Huawei DWDM

Contact Us Functions and Features The LOM board is mainly used to achieve tunable wavelength, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LOM board Function and Feature Description Basic function LOM converts signals as follows: 8 x GE/FC100/FICON/ISC 1G 1 x OTU2 4 x FC200/FICON Express/ISC 2G 1 x OTU2 2 x FC400/FICON4G 1 x OTU2 Supports hybrid transmission of the services mentioned above.

Contact Us Functions and Features The MR8 board is mainly used to add/drop and multiplex signals, to query wavelengths, and to provide a cascading interface. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the MR8 board Function and Feature Description Basic function Adds/drops and multiplexes eight channels of signals to/from the multiplexed signals. WDM specification Supports the DWDM specifications. Cascading interface Provides the

Contact Us Functions and FeaturesThe FIU board multiplexes and demultiplexes signals, and monitors performance of optical signals.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the FIU Function and FeatureDescriptionBasic functionMultiplexes and demultiplexes signals transmitted along the main path and optical supervisory channel.Online optical performance monitoringProvides an in-service monitoring port (MON). This port connects to an

Contact Us Functions and Features The M40V board is mainly used to multiplex signals, monitor performance of optical signals, monitor alarms and performance events, and adjust optical power. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the M40V board Function and Feature Description Basic function Multiplexes a maximum of 40 signals into one multiplexed signal and adjusts the input optical power of each channel. M40V01: multiplexes

Contact Us Functions and Features The TQX board enables cross-connections at the electrical layer. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the TQX board Function and Feature Description Basic function TQX converts signals as follows: 4xFC800/10GE LAN/10GE WAN/STM-64/OC-192/OTU24xODU2 4xFC1200/10GE LAN/OTU2e4xODU2e. 4xFC8004xODUflex Client-side service type STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s 10GE LAN:

Contact Us Functions and Features The OLP board provides optical line protection, intra-board 1+1 protection and client-side 1+1 protection. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the OLP board Function and Feature Description Basic function Provides the optical line protection to ensure the normal receiving of signals when the line fiber fails. Provides intra-board 1+1 protection to protect the services of the OTU that has no

Contact Us Functions and Features The LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1 and Table 2. Table 1 Functions and features of the LSC board Function and Feature Description Basic function LSC converts signal as follows: 1x 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function

Contact Us Functions and Features The main functions and features supported by the ASE are generating dummy light, online optical performance monitoring, alarms and performance events monitoring. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the ASE Function and Feature Description Basic function Generate dummy light. The total wavelengths range from 1528.8 nm to 1567.6 nm. Online optical performance monitoring Provides an in-service

Contact Us Functions and FeaturesThe LOA board supports functions and features such as wavelength tunable, OTN functions, and ESC.For detailed functions and features, refer to Table 1.Table 1 Functions and features of the LOA board Function and FeatureDescriptionBasic functionLOA converts signals as follows:8 x (125 Mbit/s to 1.25 Gbit/s signals) 1 x OTU24 x (1.49 Gbit/s to 2.67 Gbit/s signals) 1 x OTU24 x OTU1 1 x OTU22 x 3G-SDI/3G-SDIRBR/FC400/FICON4G/Infiniband 2.5G 1 x

Contact Us Functions and Features The LSX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LSX board Function and Feature Description Basic function LSX converts signals as follows: 1 x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2 1 x OTU2 1 x FC1200/10GE LAN/OTU2e 1 x OTU2e Client-side service type 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s

Contact Us Functions and FeaturesThe T220E board supports electrical cross-connections,OTN interfaces and L2 layer switching and the QinQ function.Table 1 and Table 2 describe the functions and features of the T220E board.Table 1 OTN functions and features of the T220E board Function and FeatureDescriptionBasic functionWhen the port used as tributary Port, Supports the following service conversions: ODU0 non-convergence mode (GE(TTT-GMP)/GE (GFP-T)->ODU0). 20 x GE(TTT-GMP)/GE

Contact Us Functions and Features The NS3 board is used at an electrical REG station to electrically regenerate one optical signal. Table 1 describes the functions and features of the NS3 board. Table 1 Functions and features of the NS3 board Function and feature Description Basic function Electrically regenerates one optical signal at an electrical REG station. Supported service rate OTU3: OTN service at a rate of 43.02 Gbit/s OTU3e: OTN service at a rate of 44.58 Gbit/s OTN

Contact Us Functions and Features The MR4 board is mainly used to add/drop and multiplex signals, to query wavelengths, and to provide a cascading interface. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the MR4 board Function and Feature Description Basic function Adds/drops and multiplexes four consecutive channels of signals to/from the multiplexed signals. WDM specification Supports the DWDM specifications. Cascading interface

Contact Us Functions and FeaturesThe T402 board supports electrical cross-connections, OTN interfaces, and ESC communication.Table 1 describes the functions and features of the T402.Table 1 Functions and features of the T402 board Function and FeatureDescriptionBasic functionsSupports the following service conversions:TNV1T402C01 board: 2x100GE(Bit Transparent Mapping)2xODU42xOTU42xODU4TNV1T402C11 board: 2x100GE(Bit Transparent Mapping)2xODU4TNV3T402C21 board: 2x100GE(Bit

Contact Us Functions and Features The OLP board provides optical line protection, intra-board 1+1 protection and client-side 1+1 protection. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the OLP board Function and Feature Description Basic function Provides the optical line protection to ensure the normal receiving of signals when the line fiber fails. Provides intra-board 1+1 protection to protect the services of the OTU that has no

Contact Us Functions and Features The FIU board multiplexes and demultiplexes C-band wavelengths, and supports in-service monitoring of optical power performance. Table 1 describes the functions and features of the FIU board. Table 1 Functions and features of the FIU board Function and Feature Description Basic function Multiplexes the main channel signal and the OSC signal onto a single communications channel, and vice versa. In-service optical performance monitoring

Contact Us Functions and Features The WSMD4 board is mainly used to broadcast services, dynamically groom wavelengths, monitor online optical performance monitoring, and monitor alarms and performance events. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the WSMD4 board Function and Feature Description Basic function Provides service broadcasting function, and supports the function of configurable multiplexing any wavelengths. Any

Contact Us Functions and FeaturesThe LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC.For detailed functions and features, see Table 1.Table 1 Functions and features of the LSC board Function and FeatureDescriptionBasic functionLSC converts signal as follows:100GE/OTU41x OTU4Client-side service type100GE: Ethernet service at a rate of 103.125 Gbit/s.OTU4: OTN service at a rate of 111.81 Gbit/sOTN functionProvides the OTU4 interface

Contact Us Functions and Features The STG board is mainly used to lock the reference clock source and provide signals and frame signals to the system. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the STG board Function and Feature Description Basic function Locks the reference clock source. Provides the system with ITU-T clock signals that comply with G.813 and G.823 and frame signals. Synchronizes the time of an NE with the time of

Contact Us Functions and Features The XCS board cross-connect services at the electrical layer. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the XCS board Function and Feature Description Basic function Implements grooming of services. Cross-connect function TN11XCS: Supports the integrated grooming of ODU1 signals or ODU2/ODU2e signals or GE services or 10GE services. Supports a maximum cross-connect and grooming capacity of 280