Huawei DWDM

Contact Us Functions and FeaturesThe LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC.For detailed functions and features, see Table 1.Table 1 Functions and features of the LSC board Function and FeatureDescriptionBasic functionLSC converts signal as follows:100GE/OTU41x OTU4Client-side service type100GE: Ethernet service at a rate of 103.125 Gbit/s.OTU4: OTN service at a rate of 111.81 Gbit/sOTN functionProvides the OTU4 interface

Contact Us Functions and Features The LSCM board is mainly used to provide OTN interfaces and ESC. For detailed functions and features, see Table 1. Table 1 Functions and features of the LSCM board Function and Feature Description Basic function LSCM converts signal as follows: 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function Provides the OTU4 interface on WDM-side.

Contact Us Functions and Features The LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1 and Table 2. Table 1 Functions and features of the LSC board Function and Feature Description Basic function LSC converts signal as follows: 1x 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function

Contact Us Functions and Features The M40 board performs wavelength multiplexing and supports in-service optical performance monitoring, and alarms and performance events monitoring. Table 1 describes the functions and features of the M40 board. Table 1 Functions and features of the M40 board Function and Feature Description Basic function Multiplexes a maximum of 40 wavelength signals into one multi-wavelength signal. M4001: multiplexes 40 C_EVEN wavelength signals into one

Contact Us Functions and Features The NS2 board is used to achieve cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. NOTE: Only the OptiX OSN 8800 supports ODU0/ODUflex. Only the OptiX OSN 8800 and OptiX OSN 6800 support ODU2/ODU2e. Table 1 Functions and features of the NS2 board Function and feature Description Basic function NS2 converts signals as follows: TN11NS2: 4xODU11xOTU2 TN12NS2:

Contact Us Functions and FeaturesThe NS3 board is used at an electrical REG station to electrically regenerate one optical signal.Table 1 describes the functions and features of the NS3 board.Table 1 Functions and features of the NS3 board Function and featureDescriptionBasic functionElectrically regenerates one optical signal at an electrical REG station.Supported service rateOTU3: OTN service at a rate of 43.02 Gbit/sOTU3e: OTN service at a rate of 44.58 Gbit/sOTN

Contact Us Functions and Features The N401 board supports electrical cross-connections, OTN interfaces, and ESC communication. The N401 board can work in either line mode or relay mode. Table 1 and Table 2 describe the functions and features of the board. Table 1 Functions and features of the N401 board (line mode) Function and Feature Description Basic function Supports the following service conversions: 80xODU0/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU4/80xODUflex1xOTU4 The

Contact Us Functions and Features The XCS board cross-connect services at the electrical layer. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the XCS board Function and Feature Description Basic function Implements grooming of services. Cross-connect function TN11XCS: Supports the integrated grooming of ODU1 signals or ODU2/ODU2e signals or GE services or 10GE services. Supports a maximum cross-connect and grooming capacity of 280

Contact Us Functions and Features The SLD64 board receives and transmits 2xSTM-64 optical signals, processes overhead bytes, and performs the MSP protection. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the SLD64 board Function and Feature Description Basic functions Transmits and receives 2xSTM-64 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces, namely, the I-64.1 and

Contact Us Functions and Features The GS4 board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the GS4 board Function and feature Description Basic function GS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU41xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and ODU3 signals. Line-side

Contact Us Functions and Features The U401 board supports the mixed transmission of OTN, SDH and packet services. It supports Layer 2 switching, MPLS-TP, and OTN interfaces. The U401 board can work in either line mode or relay mode. The board supports ODUk, packet services and VC-4 services only when it works in line mode. Table 1 Basic function of the U401board Board Mode Input signal Basic function More information Line Mode OTN 80xODU0/40xODU1/10xODU2/ 10xODU2e/2xODU3

Contact Us Functions and Features The NPO2E provides functions and features such as OTN interfaces and ESC. Table 1 provides the details about the functions and features of the NPO2E. Table 1 Functions and features of the NPO2E Function and Feature Description Basic function 64 x ODU0/32 x ODU1/8 x ODU28 x OTU2 8 x ODU2e8 x OTU2e Accesses four channels of OTU2/OTU2e signals from the ENQ2 board, and converts the signals into the standard DWDM wavelengths compliant with ITU-T G

Contact Us Functions and Features The FIU board multiplexes and demultiplexes signals, and monitors performance of optical signals. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the FIU Function and Feature Description Basic function Multiplexes and demultiplexes extended C-band signals transmitted along the main path and optical supervisory channel. Online optical performance monitoring Provides an in-service monitoring port (MON).

Contact Us Functions and Features The TMX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the TMX board Function and Feature Description Basic function TMX converts signals as follows: 4x STM-16/OC-48/OTU11x OTU2 Client-side service type STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s OTU1: OTN service at a rate of 2.67 Gbit/s OTN function

Contact Us Functions and Features The NS4 board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1 and Table 2. Table 1 Functions and features of the NS4 board (Line Mode) Function and feature Description Basic function NS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU41xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and

Contact Us Functions and Features The NQ2 board carries out cross-connection at the electrical layer, and provides the OTN interfaces and ESC. For detailed functions and features, refer to Table 1 and Table 2. NOTE: Only the OptiX OSN 8800 supports ODU0/ODUflex. Table 1 Functions and features of the NQ2 board (Line Mode) Function and feature Description Basic function NQ2 converts signals as follows: TN51NQ2: 16xODU1/4xODU24xOTU2 4xODU2e4xOTU2e TN52NQ2/TN54NQ2: 32xODU0

Contact Us Functions and Features The TD20 board performs the colorless drop function. It drops a maximum of 20 optical signals that are carried over different wavelengths, compensates for broadcast loss, and supports online monitoring of optical power, alarms, and performance. Table 1 lists the functions and features of the TD20 board. Table 1 Functions and features of the TD20 board Function and Feature Description Basic function Demultiplexes a multi-wavelength signal into

Contact Us Functions and Features This section describes the functions and features of AUX boards. For detailed functions and features of the TN11AUX/TN12AUX board, refer to Table 1. Table 1 Functions and features of the TN11AUX/TN12AUX board Function and Feature Description Basic function Provides the system with various auxiliary interfaces and management interfaces. Interface Provides the Ethernet communications interface and management interface. Provides the common and

Contact Us Functions and Features The LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1. Table 1 Functions and features of the LSC board Function and Feature Description Basic function LSC converts signal as follows: 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function Provides the

Contact Us Functions and Features The SXH board is mainly used to cross-connect services at the electrical layer. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the SXH board Function and Feature Description Basic function Grooms services. Cross-connect function Supports a maximum of 1.28 Tbit/s VC-4 cross-connect grooming. Supports a maximum of 2.56 Tbit/s ODUk (k = 0, 1, 2, 2e, 3 or flex) cross-connect grooming when the SXH board is