Environmental Test Chambers

GJB150.5 B-OIL-02 PCB Test Chamber with Sanyo Stepper Motor, Silicone oil 【 Brief Introduction 】 PCB hot oil testing machine adopts domestic and foreign advanced technology and accessories manufacturing, reasonable design, easy to operate. The hot and cold circulation of the machine is realized by alternating the use of two independent fluid baths. The equipment is a testing instrument for the production process control of printed circuit board, which is used for the cold and

UV Aging Test Chamber Machine Lab SUS#304Stainless Steel Plate, -40℃-150℃ The fluorescent ultraviolet lamp is used as the light source in the test chamber. Through the simulation of ultraviolet radiation and condensation in natural sunlight, the accelerated weather resistance test is carried out on the material to obtain the results of the material weather resistance. It can simulate ultraviolet, rain, high temperature, high humidity, condensation, darkness and other

Programmable High-Precision Environmental Test Chamber Customizable Product Description: Environmental Test Chambers are specially designed for testing and controlling the environment of different products, materials and components. They provide a consistent and reliable simulated environment to help measure the performance of products and materials in different climates. Our Environmental Test Chambers are made of stainless steel with customizable chamber dimensions to fit

XB-OTS-IP65X Sand & Dust Test Equipment for IEC60529, IEC 60598, 0-3KPA Introduction: Sand Dust Test Equipment, large observation window with bright lights to keep the box, and use of tempered glass embedded heating element. Dust test chamber provides testing as per various iec 60529 for ip5x & ip6x. Combination of various testing cycles are available in a completely mono block construction. All settings can be done in an ergonomically designed control panel with accurate and

B-TH-48L ASTM Table Type Constant Temperature & Humidity Test Chamber Product Description: Temperature humidity test chamber is use to test material heat,cold,dry resistance, humidity resistance.Suitable for electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products. Small high and low temperature test box is used to examine and determine the adaptability of

ISO B-T-120(A~E) Rapid Temperature Test Chamber, 1℃-15℃／min, -70℃~180℃(100℃) Rapid temperature change test chamber refrigeration system and compressor: In order to ensure the cooling rate of the test chamber and the minimum temperature requirements, the test chamber uses a set of Taikang fully enclosed compressor composed of binary overlapping air cooling refrigeration system. The overlapping refrigeration system consists of a high temperature refrigeration cycle and a low

B-OIL-02 T-shaped Stainless Steel Plate PCB Test Chamber, -40℃-150℃ 【 Brief Introduction 】 PCB hot oil testing machine adopts domestic and foreign advanced technology and accessories manufacturing, reasonable design, easy to operate. The hot and cold circulation of the machine is realized by alternating the use of two independent fluid baths. The equipment is a testing instrument for the production process control of printed circuit board, which is used for the cold and hot

2-Box Temperature Shock Test Chamber with 3-Minutes Recovery Time Two-box temperature impact test box adopts upper and lower boxes (upper box high temperature, lower box low temperature). In the middle is blue extraction, which is the place where samples can be placed. Blue extraction switches up and down through the transmission device, and makes rapid conversion between high and low temperature two boxes, so as to realize temperature impact. The degree of tolerance under

UV Accelerated Weather Resistance Test Chamber -40℃-150℃, 290nm~400nm UV-A, UV-B, UV-C The fluorescent ultraviolet lamp is used as the light source in the test chamber. Through the simulation of ultraviolet radiation and condensation in natural sunlight, the accelerated weather resistance test is carried out on the material to obtain the results of the material weather resistance. It can simulate ultraviolet, rain, high temperature, high humidity, condensation, darkness and

Small High & Low Temperature Test Chamber with 20%-98% RH, 1KW~2KW Product Description: Small high and low temperature test box is used to examine and determine the adaptability of electrical and electronic products or materials in the temperature cycle change, the product surface produces high temperature or low temperature environment conditions storage and use. The equipment adopts forced air circulation to maintain the uniformity of temperature in the working room. In

