Huawei Optical Transceiver

Contact Us Functions and Features The OI4/OI4D transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. The OI4 is a 1xSTM-4 optical interface board. The OI4D is a 2xSTM-4 optical interface board. The OI4D is available in two types: pluggable OI4D and integrated OI4D. The pluggable OI4D can be installed in slot IU1, IU2, or IU3. The integrated OI4D is

Contact Us Functions and Features During the long-haul transmission of optical signals, the attenuation of the signals is high. Hence, the BA is required to ensure that the optical receiver can receive normal optical signals. The BA2 amplifies the power of two-channel optical signals. Table 1 provides the functions and features of the BA2. Table 1 Functions and features of the BA2 Function and Feature BA2 Basic functions Increases the launched optical power of the line board

Contact Us PEGS1 boards process and forward 1xGE services, and support the QoS function such as traffic classification and queue scheduling for data packets. Table 1 lists the functions and features supported by PEGS1 boards. Table 1 Functions and features supported by PEGS1 boards Function and Feature Description Basic functions Receives/Transmits and processes 1xGE optical and electrical signals. Port types Supports 1000BASE-SX, 1000BASE-LX, 1000BASE-VX, and 1000BASE-ZX

Contact Us UONEL CO LIMITED Contact person:Natasha Mobile/Whatsapp/Skype/Wechat:+86 13798264392 Website:www.uonel.com www.uonel-telecom.com 03050871 OSN1500 SSN1EFF8 (100Base-LX,1310-LC) EFF8 8-way 10/100 m fiber Ethernet interface board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly

Contact Us 03070230 OSN1500 Huawei SF16 SSN1SF16-(640Km/LC/APD)• OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports carriers'

Contact Us PEG8 SSN1PEG8 MSTP OSN7500 The OptiX OSN 7500 intelligent optical switching system (the OptiX OSN 7500 for short) is the next-generation intelligent optical core switching (OCS) equipment and is developed by on the basis of the current situation and development trend of the metropolitan area network (MAN). The OptiX OSN 7500 is mainly used as a service scheduling node at the metropolitan backbone layer. That is, it functions as optical core switching equipment (OCS

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

Contact Us Functions and Features The SLD4 transmits and receives 2xSTM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4. Table 1 Functions and features of the SLD4 Function and Feature SLD4 Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us ML1 boards transmit/receive and process 16-channel E1 CES services. Table 1 lists the functions and features supported by ML1 boards. Table 1 Functions and features supported by ML1 boards Function and Feature Description Basic functions Transmits/Receives and processes a maximum of 16 E1 CES services. Port types Supports 75/120-ohm E1 electrical ports. The electrical ports use 2mmHM connectors. Port characteristics Loopback types of the port Inloop, outloop, or

Contact Us 03021ARY SSN3PSXCSA PSXCSA N3PSXCSA for OSN3500 super dual planar crossover clock board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards Highly reliable design 1+1 hot

Contact Us Functions and Features The ADQ1 supports the ATM switching and ATM protection. Table 1 provides the functions and features of the ADQ1. Table 1 Functions and features of the ADQ1 Function and Feature ADQ1 Basic functions Transmits/Receives and processes 4xSTM-1 ATM services. Type of optical interface Supports different types of standard optical interfaces, namely, the Ie-1, S-1.1, L-1.1, L-1.2, and Ve-1.2. The characteristics of the optical interfaces of the S-1.1,

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com Specifications Item Description Part Number 02310CRM Version Support Supported in V100R001C00 and later versions Transceiver form factor SFP+ Transmission speed 10GE Center wavelength (nm) 1310 Standard compliance 10GBASE-LRM Connector type LC Applicable cable and maximum transmission distance Multimode fiber (with diameter of 62.5 μm): 220m Multimode fiber (OM1) (with

Contact Us Functions and Features The SLO1 transmits and receives 8xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLO1. Table 1 Functions and features of the SLO1 board Function and Feature SLO1 Basic functions Receives and transmits 8xSTM-1 optical signals. Specifications of the optical interface Supports different

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.comwww.uonel-telecom.com LE2MGSC40DE0/LE2MGSC40ED0 Compatible 1.25G 1310/1490nm BiDi 40km Transceiver One pair price. Part Number: LE2MGSC40DE0/LE2MGSC40ED0 Compatible: Data Rate: 1.25G Wavelength: 1310nm/1490nm Connector: Single LC Cable Type: SMF Reach Distance: 40km Operating Temperature Range: 0°C to 70°C Applications: Fast Ethernet, Gigabit Fibre Channel, MSA Compliant

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com OSM010C02,High-speed optical module-CFP-1271~1331nm CWDM-41.25Gb/s--4dBm-3.5dBm--11.5dBm-LC-SM-10km,S4017471 Specifications Item Description Part Number 02310CRM Version Support Supported in V100R001C00 and later versions Transceiver form factor SFP+ Transmission speed 10GE Center wavelength (nm) 1310 Standard compliance 10GBASE-LRM Connector type LC Applicable cable and

Contact Us Functions and Features The OBU2 supports the online optical performance monitoring function, gain lock, transient control, and other functions. Table 1 provides the functions and features of the OBU2. Table 1 Functions and features of the OBU2 Function and Feature OBU2 Basic functions Amplifies a maximum of 40 channels of optical signals with the channel spacing of 100 GHz at the same time. Supports the system to transmit services over different fiber spans without

Contact Us 03050839 SSN2EGS2(1000BASE-SX,850-LC) OptiX OSN 1500A EGS2 2 switched gigabit Ethernet processing board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

Contact Us Functions and Features EGS2 boards support the Layer 2 switching, MPLS, and broadcast functions. Table 1 lists the functions and features supported by EGS2 boards. Table 1 Functions and features supported by EGS2 boards Function and Feature Description Basic functions Processes 2xGE services. Port types EGS2 boards support 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in compliance with IEEE 802.3z. The optical

Contact Us Functions and Features The SL4 transmits and receives 1xSTM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL4. Table 1 Functions and features of the SL4 Function and Feature SL4 Basic functions Receives and transmits 1xSTM-4 optical signals, and processes 1xSTM-4 standard or concatenation services. Specificatio

Contact Us Functions and Features The SLQ1 transmits and receives 4xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ1. Table 1 Functions and features of the SLQ1 Function and Feature SLQ1 Basic functions Transmits and receives 4xSTM-1 optical signals. Specifications of the optical interface Supports different types