Wafer Butterfly Valve

2"~12", DN50~DN300 ASTM B62 Class C83600 SS304 Wafer Butterfly Valve Body Test:1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test. Seat Test:1.1 times the working pressure with water. Function/Operation Test:At the time of final inspection,each valve and its actuator (Flow-Control Lever/ Gear/Pneumatic Actuator),under goes a complete operating test (Open/Close).This test

Water, Oil, Gaz ASTM A351 Class CF8M Wafer Butterfly Valve Triple eccentric butterfly valve DN600 specifications Nominal diameter: DN50 ~ 2000mm Nominal pressure Pn (LB) : 0.6 ~ 6.4MPa Applicable medium: air, water, steam, gas, oil and acid, alkali, salt with weak corrosive medium, etc Applicable temperature: carbon steel: -29℃~425℃;Stainless steel, chrome-molybdenum steel: -40℃~550℃ Leakage rate :0.1*DNmm3/S (in line with GB//T13927-92 standard) Actuation: handle, turbine,

2~32" Wafer Type Metal Seat Butterfly Valve WCB, CF8,CF8M API 609, MSS SP-67 Body Test :1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test. Seat Test :1.1 times the working pressure with water. Function / Operation Test :At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test

DN50~DN200 Pressure PN10, PN16, Class150 Full PTFE Lined Wafer Butterfly Valve Body Test :1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test. Seat Test :1.1 times the working pressure with water. Function / Operation Test :At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test

Wafer Butterfly Valve With Blue Trigger Handle Stainless Steel ZG1Cr18Ni12Mo2Ti 2" PN10 1. Nominal Size: DN50~DN2800 / NPS 2”~48”; 2. Nominal pressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100 , Class150 3. Body material: WCB,ZG1Cr5Mo,ZG1Cr18Ni9Ti,CF8(304),CF3(304L),ZG1Cr18Ni12Mo2Ti,CF8M(316),CF3M(316L) 4. Connecting type: Wafer, Double flange, Lugged wafer, Butt Weld. 5. Application: Petroleum, Chemical industry, Metallurgy, Electric power, Food, Pharmacy Water supply and

WCB Wafer Style Resilient Seated Butterfly Valves DN200 PN16 Butterfly valves are quarter turn valves ideal for on/off operations as well as modulating flow. This valve is rated for 16 bar non-hazardous fluids and is operated by a hand wheel. Please note that the maximum pressure may deviate based on the medium type so carefully check the datasheet. The nominal diameter is 200 mm (8 inch) and is mounted to your system by an wafer type flange. The Cast iron (GGG40) housing

WCB Wafer Style Resilient Seated Butterfly Valves DN200 PN16 Design Features: Upper and Lower Bearings to maximize valve life Direct Mount 2”-12” standard with lever 14”and larger standard with gear Support shaft seal: bonding of elastomer to phenolic backing ring protects against distortion, a common cause of shaft leakage Integral ISO mounting pad for easy valve operation; no bracket needed One piece stem ensures dependability and positive disc positioning Available in

Cast Iron Lag Type Gear Operated Butterfly Valves 200 Psi 15 Mm To 300 Mm Lug-Style Butterfly Valve Lug-style butterfly valves are usually composed of metal such as ductile iron or steel. They feature threaded tapped lugs positioned on the valve flanges for bolt connections. Lug-style butterfly valves are suitable for end-of-line service but a blind flange is always recommended. Lug-style butterfly valves are manufactured to be compatible with either pneumatic or electric

2' 200 PSI Cast Iron Wafer Style Butterfly Valve Gear Operated Introduce Description WAFER STYLE Cast Iron Body 200 PSI 10 Position Lever Handle Gear Operator 2″ – 12″ One-Piece Valve Stem PTFE Stem Bushings Nickel Plated Ductile Iron Disc with BUNA-N Seat Plated Stud Bolt, Nut & Washer Sets Available (Wafer Style Only) Epoxy paiting suitable for drinking water applications. Short body flanged butterfly valves are the new “state of the art” butterfly valves available on the

DN50~DN1000 One Stem No-Pin Wafer Butterfly Valve SS316/SS416 Valve Design: API 609, MSS SP-67 Body Test :1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test. Seat Test :1.1 times the working pressure with water. Function / Operation Test :At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete

2~8" One Stem No-Pin Wafer Butterfly Valve SS316 Valve Design: API 609, MSS SP-67 Body Test :1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test. Seat Test :1.1 times the working pressure with water. Function / Operation Test :At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test

