Huawei Access Network

Contact Us 03029283 Optix OSN 3500 SSN2DCU (40km,LC,3dB) DCU 40 single way dispersion compensation board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards Highly reliable design 1+1

ZTE PMON UNIT for ZTE ZXJ10 ZXJ10B PSTN Contact Us Central module (CM): located at the central position in networking, and connected with peripheral switching modules (simplified as PSM ) and remote switching modules (simplified as RSM). Central Module(CM) There are three types of ZXJ10 CMs: Small capacity: SM8; SM16 Medium capacity: CM32; CM64 Large capacity: CM128; CM256. Central Module SM8 Dimensions: 2000mm*870mm*600mm (H) Weight: 250kg (a single rack with full configurat

W2PSA0580 580W AC Power Module Contact Us Product Feature 580 W AC PoE Power ModuleProduct Support Table 1 lists the switch models supporting a 580 W AC PoE power module. Table 1 Product support for a 580 W AC PoE power module Power Module Name Product Support W2PSA0580 S5710-52C-PWR-EI, S5710-28C-PWR-EI-AC, S5710-52C-PWR-EI-AC, S5720-56C-PWR-HI-AC1 S6720-32C-PWH-SI-AC, S6720-32C-PWH-SI, S6720-56C-PWH-SI-AC, S6720-56C-PWH-SI Appearance Figure 1 Appearance of the 580 W AC PoE

Contact Us 03030AMX SSQ2CXL16 (S-16.1,LC) Q2CXL16 Optical transmission system OSN 1500 CXL16 • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the

ZTE J10 B-type aircraft ASIG-2 ASIG-3 COMM MP POWER A BContact Us Central module (CM): located at the central position in networking, and connected with peripheral switching modules (simplified as PSM ) and remote switching modules (simplified as RSM).Central Module(CM)There are three types of ZXJ10 CMs:Small capacity: SM8; SM16Medium capacity: CM32; CM64Large capacity: CM128; CM256.Central Module SM8Dimensions: 2000mm*870mm*600mm (H)Weight: 250kg (a single rack with full

ZTE C220 GCSA optical terminal ZXA10 C220 OLT Card Contact Us With the social development in recent years, service demands are ever increasing. Multi-services need more bandwidth for access network. The FTTX solution bases on xPON technology complies with the access network topology features with small-size passive ODN, and excellent adaptability, without electromagnetic and lightning interference to reduce the equipment fault ratio. The distance that is longer than 20 km

ZTE 9806H ZTE ZXDSL 9806H ZTE PWDHE ZTE PWDH -48V DC power module Contact Us In regarding of increasing TCO, carriers have been reviewing the value of legacy infrastructure, that is, copper. Copper technology continues to be under development, and provides FTTH-like bandwidth without extra investment in last mile. ZXDSL 9806H, a 2U-heigh copper-based integrated access box, is customized for carriers, provide copper-based high-speed access, realizing rapid network roll-out,

Contact Us Functions and Features An HUNS3 board receives mixed signals of STM-16/STM-64/GE/nGE/10GEservices with the total bandwidth not larger than 40 Gbit/s from the backplane, encapsulates them into ODU0/ODU1/ODUflex/ODU2/ODU3/OTU3 units, and transmits them out through an optical port. Table 1, Table 2, and Table 3 list the functions and features supported by HUNS3 boards. Table 1 Overall functions and features supported by HUNS3 boards Function and Feature Description

Contact Us Functions and Features EX2 boards process and forward 2x10GE services and support QoS functions such as traffic management, congestion control, and scheduling. Table 1 lists the functions and features supported by EX2 boards. Table 1 Functions and features supported by EX2 boards Function and Feature Description Basic functions Provides two 10GE optical ports to transmit/receive and process 2x10GE services. Port types Supports 10GBASE-LR (LAN), 10GBASE-ER (LAN),

ZTE PSN4V 40G H0101PSN4V_040202-R5 ZXJ10 RNC SDTB CLKG VTCD RDTB SVR Contact Us Central module (CM): located at the central position in networking, and connected with peripheral switching modules (simplified as PSM ) and remote switching modules (simplified as RSM). Central Module(CM) There are three types of ZXJ10 CMs: Small capacity: SM8; SM16 Medium capacity: CM32; CM64 Large capacity: CM128; CM256. Central Module SM8 Dimensions: 2000mm*870mm*600mm (H) Weight: 250kg (a

