Huawei DWDM

Contact Us Functions and FeaturesThe T404 board supports electrical cross-connections, OTN interfaces.Table 1 describes the functions and features of the T404.Table 1 Functions and features of the T404 board Function and FeatureDescriptionBasic functionsSupports the following service conversions:4x100GE(Bit Transparent Mapping/(MAC Transparent Mapping))4xODU44x100GE(MAC Transparent Mapping)4xODUflex4xOTU44xODU4NOTE:Only the TNV3T404 board supports 100GE(MAC Transparent

Contact Us Functions and Features The NS4 board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1 and Table 2. Table 1 Functions and features of the NS4 board (Line Mode) Function and feature Description Basic function NS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU41xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and

Contact Us Functions and Features The EC116 provides sixteen channelized STM-1 interfaces and supports CES/CEP services.The EC404 provides four channelized STM-4 interfaces and supports CES/CEP services. Table 1 lists differences regarding the functions and features of EC116/EC404 boards. Table 1 Differences regarding functions and features Function and Feature Supported service Port working mode EC116 Sixteen channelized STM-1 interfaces STM-1 interface inloop STM-1

Contact Us Functions and FeaturesThe OAU1 is mainly used for gain adjustment, online optical performance monitoring, gain lock, and transient control.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the OAU1 board Function and FeatureDescriptionBasic functionAmplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm.Supports the system to transmit services over different fiber spans without

Contact Us Functions and Features The NPO2E provides functions and features such as OTN interfaces and ESC. Table 1 provides the details about the functions and features of the NPO2E. Table 1 Functions and features of the NPO2E Function and Feature Description Basic function 64 x ODU0/32 x ODU1/8 x ODU28 x OTU2 8 x ODU2e8 x OTU2e Accesses four channels of OTU2/OTU2e signals from the ENQ2 board, and converts the signals into the standard DWDM wavelengths compliant with ITU-T G

Contact Us Functions and Features The SLQ16 board receives and transmits 4xSTM-16 optical signals, processes overhead bytes, and performs the MSP. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the SLQ16 board Function and Feature Description Basic functions Transmits and receives 4xSTM-16 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1,

Contact Us Functions and Features The MR8V board is mainly used to add/drop signals, to query wavelengths, and to provide a cascading interface. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the MR8V board Function and Feature Description Basic function Adds/drops and multiplexes eight channels of signals to/from the multiplexed signals and adjusts the multiplexed input optical power of WDM-side signal and the input optical power of

Contact Us Functions and FeaturesThe TOX board enables cross-connections at the electrical layer.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the TOX board Function and FeatureDescriptionBasic functionTOX converts signals as follows:8 x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2/FC8008 x ODU28 x 10GE LAN/OTU2e/FC12008 x ODU2e8 x FC8008 x ODUflexClient-side service typeSTM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s10GE LAN:

Contact Us Functions and Features The TN16UXCM board is mainly used to cross-connect services at the electrical layer, system control function and clock function.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the TN16UXCM board Function and FeatureDescriptionCross-connect functionSupports non-blocking full cross-connections of 1.6 Tbit/s ODUk (k = 0, 1, 2, 2e, 3, 4, or flex).Supports cross-connections of 20 Gbit/s VC-12/VC-3 services

Contact Us Functions and Features The MR4 board is mainly used to add/drop and multiplex signals, to query wavelengths, and to provide a cascading interface. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the MR4 board Function and Feature Description Basic function Adds/drops and multiplexes four consecutive channels of signals to/from the multiplexed signals. WDM specification Supports the DWDM specifications. Cascading interface

Contact Us Functions and Features The N401 board supports electrical cross-connections, OTN interfaces, and ESC communication. The N401 board can work in either line mode or relay mode. Table 1 and Table 2 describe the functions and features of the board. Table 1 Functions and features of the N401 board (line mode) Function and Feature Description Basic function Supports the following service conversions: 80xODU0/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU4/80xODUflex1xOTU4 The

Contact Us Version Description The available functional versions of the ND2 board are TN11, TN12, TN52, and TN53. Mappings Between the Board and Equipment The following provides the board(s) supported by the product. However, the availability of the board(s) is subject to PCNs. For PCN information, contact the product manager at your local office. Board Initial Versiona General 8800 T64 Subrack Enhanced 8800 T64 Subrack General 8800 T32 Subrack Enhanced 8800 T32 Subrack 8800

Contact Us Functions and FeaturesThe RAU2 board is mainly used for gain adjustment, online optical performance monitoring, gain lock, and transient control.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the RAU2 board Function and FeatureDescriptionBasic functionIntegrates a backward Raman unit and an EDFA unit and amplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm.Supports the system to

Contact Us Functions and Features The NS4 board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1 and Table 2. Table 1 Functions and features of the NS4 board (Line Mode) Function and feature Description Basic function NS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU41xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and

Contact Us Functions and Features The TQX board enables cross-connections at the electrical layer. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the TQX board Function and Feature Description Basic function TQX converts signals as follows: 4xFC800/10GE LAN/10GE WAN/STM-64/OC-192/OTU24xODU2 4xFC1200/10GE LAN/OTU2e4xODU2e. 4xFC8004xODUflex Client-side service type STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s 10GE LAN:

Contact Us Functions and Features The NQ2 board carries out cross-connection at the electrical layer, and provides the OTN interfaces and ESC. For detailed functions and features, refer to Table 1 and Table 2. NOTE: Only the OptiX OSN 8800 supports ODU0/ODUflex. Table 1 Functions and features of the NQ2 board (Line Mode) Function and feature Description Basic function NQ2 converts signals as follows: TN51NQ2: 16xODU1/4xODU24xOTU2 4xODU2e4xOTU2e TN52NQ2/TN54NQ2: 32xODU0

Contact Us Functions and Features The V1T210 board supports electrical cross-connections, OTN interfaces, and ESC communication. Table 1 describes the functions and features of the V1T210 board. Table 1 Functions and features of the V1T210 board Function and Feature Description Basic function Supports the following service conversions: 10x10GE LAN/10GE WAN/STM-64/OC-192/OTU2/FC800/FICON8G10xODU2 10x10GE LAN/OTU2e/FC120010xODU2e 10xFC800/FICON8G10xODUflex Client-side service

Contact Us Functions and Features The OAU1 is mainly used for gain adjustment, online optical performance monitoring, gain lock, and transient control. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the OAU1 board Function and Feature Description Basic function Amplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm. Supports the system to transmit services over different fiber spans without

Contact Us Functions and Features The M40 board is mainly used to multiplex signals, monitor performance of optical signals, and monitor alarms and performance events. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the M40 board Function and Feature Description Basic function Multiplexes a maximum of 40 channels of signals into one channel of multiplexed signals. M4001: multiplexes 40 C_EVEN wavelength signals into one multi

Contact Us Functions and Features The LSCM board is mainly used to provide OTN interfaces and ESC. For detailed functions and features, see Table 1. Table 1 Functions and features of the LSCM board Function and Feature Description Basic function LSCM converts signal as follows: 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function Provides the OTU4 interface on WDM-side.