Huawei Optical Transceiver

Contact Us Functions and Features The ETF8A receives and transmits 8x100M Ethernet electrical signals. The ETF8A must work with the N5EFS0. Technical Specifications of the ETF8A The technical specifications of the ETF8A include the parameters specified for electrical interfaces, mechanical specifications, and power consumption. Parameters Specified for Interfaces Table 1 lists the parameters specified for the electrical interfaces of the ETF8A. Table 1 Specifications of the

Contact Us Functions and Features The SPQ4 processes 4xE4/STM-1 electrical signals, processes overhead bytes, reports alarms and performance events, provides maintenance features, and supports protection schemes. Table 1 provides the functions and features of the SPQ4. Table 1 Functions and features of the SPQ4 Function and Feature SPQ4 Basic functions Processes 4xSTM-1/E4 signals. Service processing Transmits/Receives and processes 4xE4/STM-1 electrical signals. The E4

Contact Us Functions and Features The SCB integrates the functions of the SCC unit, XC unit, STG unit, EOW unit, OI2D/OI4D/O16D, and SP2D. Table 1 provides the functions and features of the SCB. Table 1 Functions and features of the SCB Function and Feature SCB Cross-connect capability The higher order cross-connect capacity is 21.25 GB and the lower order cross-connect capacity is 5 GB. Supports the cross-connection at the VC-4, VC-3, and VC-12 levels, and realizes the

Contact Us 03030GQM SDH Optix OSN 3500 SSN2BPA(14/-38,LC) Huawei OSN BPA optical booster and pre-amplifier board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500System FeaturesSubrack dimensions498mm(W) X 287mm (D)X 700mm (H)Switching capacityPacket: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order)Service slots15 slots for processing boards and 16 slots for interface boardsHighly reliable design1+1

Contact Us SSN1SLD64 HUAWEI OSN3500 SLD64 2 XSTM - 64 optical interface board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500System FeaturesSubrack dimensions498mm(W) X 287mm (D)X 700mm (H)Switching capacityPacket: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order)Service slots15 slots for processing boards and 16 slots for interface boardsHighly reliable design1+1 hot backup for power supply modules1

Contact Us Functions and Features During the long-haul transmission of optical signals, the attenuation of the signals is high. Hence, the BA and PA are required to ensure that the optical receiver can receive normal optical signals. Table 1 provides the functions and features of the BPA. Table 1 Functions and features of the BPA Function and Feature BPA Basic functions Increases the launched optical power of the line board to 13-15 dBm or 15-17 dBm. As a result, when the G

Contact Us 03056237 ESN1FXS12 FXS12 12 road FXS FXO processing board OSN1500 OSN 1500 • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com www.uonel-telecom.com Overview (SFP-10G-ZCW1551) Optical Transceiver,SFP+,10G,Single-mode Module(CWDM,1551nm,70km,LC Part Number 02310SSC Model SFP-10G-ZCW1551 Description Optical Transceiver,SFP+,10G,Single-mode Module(CWDM,1551nm,70km,LC) Attributes Hardware List Price(USD) 5,253.40 Category Optical Transceiver Product Line Networking Product Family Switch Product

Contact Us Functions and Features The SLQ4 transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ4. Table 1 Functions and features of the SLQ4 Function and Feature SLQ4 Basic functions Transmits and receives 4xSTM-4 optical signals. Specifications of the optical interface Supports different types of

Contact Us Functions and Features The SLD4 transmits and receives 2xSTM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4. Table 1 Functions and features of the SLD4 Function and Feature SLD4 Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us Functions and Features The POI/POU is used to access the power supply and to provide the lightning protection function and filtering function. Table 1 provides the functions and features of the POI/POU. Table 1 Functions and features of the POI/POU Function and Feature POI/POU Lightning protection function Provides the lightning protection function to prevent a lightning strike from occurring on the power board. Filtering function Enhances the electromagnetic

Contact Us Functions and Features During the long-haul transmission of optical signals, the attenuation of the signals is high. Hence, the BA is required to ensure that the optical receiver can receive normal optical signals. The BA2 amplifies the power of two-channel optical signals. Table 1 provides the functions and features of the BA2. Table 1 Functions and features of the BA2 Function and Feature BA2 Basic functions Increases the launched optical power of the line board

Contact Us Functions and Features EMS2 boards support the Layer 2 switching, link convergence, and multicast functions. Table 1 lists the functions and features supported by EMS2 boards. Table 1 Functions and features supported by EMS2 boards Function and Feature Description Basic functions Receives/Transmits and processes 2xGE and 16xFE services. Port types Supports 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in

Contact Us Functions and Features The SEP1 processes STM-1 signals. When the interfaces are available on the front panel of the SEP1 (the logical board of the SEP1 is displayed as SEP1 on the U2000), the SEP1 processes 2xSTM-1 electrical signals. When the SEP1 is used with the interface board (the logical board of the SEP1 is displayed as SEP on the U2000), the SEP1 processes 8xSTM-1 optical/electrical signals or 4xSTM-1 electrical signals. The physical boards of the two

Contact Us Functions and Features The SLH41 is used to transmit and receive 16xSTM-1/STM-14 optical signals, to perform O/E conversion for the STM-1/STM-4 optical signals, to extract or insert overhead bytes, and to report alarms generated on the line. Table 1 provides the functions and features of the SLH41. Table 1 Functions and features of the SLH41 Functions and Features Description Basic functions Transmits and receives 16xSTM-1/STM-4 optical signals. Specifications of

Contact Us 03052473 SDH OSN3500 SSN1SLQ1A HUAWEI SLQ1A 4 XSTM -1 optical interface board (Ve - 1.2, LC) Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500System FeaturesSubrack dimensions498mm(W) X 287mm (D)X 700mm (H)Switching capacityPacket: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order)Service slots15 slots for processing boards and 16 slots for interface boardsHighly reliable design1+1 hot backup

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

Contact Us 03030NKY OSN1500 10G ODX0480T0 XFP • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports carriers' distributed

Contact Us Functions and Features The SCB integrates the functions of the SCC unit, XC unit, STG unit, EOW unit, OI2D/OI4D/O16D, and SP2D. Table 1 provides the functions and features of the SCB. Table 1 Functions and features of the SCB Function and Feature SCB Cross-connect capability The higher order cross-connect capacity is 21.25 GB and the lower order cross-connect capacity is 5 GB. Supports the cross-connection at the VC-4, VC-3, and VC-12 levels, and realizes the