Huawei Optical Transceiver

Contact Us 03052349 OSN 1500 SSND00EGS413 EGS13 EGS4 4 way switched gigabit Ethernet processing board (1000-1000 base - VX) • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met.

Contact Us Functions and Features The EU04 receives and transmits 4xSTM-1 electrical signals. The EU04 must work with the SEP. Technical Specifications of the EU04 The technical specifications of the EU04 include the parameters specified for electrical interfaces, mechanical specifications, and power consumption. Parameters Specified for Interfaces Table 1 lists the parameters specified for the electrical interfaces of the EU04. Table 1 Specifications of the ports Port type

Source SPS-43-48H-HP-TDE-EN2 SFP XCVR OLT GPON RDH90145/1 FE-SFP optical transceiver S-SFP-FE-LH40-SM1310 Optical transceiver, eSFP, FE, single-mode module (1310 nm, 40 km, LC)S-SFP-FE-LH80-SM1550 Optical transceiver, eSFP, FE, single-mode module (1550 nm, 80 km, LC)GE-SFP optical transceiver SFP-1000BaseT Copper transceiver, SFP, GE, electrical interface module (100 m, RJ45)eSFP-GE-SX-MM850 Optical transceiver, eSFP, GE, multimode module (850 nm, 0.5 km, LC)SFP-GE-LX-SM1310

Contact Us Functions and Features The SLO1 transmits and receives 8xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLO1. Table 1 Functions and features of the SLO1 board Function and Feature SLO1 Basic functions Receives and transmits 8xSTM-1 optical signals. Specifications of the optical interface Supports different

Contact Us Functions and Features EGT2 boards support the transparent transmission of Ethernet services, LCAS function, and test frames. Table 1 lists the functions and features supported by EGT2 boards. Table 1 Functions and features supported by EGT2 boards Function and Feature Description Basic functions Transparently transmits 2xGE services. Port types EGT2 boards support 1000BASE-SX/LX/ZX/VX Ethernet optical ports. The optical ports support the auto-negotiation function

Contact Us 02120283 SDH OptiX OSN 3500 SSEE1RFB 1RFB remote pump fan box Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards Highly reliable design 1+1 hot backup for power supply

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.com Specifications Item Description Part Number 02310CRM Version Support Supported in V100R001C00 and later versions Transceiver form factor SFP+ Transmission speed 10GE Center wavelength (nm) 1310 Standard compliance 10GBASE-LRM Connector type LC Applicable cable and maximum transmission distance Multimode fiber (with diameter of 62.5 μm): 220m Multimode fiber (OM1) (with

UONEL CO LIMITEDContact person:NatashaMobile/Whatsapp/Skype/Wechat:+86 13798264392Website:www.uonel.comwww.uonel-telecom.com Specifications Item Description Part Number 02310CRM Version Support Supported in V100R001C00 and later versions Transceiver form factor SFP+ Transmission speed 10GE Center wavelength (nm) 1310 Standard compliance 10GBASE-LRM Connector type LC Applicable cable and maximum transmission distance Multimode fiber (with diameter of 62.5 μm): 220m Multimode

Contact Us Functions and Features The AIUD/AIUQ supports ATM switching and ATM protection. The AIUD supports two external ports and two internal ports. The AIUQ supports four external ports and four internal ports. The AIUD/AIUQ accesses a maximum of 155 Mbit/s ATM services. The ATM service is accessed by the optical fiber and is in the SDH frame structure. The payload is the ATM service. The AIUD/AIUQ multiplexes and maps the ATM service, loads the ATM service into SDH VC-4s

Contact Us Functions and Features The SLD4A transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLD4A. Table 1 Functions and features of the SLD4A Function and Feature SLD4A Basic functions Receives and transmits 2xSTM-4 optical signals, and processes 2xSTM-4 standard or concatenation services.