DN100 – DN4000/ 4"-160" Double Eccentric Double Flange Butterfly Valve BS EN593 EN12266 Double eccentric Butterfly Valve, rubber seated design, double flange, is applied in the water industry, municipal engineering, water conservancy project, drinking water engineering, and etc. Design standard: BS EN593 Face to face length : EN558-1/ISO5752 series 14& ISO5752 series 13 Flange dimension and drill : BS EN1092/BS4504 (DIN2501) Size: DN100 – DN4000/ 4"-160" Pressure rating:P

Wafer Butterfly Valve:Electric soft seal adjustment has simple structure, small volume, light weight.And only need to switch 90.It can be opened and closed quickly with simple operation. At the same time, the reading door has good fluid control characteristics.When the wafer type butterfly reading is in the fully open position, the butterfly plate thickness is the only resistance when the medium

Lugged Design, Tapped To Suit AS Table E Resilient Seated Butterfly Valve​ Water Authority approved Butterfly Valves. A fully lugged/tapped valve to AS4087 Class 16 (AS2129 Table “D”). The size range has been extended and we can now offer valves up to & including 20″ (DN500) *Approvals vary from State to State-check with us regarding acceptance by your local authority This model is available now and includes the following features: -Superior Coating (Nylon 11, 250 microns)

Lugged Design, Tapped To Suit AS Table E Resilient Seated Butterfly Valve​ General purpose, resilient seated Butterfly Valve, Lugged design, tapped to suit AS Table E, ductile iron body, 316SS disc, 316SS stem, EPT or NBR seat, 10-position notch plate & lever. Rated 16 bar Sizes- 1½” (DN40)→ 12″ (DN300) * Options: Various seats including viton, neoprene, EPDM, silicon, hypalon. 304SS or 410SS stem, Gear Operator, Nylon 11 coating, Lugged Ansi 150# or AS4087 Class 16 A

Connection AISI 316 PN 10-16, DN100 150LB Wafer butterfly valves General purpose, resilient seated Butterfly Valve, wafer design, 316SS body, 316SS disc, 316SS stem, EPDM seat, 10-position notch plate & lever (304SS). Rated 16 bar Sizes- 1½” (DN40)→ 12″ (DN300) * Options: Various seats includingNBR, viton, neoprene, EPT, silicon, hypalon. 304SS stem, WCB or 304SS Body, Gear Operator (304SS) A Butterfly valve is a quarter-turn rotary motion valve, that is used to stop,

Connection AISI 316 PN 10-16, DN100 150LB Wafer butterfly valves General purpose, resilient seated butterfly valve, wafer design (dual drilled Ansi 150/AS Table E), cast iron body, 316SS disc, 410SS stem, EPDM or NBR seat, gear operated. Rated up to 16 bar. Sizes- 14″ (DN350)→ 36″ (DN900) * Options: Various seats including viton, neoprene, EPT, silicon, hypalon. 316SS stem, Aluminium bronze or DI nylon coated disc, Ductile iron body A Butterfly valve is a quarter-turn rotary

Wafer Design Cast Iron Body (DI 8″-12″), 316SS Disc, 316SS Stem Seated Butterfly Valve General purpose, resilient seated Butterfly Valve, wafer design, cast iron body (DI 8″-12″), 316ss disc, 316ss stem, EPT, NBR or Viton seat, 10-position notch plate & lever-rated 16 bar. Sizes- 1½” (DN40)→ 12″ (DN300) * Options: Various seats including neoprene, EPDM, silicon, hypalon. 304 or 410ss stem, aluminium bronze or DI nylon coated disc, Ductile iron body, Undercut disc, Gear

Connection AISI 316 PN 10-16, DN100 150LB Wafer butterfly valves Article: 1400-1401 Suitable for flanges UNI EN 1092-2 PN 10, PN 16 and ANSI #150 Face to face length: EN 558-1 serie 20, DIN 3202 K1 Design EN 593 Installation: horizontal / vertical APPLICATIONS • Water supply • Waste water treatment plants • Fire fighting systems • Power plants • Industry • Drinking water • Irrigation • Heating – conditioning systems • * available disc in stainless steel (fig 1401) for salty

PN 16, ANSI #150 Double Flanged Centric Type Butterfly Valves Article: 401 Flanges: UNI EN 1092-2 PN 10 - 16, ANSI #150 Design: BS5155 Face to face length: EN 558-1 serie 13, DIN 3202 F16 Test to EN 12266 Installation: horizontal / vertical APPLICATIONS • Water supply • Waste water treatment plants • Fire fighting systems • Power plants • Industry • Drinking water • Irrigation • Heating – conditioning systems • * other versions available for different applications (please