Huawei DWDM

Contact Us Functions and Features The LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1. Table 1 Functions and features of the LSC board Function and Feature Description Basic function LSC converts signal as follows: 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function Provides the

Contact Us Functions and Features The M48V board is mainly used to multiplex signals, monitor performance of optical signals, monitor alarms and performance events, and adjust optical power. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the M48V board Function and Feature Description Basic function Supports the extended C-band wavelength signals, multiplexes a maximum of 48 signals into one multiplexed signal and adjusts the input

Contact Us Version Description The available functional versions of the ND2 board are TN11, TN12, TN52, and TN53. Mappings Between the Board and Equipment The following provides the board(s) supported by the product. However, the availability of the board(s) is subject to PCNs. For PCN information, contact the product manager at your local office. Board Initial Versiona General 8800 T64 Subrack Enhanced 8800 T64 Subrack General 8800 T32 Subrack Enhanced 8800 T32 Subrack 8800

Contact Us Functions and Features The WSM9 board dynamically grooms wavelengths and supports in-service monitoring of optical performance, and alarms and performance events monitoring. Table 1 describes the functions and features of the WSM9 board. Table 1 Functions and features of the WSM9 board Function and Feature Description Basic function Dynamically adds wavelengths on ring or chain networks. This board can add any single wavelength or any wavelength combination through

Contact Us Functions and Features The NS4 board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1 and Table 2. Table 1 Functions and features of the NS4 board (Line Mode) Function and feature Description Basic function NS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU41xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and

Contact Us Functions and Features The MR8V board is mainly used to add/drop signals, to query wavelengths, and to provide a cascading interface. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the MR8V board Function and Feature Description Basic function Adds/drops and multiplexes eight channels of signals to/from the multiplexed signals and adjusts the multiplexed input optical power of WDM-side signal and the input optical power of

Contact Us Functions and Features The U401 board supports the mixed transmission of OTN, SDH and packet services. It supports Layer 2 switching, MPLS-TP, and OTN interfaces. The U401 board can work in either line mode or relay mode. The board supports ODUk, packet services and VC-4 services only when it works in line mode. Table 1 Basic function of the U401board Board Mode Input signal Basic function More information Line Mode OTN 80xODU0/40xODU1/10xODU2/ 10xODU2e/2xODU3

Contact Us Functions and Features The LSXL board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LSXL board Function and Feature Description Basic function LSXL converts signals as follows: 1x STM-256/OC-768/OTU31x OTU3 Client-side service type STM-256/OC-768: SDH/SONET service at a rate of 39.81 Gbit/s OTU3: OTN service at a rate of 43.02 Gbit/s

Contact Us Functions and Features The LOG board is mainly used to achieve tunable wavelengths, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LOG board Function and Feature Description Basic function LOG converts signals: 8 x GE 1 x OTU2 Client-side service type GE: Ethernet service at a rate of 1.25 Gbit/s NOTE: The TN12LOG board supports both GE electrical signal and GE optical signal. For

Contact Us Functions and FeaturesThe RDU9 board is used to dynamically groom wavelengths. It supports in-service optical performance, and alarms and performance events monitoring.Table 1 describes the functions and features of the RDU9 board.Table 1 Functions and features of the RDU9 board Function and FeatureDescriptionBasic functionBroadcasts the main channel signal in nine directions at the same time.WDM specificationSupports the DWDM specification.Spectrum applicationOnly

Contact Us Functions and Features The LSX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the LSX board Function and Feature Description Basic function LSX converts signals as follows: 1 x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2 1 x OTU2 1 x FC1200/10GE LAN/OTU2e 1 x OTU2e Client-side service type 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s

Contact Us Functions and Features E124/E208/E212/E302/E401 board supports GE/10GE/40GE/100GE services and implements L2 processing to the services. It supports functions and features such as Layer 2 switching and Multiprotocol Label Switching (MPLS). Table 1 lists differences regarding the functions and features of E124/E208/E212/E302/E401 boards. Table 1 Differences regarding functions and features Function and Feature Supported service Port working mode TNV1E124 24 x GE/FE

Contact Us Functions and FeaturesThe CTU board implements system communication, provides a clock source for system communication, and supports 1+1 redundancy (active/standby backup).Table 1 describes the functions and features of the CTU board.Table 1 Functions and features of the CTU board Function and FeatureDescriptionBasic functionManages NE configurations and offers NE alarm outputs.Supports the backup of NE data. When the NE data changes, the real-time database backup

Contact Us Functions and Features The OBU1 board is mainly used for online optical performance monitoring, gain lock, and transient control. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the OBU1 board Function and Feature Description Basic function Amplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm. Supports the system to transmit services over different fiber spans without electrical

Contact Us Functions and Features The M40V board is mainly used to multiplex signals, monitor performance of optical signals, monitor alarms and performance events, and adjust optical power. For detailed functions and features, refer to Table 1. Table 1 Functions and features of the M40V board Function and Feature Description Basic function Multiplexes a maximum of 40 signals into one multiplexed signal and adjusts the input optical power of each channel. M40V01: multiplexes

Contact Us Functions and Features The LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1. Table 1 Functions and features of the LSC board Function and Feature Description Basic function LSC converts signal as follows: 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function Provides the

Contact Us Functions and Features The LSC board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC. For detailed functions and features, see Table 1. Table 1 Functions and features of the LSC board Function and Feature Description Basic function LSC converts signal as follows: 100GE/OTU41x OTU4 Client-side service type 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s OTN function Provides the

Contact Us Functions and Features The NS2 board is used to achieve cross-connection at the electrical layer, and to provide OTN interfaces and ESC. For detailed functions and features, refer to Table 1. NOTE: Only the OptiX OSN 8800 supports ODU0/ODUflex. Only the OptiX OSN 8800 and OptiX OSN 6800 support ODU2/ODU2e. Table 1 Functions and features of the NS2 board Function and feature Description Basic function NS2 converts signals as follows: TN11NS2: 4xODU11xOTU2 TN12NS2:

Contact Us Functions and Features The M40 board performs wavelength multiplexing and supports in-service optical performance monitoring, and alarms and performance events monitoring. Table 1 describes the functions and features of the M40 board. Table 1 Functions and features of the M40 board Function and Feature Description Basic function Multiplexes a maximum of 40 wavelength signals into one multi-wavelength signal. M4001: multiplexes 40 C_EVEN wavelength signals into one

Contact Us Functions and FeaturesThe LDX board provides OTN interfaces and electrical supervisory channels (ESCs).For detailed functions and features, refer to Table 1.Table 1 Functions and features of the LDX board Function and FeatureDescriptionBasic functionLDX converts signals as follows:2 x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2 2 x OTU22 x 10GE LAN/OTU2e 2 x OTU2eClient-side service type10GE LAN: Ethernet service at a rate of 10.31 Gbit/s10GE WAN: Ethernet service at a