Huawei DWDM

Contact Us Functions and Features The WSM9 board is mainly used to dynamically groom wavelengths, monitor online optical performance, and monitor alarms and performance events. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the WSM9 board Function and Feature Description Basic function Configures any wavelengths to any interfaces. A node on the ring or chain network can receive any wavelengths at the local station through any

Contact Us Functions and Features The M40 board performs wavelength multiplexing and supports in-service optical performance monitoring, and alarms and performance events monitoring. Table 1 describes the functions and features of the M40 board. Table 1 Functions and features of the M40 board Function and Feature Description Basic function Multiplexes a maximum of 40 wavelength signals into one multi-wavelength signal. M4001: multiplexes 40 C_EVEN wavelength signals into one

Contact Us Functions and Features The OAU1 is mainly used for gain adjustment, online optical performance monitoring, gain lock, and transient control. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the OAU1 board Function and Feature Description Basic function Amplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm. Supports the system to transmit services over different fiber spans without

Contact Us Functions and Features The WSD9 board dynamically grooms wavelengths. In addition to providing for in-service monitoring of optical performance, the WSD9 board supports alarm and performance event monitoring. Table 1 describes the functions and features of the WSD9 board. Table 1 Functions and features of the WSD9 board Function and Feature Description Basic function Dynamically drops wavelengths on ring or chain networks. This board can route any single wavelength

Contact Us Functions and Features The M40 board performs wavelength multiplexing and supports in-service optical performance monitoring, and alarms and performance events monitoring. Table 1 describes the functions and features of the M40 board. Table 1 Functions and features of the M40 board Function and Feature Description Basic function Multiplexes a maximum of 40 wavelength signals into one multi-wavelength signal. M4001: multiplexes 40 C_EVEN wavelength signals into one

Contact Us Functions and Features The G402/G404 board supports electrical cross-connections, OTN interfaces, and ESC communication. Table 1 describes the functions and features of the G402/G404 board when ports are used as tributary ports. Table 2 describes the functions and features of the G402/G404 board when ports are used as line ports (line mode). Table 3 describes the functions and features of the G402/G404 board when ports are used as line ports (relay mode). Table 1

Contact Us Functions and Features The DCU board compensates for the dispersion that is accumulated in the fiber during transmission and compresses optical signal pulse. This enables the transmitted optical signals to be restored at the output end. In addition, when used together with an optical amplifier board, the DCU board can implement long haul optical transmission. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the DCU board

Contact Us TN11LSX OSN6800 HUAWEI LSX TN11LSXRT02 TN11LSX TN12LSX TN13LSX TN14LSX 10GE optical transponder unitThe OptiX OSN 6800 applies to the aggregation layer or the backbone layer with average capacity. *360G ODUk (k=1,2,2e) cross-connection capacity. *180G GE or 360 10GE cross-connection capacity. *Max. wavelengths: 80 x 2.5G/10G/40G/100G(DWDM), 8 x 5G (CWDM) * Full service access over flexible shared 2.5G, 10G,40G, 100G channels * Non-block 2/4/9 degree ROADM *O&E

Contact Us Functions and Features The NS4 board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1 and Table 2. Table 1 Functions and features of the NS4 board (Line Mode) Function and feature Description Basic function NS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU41xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and

Contact Us Functions and FeaturesThe LSX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the LSX board Function and FeatureDescriptionBasic functionLSX converts signals as follows:1 x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2 1 x OTU21 x FC1200/10GE LAN/OTU2e 1 x OTU2eClient-side service type10GE LAN: Ethernet service at a rate of 10.31 Gbit/s10GE WAN:

Contact Us Functions and FeaturesThe TSC board is mainly used to achieve cross-connection at the electrical layer.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the TSC board Function and FeatureDescriptionBasic functionTSC converts signals as follows:1 x 100GE/OTU41 x ODU4Client-side service type100GE: Ethernet service at a rate of 103.125 Gbit/sOTU4: OTN service at a rate of 111.81 Gbit/sCross-connect capabilitiesSupports the cross

Contact Us Functions and Features The FIU board multiplexes and demultiplexes C-band wavelengths, and supports in-service monitoring of optical power performance. Table 1 describes the functions and features of the FIU board. Table 1 Functions and features of the FIU board Function and Feature Description Basic function Multiplexes the main channel signal and the OSC signal onto a single communications channel, and vice versa. In-service optical performance monitoring

Contact Us Functions and Features The LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1 and Table 2. Table 1 Functions and features of the LSC board Function and Feature Description Basic function LSC converts signal as follows: 1x 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function

Contact Us Functions and Features The LSX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LSX board Function and Feature Description Basic function LSX converts signals as follows: 1 x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2 1 x OTU2 1 x FC1200/10GE LAN/OTU2e 1 x OTU2e Client-side service type 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s

Contact Us Functions and Features The LTX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1 and Table 2. Table 1 Functions and features of the LTX board (OTU mode) Function and Feature Description Basic function LTX converts signal as follows: TN11LTX: 10x10GE LAN/10GE WAN/STM-64/OC-1921xOTU4 TN12LTX: 10x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2/OTU2e1x OTU4 TN15LTX/TN17LTX: 10x 10GE LAN/10GE

Contact Us Functions and Features The LOG board is mainly used to achieve tunable wavelengths, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LOG board Function and Feature Description Basic function LOG converts signals: 8 x GE 1 x OTU2 Client-side service type GE: Ethernet service at a rate of 1.25 Gbit/s NOTE: The TN12LOG board supports both GE electrical signal and GE optical signal. For

Contact Us Functions and Features The OAU1 is mainly used for gain adjustment, online optical performance monitoring, gain lock, and transient control. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the OAU1 board Function and Feature Description Basic function Amplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm. Supports the system to transmit services over different fiber spans without

Contact Us Functions and Features The TMX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the TMX board Function and Feature Description Basic function TMX converts signals as follows: 4x STM-16/OC-48/OTU11x OTU2 Client-side service type STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s OTU1: OTN service at a rate of 2.67 Gbit/s OTN function

Contact Us Functions and Features The LSX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LSX board Function and Feature Description Basic function LSX converts signals as follows: 1 x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2 1 x OTU2 1 x FC1200/10GE LAN/OTU2e 1 x OTU2e Client-side service type 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s

Contact Us Functions and Features The MR4 board is mainly used to add/drop and multiplex signals, to query wavelengths, and to provide a cascading interface. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the MR4 board Function and Feature Description Basic function Adds/drops and multiplexes four consecutive channels of signals to/from the multiplexed signals. WDM specification Supports the DWDM specifications. Cascading interface