Huawei Optical Transceiver

Contact Us Functions and Features The SL16A receives and transmits 1xSTM-16 optical signals, processes overhead bytes, and performs the MSP. Table 1 describes the functions and features of the SL16A. Table 1 Functions and features of the SL16A Function and Feature Description Basic functions Transmits and receives 1xSTM-16 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1, and L

Contact Us 02113256 02113268 02113269 02113270 SDH device OSN3500 SSNB9RACK05 SSNB9RACK007 SSNB9RACK008 SSNB9RACK009 RACK N63E N66T Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards

Contact Us 03054593 OSN 1500 SSN3EGS219 EGS219 N3EGS219 2xGE switching and processing board(1000BASE-T (RJ45) SFP) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.comwww.uonel-telecom.com Specifications Item Description Part Number 02310CRM Version Support Supported in V100R001C00 and later versions Transceiver form factor SFP+ Transmission speed 10GE Center wavelength (nm) 1310 Standard compliance 10GBASE-LRM Connector type LC Applicable cable and maximum transmission distance Multimode fiber (with diameter of 62.5 μm): 220m Multimode

Contact Us 03030JCT SDH SSND00IFSD01 IFSD 2 port intermediate board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports

Contact Us Functions and Features The SLD4 transmits and receives 2xSTM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4. Table 1 Functions and features of the SLD4 Function and Feature SLD4 Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us Functions and Features The DXA cross-connects 63xE1 signals at the 64 kbit/s level on the system side. Table 1 provides the functions and features of the DXA. Table 1 Functions and features of the DXA Function and Feature DXA Basic functions Cross-connects 63 channels of framed E1 signals. Alarms and performance events Reports various alarms and performance events, which facilitates the management and maintenance of the equipment. Maintenance features Supports

Contact Us Functions and Features The ADL4 supports the ATM switching and ATM protection. Table 1 provides the functions and features of the ADL4. Table 1 Functions and features of the ADL4 Function and Feature ADL4 Basic functions Transmits/Receives and processes 1xSTM-4 ATM services. Type of optical interface Supports the following types of optical interfaces: S-4.1, L-4.1, L-4.2 and Ve-4.2. Connector type LC Type of optical module SFP E3 ATM interface Supports 12xE3

Contact Us Functions and Features The SLD4A transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4A. Table 1 Functions and features of the SLD4A Function and Feature SLD4A Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us 03056293 OptiX OSN 1500 ESR2EFT4 EFT4 R2EFT4 4port 10M/100M Ethernet pass-through processing board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

HUAWEI OI4 OI4D OI2D Metro3000 OSN2500+The Metro 5000 (OptiX 10G) optical transmission equipment consists of racks, subracks, expansion subracks and several optional plug-in boards and associated accessories that can be flexibly configured as a terminating multiplexer (TM), add-drop multiplexer (ADM) , And a regenerative repeater (REG). Metro5000 (OptiX 10G) optical transmission equipment can be STM-1, STM-4, STM-16 and STM-64 between the various levels of online upgrades.The

Huawei OPM30M OPM30M 02311NYY 220 AC to DC -48V OUTDOOR POWER MODULE Huawei RRU OPM15M OPM15 OPM50M OPM50Contact Us In response to the rapid development of the communication industry and site modernization, Huawei launched a series of simple, efficient, and intelligent power systems that integrate digital and big data technologies. Multiple models of embedded power products provide 30–400 A DC outputs and use rectifiers with an efficiency of up to 98%, and are highly

Contact Us 03052501SSRDCXLL1614 CXLL1614 OSN1500 STM-16 master cross-connect optical interface board (L-16.2, LC) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

Contact Us 03027509 OptiX OSN 1500B SSN1EU04 N1EU04 STM 4-electric interface leading board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the

Contact Us Functions and Features EMS4 boards support the Layer 2 switching, link convergence, and multicast functions. Table 1 lists the functions and features supported by EMS4 boards. Table 1 Functions and features supported by EMS4 boards Function and Feature Description Basic functions Receives/Transmits and processes 4xGE and 16xFE services Port types Supports 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in

Contact Us Functions and Features EGS4 boards support the Layer 2 switching, link aggregation, and multicast functions. Table 1 lists the functions and features supported by EGS4 boards. Table 1 Functions and features supported by EGS4 boards Function and Feature Description Basic functions Receives/Transmits and processes 4xGE services. Port types EGS4 boards support 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in

Contact Us Functions and Features The SLT1 transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLT1. Table 1 Functions and features of the SLT1 Function and Feature SLT1 Basic functions Transmits and receives 12xSTM-1 optical signals. Specifications of the optical interface Supports S-1.1, L-1.1 and L

Contact Us PEGS2 SSQ1PEGS2 PEGS1 Q1PEGS2 R1PEGS1 N1PEG8 PEG16 N1PEG16 OptiX OSN1500 OSN2500 OSN3500 OSN7500 OSN1500B • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The

Contact Us Functions and Features The SL16 receives and transmits 1xSTM-16 optical signals and processes overhead bytes. Table 1 provides the functions and features of the SL16. Table 1 Functions and features of the SL16 Function and Feature Description Basic functions Transmits and receives 1xSTM-16 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces, namely, the L-16.2, L-16.2Je, V-16.2Je (with the booster

Contact Us Functions and Features The PD1 processes E1 signals, processes overhead bytes, reports alarms and performance events, provides maintenance features, and supports the TPS protection. Table 1 provides the functions and features of the PD1. Table 1 Functions and features of the PD1 Function and Feature PD1 R1PD1 R2PD1 Basic functions Processes 32xE1 signals. Processes 32xE1 signals. Service processing Transmits/Receives and processes 32xE1 electrical signals when