Huawei Optical Transceiver

Contact Us 03020VWP TNN1PSXCS N1PSXCS PSXCS Cross-Connect and System Control BoardThe OptiX OSN 7500 intelligent optical switching system (the OptiX OSN 7500 for short) is the next-generation intelligent optical core switching (OCS) equipment and is developed by Huawei on the basis of the current situation and development trend of the metropolitan area network (MAN).The OptiX OSN 7500 is mainly used as a service scheduling node at the metropolitan backbone layer. That is, it

Contact Us 03052022 SDH products OSN1500A SSR1CXLQ1(S-1.1,LC) CXLQ1 cross optical interface board (S - 1.1, LC) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

03038475 155 622H sdh OptiX Metro 1000 SS42EFT Huawei EFT 4 ports 10/100M ethernet eletrical interface board The OptiX Metro 1000, a type of STM-1/STM-4/STM-16 case-shaped equipment, was developed by Huawei to enable access for multiple types of services. It can be used at the access layer of Metropolitan Area Networks (MANs) and local transmission networks to access VIP private lines, wireless base stations, and Digital Subscriber Line Access Multiplexers (DSLAMs). Features

Contact Us 03052472 HUAWEI interface board Optix OSN 3500 SSN1SLQ4A (Ve-4.2,LC) HUAWEI SLQ4A 4 *STM - 4 optical interface board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500System FeaturesSubrack dimensions498mm(W) X 287mm (D)X 700mm (H)Switching capacityPacket: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order)Service slots15 slots for processing boards and 16 slots for interface boardsHighly

new original 100G-4*25-1310nm-10km-SM-CFP OSN010N04 sfp transceiver Product Details Model OSN010N04 TX Power -2.5~+3dBm Form Type CFP RX Sens -8.6dBm Data Rate 100G Media Type SMF Wavelength 1310nm DDM With Reach 10Km Weight 0.03Kg Connector 2*LC Delivery Time 3 Days Source EML/PIN HTS-Harmonized Code 8517706000 Temperature 0℃~+70℃ Certificate CE,RoHs,FCC Packaging & Shipping Our Services 100% Low Price Guarantee: Uonel provides high-quality products at low wholesale

Any request for detail specifications ,please contact me .Mobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com 02310LPK CWDM-SFPGE-1491,CWDM optical module-eSFP-2.5G-single mode module (1491nm, 80km, LC) Part Number: LE2MGSC40DE0/LE2MGSC40ED0 Compatible: Data Rate: 1.25G Wavelength: 1310nm/1490nm Connector: Single LC Cable Type: SMF Reach Distance: 40km Operating Temperature Range: 0°C to 70°C Applications: Fast Ethernet, Gigabit Fibre Channel, MSA Compliant

Contact Us Functions and Features The SL1 transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL1. Table 1 Functions and features of the SL1 Function and Feature SL1 Basic functions Transmits and receives 1xSTM-1 optical signals. Specifications of the optical interface Supports different types of

Contact Us The SL16A receives and transmits 1xSTM-16 optical signals, processes overhead bytes, and performs the MSP. Table 1 describes the functions and features of the SL16A. Table 1 Functions and features of the SL16A Function and Feature Description Basic functions Transmits and receives 1xSTM-16 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1, and L-16.2. The characteristic

Contact Us Functions and Features EMS2 boards support the Layer 2 switching, link convergence, and multicast functions. Table 1 lists the functions and features supported by EMS2 boards. Table 1 Functions and features supported by EMS2 boards Function and Feature Description Basic functions Receives/Transmits and processes 2xGE and 16xFE services. Port types Supports 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in

Contact Us Functions and Features The MST4 supports the access of multiple services, alarms, and other maintenance functions. Table 1 provides the functions and features of the MST4. Table 1 Functions and features of the MST4 Function and Feature MST4 Basic functions Provides four independent ports to transmit/receive multiple services. Supports the transparent transmission of the SAN and Video services. Connector type LC Optical module type SFP Service types Supports FC100

Contact Us 03021TUT Huawei SN1EFS0A01 N1EFS OptiX OSN 1500 16-road FE-with exchange function fast ethernet processing module• OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met.

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

Contact Us Functions and Features The SL1A transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL1A. Table 1 Functions and features of the SL1A Function and Feature SL1A Basic functions Transmits and receives 1xSTM-1 optical signals. Specifications of the optical interface Supports different types of

Contact Us The PCXLN processes SDH signals, controls communication, grooms services, and inputs/ outputs clock signals. SDH Processing Unit Table 1 provides the functions and features of the SDH processing unit of the PCXLN. Table 1 Functions and features of the SDH processing unit of the PCXLN Function and Feature Description Basic functions Transmits and receives 1xSTM-1/STM-4/STM-16 optical signals. Specifications of the optical interface The STM-1/STM-4/STM-16 optical

Contact Us The SLQ1A transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ1A. Table 1 Functions and features of the SLQ1A Function and Feature SLQ1A Basic functions Transmits and receives 4xSTM-1 optical signals. Specifications of the optical interface Supports different types of standard optical

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com www.uonel-telecom.com SFP-10G-ZCW1471 compatible 10G SFP+ 80km 1470~1610nm LC CWDM Module optic Transceiver Description: The 10G SFP+ 80km 1470~1610nm LC CWDM Module optic Transceiver is a 10Gbps enhanced small form factor pluggable SFP+ transceiver compatible with 10GBASE- CWDM /10GFC. It is suitable for 80Km single-mode fiber (SMF) communications in 10Gbps Ethernet.

Contact Us Functions and Features The SL1A transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL1A. Table 1 Functions and features of the SL1A Function and Feature SL1A Basic functions Transmits and receives 1xSTM-1 optical signals. Specifications of the optical interface Supports different types of

Contact Us Functions and Features An HSNS3 board receives mixed signals of STM-16/STM-64 services with the total bandwidth not higher than 40 Gbit/s from the backplane, encapsulates them into ODU1/ODU2/ODU3/OTU3 units, and transmits them out through an optical port. Table 1 and Table 2 list the functions and features supported by an HSNS3 board. Table 1 Functions and features supported by an HSNS3 board Function and Feature Description Basic functions Provides one OTU3

Contact Us Functions and Features The SL1 transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL1. Table 1 Functions and features of the SL1 Function and Feature SL1 Basic functions Transmits and receives 1xSTM-1 optical signals. Specifications of the optical interface Supports different types of