft startup protection, Limiter protection etc.) 4. Low noise, Smart Variable speed fan System Product Description 8 Ω/stereo: 2 x 1300 w 4 Ω

Product Description OEM china manufacturer 4ch 900watts class D digital 1U power amplifier PB4A900 This power amplifier using the latest generation of Class D module,so that the PB series has become the most cost-effective power amplifier and favored by professional audio. The weight is less than 9 kg, it will help to save a lot in shipping cost; and compact size in 1U and 1.5U to save installation

PB4A1300 has the core with superior performance, with class D output circuit. Can be used in various applications 1. Based on the well-known class D amplifier technology, PB4A1300 has excellent audio integrity. It has the best audio features on the market to achieve low distortion and high dynamic range. 2. class D output circuit with even lower losses and minimal increase in average AC power, dramatically reducing AC power

Cooling structions: Good heat-sink & High quality fans The cooling mode of the equipment is as follows: the cold air is sucked through the ventilation hole of the front panel, and the heat is taken out from the rear panel. Product Description 8 Ω/stereo: 2 x 700 w 4 Ω/stereo: 2 x 1150 w 2 Ω/stereo: 2 x 1730 w 8 Ω/bridge: 2300 w 4 Ω/bridge: 3000 w Slew Rate: >50v/μs Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V

Environmental protection, energy saving, cost saving Advantages of high efficiency: 1. Low working temperature, rlability will be improved obviously. 2. The size and weight are only 1/3 of tradition amplifier. 3. The cost for transportation, handling, installation will reduce obviously. 4. Saving energy, reducing operating costs 5. Environmental protection Product Description 8 Ω/stereo: 2 x 900 w 4 Ω/stereo: 2 x 1500

Power on: Power switch/Turn this switch on, connect the machine to work. Indicadores LED: Work indicator light.When the power is switched on, the red light will glow and the switch power and the green light will glow, the machine will be energized. Mode:Work mode switch,Stereo/bridge/parallel. Inputs:XLR signal balanced input interface. Product Description 8 Ω/stereo: 4 x 700 w 4 Ω/stereo: 4 x 1150 w 2 Ω/stereo: 4 x 1730 w 8 Ω/bridge: 2300 w 4 Ω

Class D Power 1u digital Amplifier for karaoke Product Description 8 Ω/stereo: 2 x 250 w 4 Ω/stereo: 2 x 425 w 2 Ω/stereo: 2 x 725 w 16 Ω/bridge: 500 w 8 Ω/bridge: 850 w 4 Ω/bridge: 1450 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated output power

Product Description 8 Ω/stereo: 4 x 450 w 4 Ω/stereo: 4 x 765 w 2 Ω/stereo: 4 x 1300 w 16 Ω/bridge: 2 x 900 w 8 Ω/bridge: 2 x 1530 w 4 Ω/bridge: 2 x 2600 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated output power,1kHz) : 1VrmsPieces frequency

Product Description 8 Ω/stereo: 4 x 1500 w 4 Ω/stereo: 4 x 2550 w 2 Ω/stereo: 4 x 4335 w 16 Ω/bridge: 2 x 3000 w 8 Ω/bridge: 2 x 5100 w 4 Ω/bridge: 2 x 8670 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated output power,1kHz) : 1VrmsPieces frequency

Product Description Class D Power amplifier with DSP processor The combination of CLASS-D and digital audio switching power supply technology has a high efficiency power conversion circuit with strong power output and low green power consumption. The panel has precise gain control and complete protection with power and status indicator, dc fault, temperature protection, undervoltage protection, overvoltage protection, overload protection and limiting protection. The

Product Description Class D Power amplifier with DSP processor The combination of CLASS-D and digital audio switching power supply technology has a high efficiency power conversion circuit with strong power output and low green power consumption. The panel has precise gain control and complete protection with power and status indicator, dc fault, temperature protection, undervoltage protection, overvoltage protection, overload protection and limiting protection. The

Product Description 8 Ω/stereo: 2 x 1200 w 4 Ω/stereo: 2 x 2000 w 2 Ω/stereo: 2 x 3400 w 16 Ω/bridge:2400 w 8 Ω/bridge: 4000 w 4 Ω/bridge: 6800 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated output power,1kHz) : 1VrmsPieces frequency response (10%

Product Description 8 Ω/stereo: 2 x 1500 w 4 Ω/stereo: 2 x 2550 w 2 Ω/stereo: 2 x 4335 w 16 Ω/bridge:3000 w 8 Ω/bridge: 5100 w 4 Ω/bridge: 8670 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated output power,1kHz) : 1VrmsPieces frequency response (10%

Product Description 8 ohm stereo output power: 300 w * 6 4 ohm stereo output power: 500 w * 6 Bridge 8 ohm power: 1000 w * 3 Distortion: 112dBA Frequency response range: 10Hz to 20k Hz,+/-1dB Input impedance: balanced 20K/ non-balanced 10K Damping coefficient: > 300 Output category: Class D Input sensitivity: 0.775V Protection: short circuit protection, dc protection, overheat protection, overload protection and voltage limit Control buttons: power start ON/OFF, volume

Product Description 8 ohm stereo output power: 300 w x 4 4 ohm stereo output power: 500 w x 4 Bridge 8 ohm power: 1000 w * 2 Distortion: 112dBA Frequency response range: 10Hz to 20k Hz,+/-1dB Input impedance: balanced 20K/ non-balanced 10K Damping coefficient: > 300 Output category: Class D Input sensitivity: 0.775V Protection: short circuit protection, dc protection, overheat protection, overload protection and voltage limit Control buttons: power start ON/OFF, volume

Product Description 8 ohm stereo output power: 300 w * 2 4 ohm stereo output power: 500 w * 2 Bridge 8 ohm power: 1000 w * 1 Distortion: 112dBA Frequency response range: 10Hz to 20k Hz,+/-1dB Input impedance: balanced 20K/ non-balanced 10K Damping coefficient: >300 Output category: Class D Input sensitivity: 0.775V Protection: short circuit protection, dc protection, overheat protection, overload protection and voltage limit Control buttons: power start ON/OFF, volume

Product Description 8 Ω/stereo: 4 x 250 w 4 Ω/stereo: 4 x 425 w 2 Ω/stereo: 4 x 725 w 16 Ω/bridge: 2 x 500 w 8 Ω/bridge: 2 x 850 w 4 Ω/bridge: 2 x1450 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated output power,1kHz) : 1VrmsPieces frequency