Huawei Optical Transceiver

Contact Us Functions and Features The SL1A transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL1A. Table 1 Functions and features of the SL1A Function and Feature SL1A Basic functions Transmits and receives 1xSTM-1 optical signals. Specifications of the optical interface Supports different types of

Contact Us Functions and Features The RPC01 supports the online optical performance monitoring function and other functions. Table 1 provides the functions and features of the RPC01. Table 1 Functions and features of the RPC01 Function and Feature RPC01 Basic functions Generates multi-channel pump light of high power, which provides energy for the amplification of signals in the fiber. Realizes the distributed online amplification of signals over long distance with wide

Contact Us 03037362 Optix OSN 3500 SSN1BPA (17/-38,LC) HUAWEI BPA optical power and the preamplifier board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500System FeaturesSubrack dimensions498mm(W) X 287mm (D)X 700mm (H)Switching capacityPacket: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order)Service slots15 slots for processing boards and 16 slots for interface boardsHighly reliable design1+1 hot

Contact Us 03038480 SDH products OSN 1500B SSR2AUX AUX 03038480 SSR2AUX auxiliary system interface board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching

Original HUAWEI SFP 10G-1310nm-10km-SM-SFP+ FE-SFP optical transceiver S-SFP-FE-LH40-SM1310 Optical transceiver, eSFP, FE, single-mode module (1310 nm, 40 km, LC)S-SFP-FE-LH80-SM1550 Optical transceiver, eSFP, FE, single-mode module (1550 nm, 80 km, LC)GE-SFP optical transceiver SFP-1000BaseT Copper transceiver, SFP, GE, electrical interface module (100 m, RJ45)eSFP-GE-SX-MM850 Optical transceiver, eSFP, GE, multimode module (850 nm, 0.5 km, LC)SFP-GE-LX-SM1310 Optical

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

Contact Us Functions and Features The SLQ4 transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ4. Table 1 Functions and features of the SLQ4 Function and Feature SLQ4 Basic functions Transmits and receives 4xSTM-4 optical signals. Specifications of the optical interface Supports different types of

Contact Us 03056227 ESR1PL1A SSR2PL1A PL1 16*E1service processing board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports

Original XFP-STM64-LX-SM1310 02315208 OTN 10G FE-SFP optical transceiver S-SFP-FE-LH40-SM1310 Optical transceiver, eSFP, FE, single-mode module (1310 nm, 40 km, LC)S-SFP-FE-LH80-SM1550 Optical transceiver, eSFP, FE, single-mode module (1550 nm, 80 km, LC) GE-SFP optical transceiver SFP-1000BaseT Copper transceiver, SFP, GE, electrical interface module (100 m, RJ45)eSFP-GE-SX-MM850 Optical transceiver, eSFP, GE, multimode module (850 nm, 0.5 km, LC)SFP-GE-LX-SM1310 Optical

Contact Us 03029595 Optix OSN 3500 SSN2DCU (40km/60km,LC,3dB) DCUdual dispersion compensation board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards Highly reliable design 1+1 hot

Contact Us Functions and Features The DCU can compensate for the dispersion for a maximum of two channels of optical signals. The DCU can be used with the BA and PA. Table 1 provides the functions and features of the DCU. Table 1 Functions and features of the DCU Function and Feature N1DCU N2DCU Basic functions Compensates for the dispersion of a maximum of two channels of optical signals at the same time. Supports the compensated dispersion of 1020 ps/nm (for the dispersion

Contact Us SDH Optix OSN 3500 N1EGS N3EGS4 N4EGS4 Huawei OSN N4EGS4 4xSTM-4 optical interface board Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500System FeaturesSubrack dimensions498mm(W) X 287mm (D)X 700mm (H)Switching capacityPacket: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order)Service slots15 slots for processing boards and 16 slots for interface boardsHighly reliable design1+1 hot backup for

Contact Us UONEL CO LIMITED Contact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com www.uonel-telecom.com https://uonel.en..com SFP-10G-ZCW1531 compatible CWDM 10g 80km 1470~ 1610nm LC SFP+ module Transceiver Description: The CWDM 10g 80km 1470~ 1610nm LC SFP+ module Transceiver is a 10Gbps enhanced small form factor pluggable SFP+ transceiver compatible with 10GBASE- CWDM /10GFC. It is suitable for 80Km single-mode fiber (SMF)

Contact Us 03052476 OptiX OSN 1500 SLQ1A SSN1SLQ1A (L-1.2 LC) XSTM 4-1 optical interface board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between

Contact Us Functions and Features The SB2D/SB2R/SB2L transmits and receives STM-1 optical signals on a single fiber, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. The SB2D is a 2xSTM-1 single-fiber bidirectional optical interface board. In the case of the left optical interface, signals are transmitted on the 1550 nm wavelength and received on the 1310 nm wavelength. In the case of the

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

Contact Us Functions and Features The DCU can compensate for the dispersion for a maximum of two channels of optical signals. The DCU can be used with the BA and PA. Table 1 provides the functions and features of the DCU. Table 1 Functions and features of the DCU Function and Feature N1DCU N2DCU Basic functions Compensates for the dispersion of a maximum of two channels of optical signals at the same time. Supports the compensated dispersion of 1020 ps/nm (for the dispersion

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com 100G-CWDM4-4*25-1310nm-2km-SM-QSFP28 34061299 for Huawei 100G CWDM CFP QSFP28 TR-FC13T-N00 Packaging & Shipping Our Services 100% Low Price Guarantee: Uonel provides high-quality products at low wholesale prices100% Quality Assurance:All items are ORIGINAL NEW and GENUINE only.Free Technical Support: Our FREE Huawei Expert Consultancy Support is over the phone, by chat, by

Contact Us Functions and Features An HSNS3 board receives mixed signals of STM-16/STM-64 services with the total bandwidth not higher than 40 Gbit/s from the backplane, encapsulates them into ODU1/ODU2/ODU3/OTU3 units, and transmits them out through an optical port. Table 1 and Table 2 list the functions and features supported by an HSNS3 board. Table 1 Functions and features supported by an HSNS3 board Function and Feature Description Basic functions Provides one OTU3

Contact Us Functions and Features The SP1S/SP1D/SP2D/PD2S/PD2D/PD2T transmits and receives E1 electrical signals, processes VC-12 path overheads, and generates alarm signals on the tributary. The SP1S is a 4xE1 electrical interface board. The SP1D is an 8xE1 electrical interface board. The SP2D is a 16xE1 electrical interface board. The PD2S is a 16xE1 electrical interface board. The PD2D is a 32xE1 electrical interface board. The PD2T is a 48xE1 electrical interface board.