Advanced Environmental Test Chambers - Thermal Shock & Vibration Product Description: Environmental Test Chambers provide a reliable and accurate testing environment for a wide variety of applications. With a temperature range of -70°C to +150°C, these chambers are designed to meet the most demanding testing requirements. In addition, the chambers are equipped with safety features such as over-temperature protection, over-pressure protection, and over-humidity protection to

High Temp Lab Equipment GB/T2423.2 , Custom Design, Precision Temp Control, 220V 50HZ Introduction: High Temperature Oven can provide a stable test space for preheating, drying, changes about physics and chemistry testing . It supplies precision temperature controller with high stability of platinum resistance to temperature that makes temperature well-distribution.Applications:Plastic Rubber Materials,Adhesive Tape,Food,Pharm,Daily-used chemical,etc. Advantages 1.Precision

B-TCT-401 Two-Box Temperature Impact Test Chamber: Fast 3min Recovery Two-box temperature impact test box adopts upper and lower boxes (upper box high temperature, lower box low temperature). In the middle is blue extraction, which is the place where samples can be placed. Blue extraction switches up and down through the transmission device, and makes rapid conversion between high and low temperature two boxes, so as to realize temperature impact. The degree of tolerance

SUS#304 Stainless Steel Plate PCB Hot Oil Test Chamber, -40℃-150℃ 【 Brief Introduction 】 PCB hot oil testing machine adopts domestic and foreign advanced technology and accessories manufacturing, reasonable design, easy to operate. The hot and cold circulation of the machine is realized by alternating the use of two independent fluid baths. The equipment is a testing instrument for the production process control of printed circuit board, which is used for the cold and hot

B-XD-800 Xenon Arc Lamp Aging Test Chamber RT+10-70℃, 50%~95%RH, 408L Product Use and Some Industry Testing Standards: Lixian Brand Xenon lamp aging test chamber is dedicated to the analysis and testing of rubber, plastic, paint, paint and other chemical materials, the main services: performance testing, aging testing, composition analysis, formula research and development.This section is mainly to list some of the test standards for the test of various industries reference.

B-TCT-401 Two-Box Temperature Impact Test Chamber with 3-Minute Recovery Time Two-box temperature impact test box adopts upper and lower boxes (upper box high temperature, lower box low temperature). In the middle is blue extraction, which is the place where samples can be placed. Blue extraction switches up and down through the transmission device, and makes rapid conversion between high and low temperature two boxes, so as to realize temperature impact. The degree of

Product Description:B-T-225L Environmental Test Chambers are designed to provide high stability and accuracy for controlling environmental conditions. It is ideal for testing a wide range of products in various industries such as aerospace, automotive, and medical. Our Environmental Test Chambers feature a temperature range from -70C to +150°C and a humidity range from 10% to 98% RH. It also features over-pressure protection, over-temperature protection, and over-humidity

Product Description:The Environmental Test Chambers, B-T-225L, are designed with high and low temperature, humidity, and pressure testing capabilities. The chamber construction is made of stainless steel for long term use. It features 20%-98% RH range and customizable chamber dimensions for various applications. The chambers also come with safety features such as over-temperature protection, over-pressure protection, and over-humidity protection, ensuring reliable and secure

Product Description:The B-T-225L Environmental Test Chamber is the perfect choice for testing and controlling relative humidity and temperature. It is designed to provide precise and reliable relative humidity and temperature control with an accuracy of ±2.5% RH and ±0.5°C. This chamber comes complete with a wide range of features and accessories, including a data logger, chart recorder, humidity generator, etc. to help you with your testing requirements. Additionally, this

Product Description:Environmental Test Chambers Environmental Test Chambers provide precise temperature control and stability for a variety of testing applications. This product offers a temperature range of -70C to +150°C with accuracy of ±0.5°C, ensuring high-quality results for your testing needs. It is equipped with advanced safety features, such as over-temperature protection, over-pressure protection, and over-humidity protection, to ensure a secure and reliable