Huawei Optical Transceiver

Contact Us Functions and Features The SLD4 transmits and receives 2xSTM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4. Table 1 Functions and features of the SLD4 Function and Feature SLD4 Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us Functions and Features The AIUD/AIUQ supports ATM switching and ATM protection. The AIUD supports two external ports and two internal ports. The AIUQ supports four external ports and four internal ports. The AIUD/AIUQ accesses a maximum of 155 Mbit/s ATM services. The ATM service is accessed by the optical fiber and is in the SDH frame structure. The payload is the ATM service. The AIUD/AIUQ multiplexes and maps the ATM service, loads the ATM service into SDH VC-4s

Contact Us Functions and Features During the long-haul transmission of optical signals, the attenuation of the signals is high. Hence, the BA and PA are required to ensure that the optical receiver can receive normal optical signals. Table 1 provides the functions and features of the BPA. Table 1 Functions and features of the BPA Function and Feature BPA Basic functions Increases the launched optical power of the line board to 13-15 dBm or 15-17 dBm. As a result, when the G

Contact Us 03052459 SSN1SLD4A(S-4.1,LC) OptiX OSN 1500 SLD4A XSTM (S - 4.1, LC) 2-4 optical interface board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth

Contact Us Functions and Features The RPC02 supports the online optical performance monitoring function and other functions. Table 1 provides the functions and features of the RPC02. Table 1 Functions and features of the RPC02 Function and Feature RPC02 Basic functions Generates multi-channel pump light of high power, which provides energy for the amplification of signals in the fiber. Realizes the distributed online amplification of signals over long distance with wide

Contact Us 03053168 OptiX OSN 1500B SSN1SLT1 (L-1.2,LC) 12 XSTM - 1 optical interface board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the

Contact Us 03053165 OSN1500 SLQ4 SSN1SLQ4A N1SLQ4A (L-4.1,LC) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports carriers'

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.comwww.uonel-telecom.com new original 100G-4*25-1310nm-10km-SM-CFP OSN010N04 sfp transceiver Product Details Model OSN010N04 TX Power -2.5~+3dBm Form Type CFP RX Sens -8.6dBm Data Rate 100G Media Type SMF Wavelength 1310nm DDM With Reach 10Km Weight 0.03Kg Connector 2*LC Delivery Time 3 Days Source EML/PIN HTS-Harmonized Code 8517706000 Temperature 0℃~+70℃ Certificate CE,RoHs

Contact Us Functions and Features An FXSO12 board transmits or receives 12-channel analog voice signals, and provides alarms and events for maintenance. Table 1 provides the functions and features supported by an FXSO12 board. Table 1 Functions and features supported by an FXSO12 board Function and Feature Description Basic functions Provides 12 FXS/FXO ports, which can be configured on the NMS. FXS port TX Gain (dB): -12.0 to 0.0, in steps of 0.5. FXS port RX Gain (dB): -6.0

Contact Us Functions and Features The SLO1 transmits and receives 8xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLO1. Table 1 Functions and features of the SLO1 board Function and Feature SLO1 Basic functions Receives and transmits 8xSTM-1 optical signals. Specifications of the optical interface Supports different

Contact Us 03021TUN Huawei SSN5EFS001 N5EFS OptiX OSN 1500 N5EFS001• OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports

Contact Us UONEL CO LIMITED Contact person:Natasha Mobile/Whatsapp/Skype/Wechat:+86 13798264392 Website:www.uonel.com 02112958 SSJB00RACK02 OSN9500 N66T ETSI Cabinet(2000x600x600mm) As an intelligent optical switching platform, the OptiX OSN 9500 is the optical core switching (OCS) equipment. The OptiX OSN 9500 is mainly used in a national trunk network, provincial trunk network, or MAN trunk network as a node grooming services. The key functions of the OptiX OSN 9500 are as

Contact Us Functions and Features The SLQ4A transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ4A. Table 1 Functions and features of the SLQ4A Function and Feature SLQ4A Basic functions Transmits and receives 4xSTM-4 optical signals. Specifications of the optical interface Supports different types

Contact Us UONEL CO LIMITED Contact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com www.uonel-telecom.com https://uonel.en..com LE2MGSC40DE0/LE2MGSC40ED0 Compatible 1.25G 1310/1490nm BiDi 40km Transceiver One pair price. Part Number: LE2MGSC40DE0/LE2MGSC40ED0 Compatible: Data Rate: 1.25G Wavelength: 1310nm/1490nm Connector: Single LC Cable Type: SMF Reach Distance: 40km Operating Temperature Range: 0°C to 70°C Applications: Fast Ethernet

Contact Us Functions and Features The N64/N64Q/FP2D accesses Nx64 kbit/s services and Framed E1 services. The N64/N64Q is an Nx64 kbit/s interface board. The N64/N64Q transmits, receives, and processes multi-protocol physical interface services. The N64 can convert two V.35/V.24/X.21/RS-449/EIA-530 signals and two Framed E1 signals into E1 signals at the same time, map the E1 signals into VC-4s, and send the VC-4 signals to the cross-connect unit. The N64 can also consolidate

Contact Us UONEL CO LIMITED Contact person:Natasha Mobile/Whatsapp/Skype/Wechat:+86 13798264392 Website:www.uonel.com www.uonel-telecom.com 03055403 SSQ2CXL417 2CXL417 STM-4 SCC unit, cross-connect unit, and optical interface unit integrated board(L-4.2,LC) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes

SL4 SS63SL4A SS62SL4B SS61SV4A for OptiX 2500 Metro 3000 Metro3000 OptiX 2500 + (Metro3000) STM-16 MADM / MSTP optical transmission system (hereinafter referred to as the OptiX 2500 +) device is a multi-service transport platform (MSTP) equipment. The device is the SDH / ATM / Ethernet / DWDM technology integration; it not only has SDH equipment and flexible networking and service scheduling capability (MADM), but also can through 2-layers’ data services, achieve ATM /

Contact Us Functions and Features The N64/N64Q/FP2D accesses Nx64 kbit/s services and Framed E1 services. The N64/N64Q is an Nx64 kbit/s interface board. The N64/N64Q transmits, receives, and processes multi-protocol physical interface services. The N64 can convert two V.35/V.24/X.21/RS-449/EIA-530 signals and two Framed E1 signals into E1 signals at the same time, map the E1 signals into VC-4s, and send the VC-4 signals to the cross-connect unit. The N64 can also consolidate

Contact Us Functions and Features The SLQ4 transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ4. Table 1 Functions and features of the SLQ4 Function and Feature SLQ4 Basic functions Transmits and receives 4xSTM-4 optical signals. Specifications of the optical interface Supports different types of

Contact Us Functions and Features EMS2 boards support the Layer 2 switching, link convergence, and multicast functions. Table 1 lists the functions and features supported by EMS2 boards. Table 1 Functions and features supported by EMS2 boards Function and Feature Description Basic functions Receives/Transmits and processes 2xGE and 16xFE services. Port types Supports 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function in