Contact Us The OI2S, OI2D, SL1Q, and SL1O boards access STM-1 signals. Functions Accesses STM-1 optical signals. Provides four types of optical interfaces: Ie-1, S-1.1, L-1.1 and L-1.2. The OI2S and OI2D boards can provide the synchronous clock source for the clock unit. Supports MSP and SNCP. Supports the ALS function. Provides DCCs and orderwire communication. Supports inloop and outloop. The OI2S and OI2D boards supports the pluggable optical module. Table 1 lists the

Contact Us Functions and Features The SLQ4A transmits and receives STM-4 optical signals, performs O/E conversion for the STM-4 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLQ4A. Table 1 Functions and features of the SLQ4A Function and Feature SLQ4A Basic functions Transmits and receives 4xSTM-4 optical signals. Specifications of the optical interface Supports different types

Contact Us Functions and Features The SLO1 transmits and receives 8xSTM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SLO1. Table 1 Functions and features of the SLO1 board Function and Feature SLO1 Basic functions Receives and transmits 8xSTM-1 optical signals. Specifications of the optical interface Supports different

Contact Us Huawei EFS SS42EFS SS42EFS01 03036945 4-ports fast Ethernet electrical interface board for HUAWEI OptiX Metro 1000 Metro1000• OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can

Original 10G-1550nm-40km-SM-XFP STM64-LH40-SM1550 02315209 FE-SFP optical transceiver S-SFP-FE-LH40-SM1310 Optical transceiver, eSFP, FE, single-mode module (1310 nm, 40 km, LC)S-SFP-FE-LH80-SM1550 Optical transceiver, eSFP, FE, single-mode module (1550 nm, 80 km, LC) GE-SFP optical transceiver SFP-1000BaseT Copper transceiver, SFP, GE, electrical interface module (100 m, RJ45)eSFP-GE-SX-MM850 Optical transceiver, eSFP, GE, multimode module (850 nm, 0.5 km, LC)SFP-GE-LX

Contact Us 03052454 SDH device OSN3500 SSN1SL1A SL1A STM 1 optical interface board (S - 1.1, LC) Sub-rack construction of OSN3500 • Network status and the application of OSN3500 Specifications OptiX OSN3500 System Features Subrack dimensions 498mm(W) X 287mm (D)X 700mm (H) Switching capacity Packet: 100 Gbit/s. TDM: 200 Gbit/s (high order), 20 Gbit/s (low order) Service slots 15 slots for processing boards and 16 slots for interface boards Highly reliable design 1+1 hot

Contact Us UONEL CO LIMITED Contact person:Natasha Mobile/Whatsapp/Skype/Wechat:+86 13798264392 Website:www.uonel.com www.uonel-telecom.com 03050935 OptiX OSN3500 SSN2EGR2 (1000BASE-LX,1310-LC) EGR2 two lines of gigabit Ethernet ring network processing board • OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes

Original SFP Huawei 10G-40Km-1550nm-SM-XFP SSX1T2XP 34060322 Huawei TransceiversPart numberDescriptionSFP-FE-SX-MM1310-SFP-100M/155M-(1310nm,2km,LC)eSFP-FE-LX-SM1310-eSFP-100M/155M-(1310nm,15km,LC)S-SFP-FE-LH40-SM1310-eSFP-FE-(1310nm,40km,LC)S-SFP-FE-LH80-SM1550-eSFP-FE-(1550nm,80km,LC)OST015N00-eSFP-622M-(1310nm,15km,LC)OST040N00-eSFP-622M-(1310nm,40km,LC)OST080N00-eSFP-622M-(1550nm,80km,LC)SFP-1000BaseT-SFP-GE-(100m,RJ45)eSFP-GE-SX-MM850-eSFP-GE-(850nm,0.5km,LC)SFP-GE-LX

Contact Us Functions and Features The ADQ1 supports the ATM switching and ATM protection. Table 1 provides the functions and features of the ADQ1. Table 1 Functions and features of the ADQ1 Function and Feature ADQ1 Basic functions Transmits/Receives and processes 4xSTM-1 ATM services. Type of optical interface Supports different types of standard optical interfaces, namely, the Ie-1, S-1.1, L-1.1, L-1.2, and Ve-1.2. The characteristics of the optical interfaces of the S-1.1,

Contact Us The SL1 transmits and receives STM-1 optical signals, performs O/E conversion for the STM-1 optical signals, extracts and inserts overhead bytes, and generates alarm signals on the line. Table 1 provides the functions and features of the SL1. Table 1 Functions and features of the SL1 Function and Feature SL1 Basic functions Transmits and receives 1xSTM-1 optical signals. Specifications of the optical interface Supports different types of standard optical interfaces