Huawei Optical Transceiver

Contact Us 03052361 SSND00EGT215 double light mouth gigabit Ethernet passthrough processing board (1000 base-t (RJ45) SFP) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The

Contact Us Functions and FeaturesThe PIU is used to receive the power supply and to provide the lightning protection function and filtering function.Table 1 provides the functions and features of the PIU.Table 1 Functions and features of the PIU Function and FeaturePIULightning protection functionProvides the lightning protection function and reports the alarm that indicates a surge protection failure.Filtering functionEnhances the electromagnetic compatibility of the system

Contact Us Functions and Features The IDL4 supports the ATM switching, IMA, and ATM protection. Table 1 provides the functions and features of the IDL4. Table 1 Functions and features of the IDL4 Function and Feature IDL4 Basic functions Transmits/Receives and processes 1xSTM-4 ATM services. Type of optical interface Supports the following types of optical interfaces: S-4.1, L-4.1, L-4.2 and Ve-4.2. Connector type LC Optical module type SFP E3 ATM interface Does not support

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com www.uonel-telecom.com/ SFP-10G-ZCW1531 compatible CWDM 10g 80km 1470~ 1610nm LC SFP+ module Transceiver Description: The CWDM 10g 80km 1470~ 1610nm LC SFP+ module Transceiver is a 10Gbps enhanced small form factor pluggable SFP+ transceiver compatible with 10GBASE- CWDM /10GFC. It is suitable for 80Km single-mode fiber (SMF) communications in 10Gbps Ethernet. Features: Up

Contact Us 03050887 SSN2EGS2(1000BASE-ZX,1550-LC) OptiX OSN1500A EGS2 2 switched gigabit Ethernet processing board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

Contact Us Functions and Features The SLT1 transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLT1. Table 1 Functions and features of the SLT1 Function and Feature SLT1 Basic functions Transmits and receives 12xSTM-1 optical signals. Specifications of the optical interface Supports S-1.1, L-1.1 and L

Contact Us Functions and Features The SLQ4 transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ4. Table 1 Functions and features of the SLQ4 Function and Feature SLQ4 Basic functions Transmits and receives 4xSTM-4 optical signals. Specifications of the optical interface Supports different types of

Contact Us Functions and Features The SP1S/SP1D/SP2D/PD2S/PD2D/PD2T transmits and receives E1 electrical signals, processes VC-12 path overheads, and generates alarm signals on the tributary. The SP1S is a 4xE1 electrical interface board. The SP1D is an 8xE1 electrical interface board. The SP2D is a 16xE1 electrical interface board. The PD2S is a 16xE1 electrical interface board. The PD2D is a 32xE1 electrical interface board. The PD2T is a 48xE1 electrical interface board.

Contact Us Functions and Features The SLD4A transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4A. Table 1 Functions and features of the SLD4A Function and Feature SLD4A Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us The SL16A receives and transmits 1xSTM-16 optical signals, processes overhead bytes, and performs the MSP. Table 1 describes the functions and features of the SL16A. Table 1 Functions and features of the SL16A Function and Feature Description Basic functions Transmits and receives 1xSTM-16 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1, and L-16.2. The characteristic

Contact Us Functions and Features The SLD4 transmits and receives 2xSTM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4. Table 1 Functions and features of the SLD4 Function and Feature SLD4 Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us The SL16A receives and transmits 1xSTM-16 optical signals, processes overhead bytes, and performs the MSP. Table 1 describes the functions and features of the SL16A. Table 1 Functions and features of the SL16A Function and Feature Description Basic functions Transmits and receives 1xSTM-16 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1, and L-16.2. The characteristic

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.comwww.uonel-telecom.com Specifications Item Description Part Number 02310CRM Version Support Supported in V100R001C00 and later versions Transceiver form factor SFP+ Transmission speed 10GE Center wavelength (nm) 1310 Standard compliance 10GBASE-LRM Connector type LC Applicable cable and maximum transmission distance Multimode fiber (with diameter of 62.5 μm): 220m Multimode

Contact Us Functions and Features The PQ1 processes E1 signals, processes overhead bytes, reports alarms and performance events, provides maintenance features, and supports the TPS protection. Table 1 provides the functions and features of the PQ1. Table 1 Functions and features of the PQ1 Function and Feature PQ1 N1PQ1 N2PQ1 Basic functions Processes 63xE1 signals. Processes 63xE1 signals. Service processing Processes 63xE1 electrical signals when working with the interface

Contact Us Functions and Features The SL1A transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL1A. Table 1 Functions and features of the SL1A Function and Feature SL1A Basic functions Transmits and receives 1xSTM-1 optical signals. Specifications of the optical interface Supports different types of

34060290 Huawei Low Speed Transceiver,ESFP,1310nm,1.25Gb/s,-9dBm,-3dBm,-19dBm,LC(-40~85),10km ESFP-1310nm-1000Base-LX DeliveryCargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done. Delivery OptionsEstimated Delivery Time DHL3-5 business days Fedex3-5 business days By Sea10-20 business daysNotice: Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There

Contact Us Functions and Features The SP1S/SP1D/SP2D/PD2S/PD2D/PD2T transmits and receives E1 electrical signals, processes VC-12 path overheads, and generates alarm signals on the tributary. The SP1S is a 4xE1 electrical interface board. The SP1D is an 8xE1 electrical interface board. The SP2D is a 16xE1 electrical interface board. The PD2S is a 16xE1 electrical interface board. The PD2D is a 32xE1 electrical interface board. The PD2T is a 48xE1 electrical interface board.

Contact Us Functions and Features EMS4 boards support the Layer 2 switching, link convergence, and multicast functions. Table 1 lists the functions and features supported by EMS4 boards. Table 1 Functions and features supported by EMS4 boards Function and Feature Description Basic functions Receives/Transmits and processes 4xGE and 16xFE services Port types Supports 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in

Contact Us Functions and Features The SLO1 transmits and receives 8xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLO1. Table 1 Functions and features of the SLO1 board Function and Feature SLO1 Basic functions Receives and transmits 8xSTM-1 optical signals. Specifications of the optical interface Supports different

Contact Us Functions and Features The SL4A transmits and receives 1xSTM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL4A. Table 1 Functions and features of the SL4A Function and Feature SL4A Basic functions Receives and transmits 1xSTM-4 optical signals, and processes 1xSTM-4 standard or concatenation services.