Huawei Optical Transceiver

Contact Us 03052379 Optical transmission system OSN 1500 SSQDCXLL1613 03052379 SSQDCXLL1613 STM-16 master cross-connect optical interface board (L-16.2, LC) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

Contact Us Huawei EMS4 N1EMS4 SSN1EMS4 EMS2 N1EMS2 SSND00EMS2 HUAWEI OptiX OSN1500 OSN2500 OSN3500 OSN7500 OSN1500B • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

Contact Us Functions and Features During the long-haul transmission of optical signals, the attenuation of the signals is high. Hence, the BA and PA are required to ensure that the optical receiver can receive normal optical signals. Table 1 provides the functions and features of the BPA. Table 1 Functions and features of the BPA Function and Feature BPA Basic functions Increases the launched optical power of the line board to 13-15 dBm or 15-17 dBm. As a result, when the G

Contact Us Functions and Features The OI4/OI4D transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. The OI4 is a 1xSTM-4 optical interface board. The OI4D is a 2xSTM-4 optical interface board. The OI4D is available in two types: pluggable OI4D and integrated OI4D. The pluggable OI4D can be installed in slot IU1, IU2, or IU3. The integrated OI4D is

Contact Us Functions and Features The MR2C is applied to the DWDM system. The channel spacing is 0.8 nm. The MR2C supports the add/drop multiplexing function between any two adjacent wavelengths. Table 1 provides the functions and features of the MR2C. Table 1 Functions and features of the MR2C Function and Feature MR2C Basic functions Adds/Drops any two adjacent standard wavelengths defined in ITU-T G.692 (DWDM). The signals are transparently transmitted and the operating

Contact Us Functions and Features The SLO1 transmits and receives 8xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLO1. Table 1 Functions and features of the SLO1 board Function and Feature SLO1 Basic functions Receives and transmits 8xSTM-1 optical signals. Specifications of the optical interface Supports different

Contact Us UONEL CO LIMITED Contact person:Natasha Mobile/Whatsapp/Skype/Wechat:+86 13798264392 Website:www.uonel.com www.uonel-telecom.com/ JL64 JL64E SSJ1JL64A JD64E JF64E SSJ1JL64A02-S64.2b Wave amplifier board for OptiX OSN 9500 OSN9500 As an intelligent optical switching platform, the OptiX OSN 9500 is the optical core switching (OCS) equipment. The OptiX OSN 9500 is mainly used in a national trunk network, provincial trunk network, or MAN trunk network as a node

Original SFP Huawei 10G-1310nm-10km-SM-XFP STM64-LX-SM1310 02315208 Huawei TransceiversPart numberDescriptionSFP-FE-SX-MM1310-SFP-100M/155M-(1310nm,2km,LC)eSFP-FE-LX-SM1310-eSFP-100M/155M-(1310nm,15km,LC)S-SFP-FE-LH40-SM1310-eSFP-FE-(1310nm,40km,LC)S-SFP-FE-LH80-SM1550-eSFP-FE-(1550nm,80km,LC)OST015N00-eSFP-622M-(1310nm,15km,LC)OST040N00-eSFP-622M-(1310nm,40km,LC)OST080N00-eSFP-622M-(1550nm,80km,LC)SFP-1000BaseT-SFP-GE-(100m,RJ45)eSFP-GE-SX-MM850-eSFP-GE-(850nm,0.5km,LC)SFP

Contact Us Ethernet Interface Boards ET1/ET1O/ET1D/EF1 (Supporting the ML-PPP Protocol) The ET1, ET1O, ET1D, and EF1 boards support the multi-link point to point protocol (ML-PPP) only. The mapping granularity is VC-12. These boards transmit Ethernet services. Functions Provides 10M/100M Ethernet electrical interfaces and 100M optical interfaces, whose electrical characteristics, such as the flow control function, comply with IEEE 802.3x. Supports the working modes of auto

Contact Us Functions and Features The SLO1 transmits and receives 8xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLO1. Table 1 Functions and features of the SLO1 board Function and Feature SLO1 Basic functions Receives and transmits 8xSTM-1 optical signals. Specifications of the optical interface Supports different

Contact Us 03052471 interface board Optix OSN 3500 SSN1SLQ4A (L-4.2,LC) SLQ4A Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards Highly reliable design 1+1 hot backup for power supply

Contact Us Functions and Features EFT8A boards support the transparent transmission of Ethernet services, LCAS function, and test frames. Table 1 lists the functions and features supported by EFT8A boards. Table 1 Functions and features supported by EFT8A boards Function and Feature Description Basic functions Transparently transmits 8xFE services. Port types Supports 10BASE-T/100BASE-TX signals. Electrical ports comply with IEEE 802.3u. Functions when being used with an

Contact Us Functions and Features The SLQ4A transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ4A. Table 1 Functions and features of the SLQ4A Function and Feature SLQ4A Basic functions Transmits and receives 4xSTM-4 optical signals. Specifications of the optical interface Supports different types

Contact Us 03052477 SDH OSN3500 SSN1SLQ1A SLQ1A 4 *STM-1 optical interface board (Ve - 1.2, LC) Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards Highly reliable design 1+1 hot backup

Huawei OPM15M OUTDOOR POWER MODULE Huawei RRU MPW800-48A 48V15AContact Us In response to the rapid development of the communication industry and site modernization, Huawei launched a series of simple, efficient, and intelligent power systems that integrate digital and big data technologies. Multiple models of embedded power products provide 30–400 A DC outputs and use rectifiers with an efficiency of up to 98%, and are highly applicable. The integrated field supervision unit

Contact Us 03056266 SSN1SLD4A20 N1SLD4A20 SLD4 2xSTM-4 optical interface board(S-4.1,LC) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the

Contact Us Functions and Features EFT4 boards support the transparent transmission of Ethernet services, LCAS function, and test frames. Table 1 lists the functions and features supported by EFT4 boards. Table 1 Functions and features supported by EFT4 boards Function and Feature Description Basic functions Transmits 4xFE services. Port types Supports 10BASE-T/100BASE-TX signals. Electrical ports comply with IEEE 802.3u. Functions when being used with an interface board

Contact Us Functions and Features The MST4 supports the access of multiple services, alarms, and other maintenance functions. Table 1 provides the functions and features of the MST4. Table 1 Functions and features of the MST4 Function and Feature MST4 Basic functions Provides four independent ports to transmit/receive multiple services. Supports the transparent transmission of the SAN and Video services. Connector type LC Optical module type SFP Service types Supports FC100

Contact Us Functions and Features EGS4 boards support the Layer 2 switching, link aggregation, and multicast functions. Table 1 lists the functions and features supported by EGS4 boards. Table 1 Functions and features supported by EGS4 boards Function and Feature Description Basic functions Receives/Transmits and processes 4xGE services. Port types EGS4 boards support 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in