Contact Us Functions and Features EFS4 boards support the Layer 2 switching, MPLS, and broadcast functions. Table 1 lists the functions and features supported by EFS4 boards. Table 1 Functions and features supported by EFS4 boards Function and Feature Description Basic functions Processes 4xFE services. Port types Supports 10BASE-T/100BASE-TX signals. The optical ports comply with IEEE 802.3u. Functions when being used with an interface board Provides ports on the front panel

Contact Us Functions and Features The CO1 receives eight channels of channelized STM-1 CES services and works with the EG8 to process the received services. Table 1 provides the functions and features of the CO1. Table 1 Functions and features of the CO1 board Function and Feature Description Basic functions Provides eight channelized STM-1 optical interfaces and works with an EG8 board to process fractional E1 services and 64 kbit/s CES services. Interface types Supports

EPFD 16 Ports EPON OLT EPFD EPON Board Contact Us GPON OLT aggregates various terminals and provides high-density ports, which can reduce network nodes, sites, and equipment rooms to simplify network architecture, reduce device investment and O&M costs, and improve network deployment efficiency. PON/10G PON/TWDM PON in the same platform can help carriers carry out smooth network evolution and protect their investments. Building a network that supports unified access for home,

SL4 SL4A SS27SL4A SS28SL4A SS29SL4A SS27SL4 SS29SL4 optical interface board for Metro 2050 Metro2050 Metro2050 OptiX Metro2050 optical transmission boards: S0010353 OptiX 155/622 (Metro2050)S1011793 masterS1011783 system board03031405 SS13SCC0 MPU03036601 SS13GTC01 cross plate (no crystal, 24mm)03032779 SS14STG01 clock board03031909 SS32OHP01 overhead processing board (24mm)S1011786 STM-4 optical interface board03034419 SS27SL4A (S-4.1 SC 32) STM-4 optical interface board (S

Huawei MPLC Control Board H901MPLCContact Us Product Feature H901MPLB Board DescriptionThe H901MPLB board is a control board. It is the core of the system control and service switching and aggregation. The H901MPLB board can also function as the management and control core of the integrated network management system (NMS). It communicates with service boards about the key management and control information through the master/slave serial port and inband GE/10GE channel. In

OI4 OI4D SS48OI4 SS48OI402-S4.1 SS44OI4 SS48OI4D SS48OI4DA OI402 OI4DA optical interface board for Metro 1000 The OptiX Metro 1000, a type of STM-1/STM-4/STM-16 case-shaped equipment, was developed by to enable access for multiple types of services. It can be used at the access layer of Metropolitan Area Networks (MANs) and local transmission networks to access VIP private lines, wireless base stations, and Digital Subscriber Line Access Multiplexers (DSLAMs). Features High

SD4 SS63SD4 SS63SD401-S4.1 for OptiX 2500 Metro 3000 Metro3000 OptiX 2500 + (Metro3000) STM-16 MADM / MSTP optical transmission system (hereinafter referred to as the OptiX 2500 +) device is a multi-service transport platform (MSTP) equipment. The device is the SDH / ATM / Ethernet / DWDM technology integration; it not only has SDH equipment and flexible networking and service scheduling capability (MADM), but also can through 2-layers’ data services, achieve ATM / Ethernet

Contact Us Functions and Features The DCU can compensate for the dispersion for a maximum of two channels of optical signals. The DCU can be used with the BA and PA. Table 1 provides the functions and features of the DCU. Table 1 Functions and features of the DCU Function and Feature N1DCU N2DCU Basic functions Compensates for the dispersion of a maximum of two channels of optical signals at the same time. Supports the compensated dispersion of 1020 ps/nm (for the dispersion

ZXA10 C300 ZTEContact Us ZXA10 C300 is aconvergent optical-access platform with large capacity and high density. Numerous access approaches are supported and the triple-play services can be realized. The customized scenarios are provided for various networks demands. ZXA10 C300 won the InfoVision Green Broadband Award at Broadband World Forum Europe (BBWF Europe) in 2010. ZTE OLT ZXA10 C300 GPON Big-capacity Basic Cofiguration (2 SCXM+2 PRWG + 2GUFQ +1GTGO) ZXA10 C300 is a