Static Eliminator Bar

ionization for the elimination of electrostatic charges Ionizing static bar The intelligent electrostatic eliminator is different from the traditional electrostatic stick. It has an intelligent adjustment chip, which can adjust the size of static electricity according to the size of static electricity on the surface of the object, balance static electricity in a real sense, and keep the static electricity in the production environment at a low level for a long time. It is an

Electrostatic ion removing wind rod anti static equipment for Electronics industry In the electronic industry, static electricity will absorb dust, causing pollution to integrated circuits and semiconductor components, and greatly reducing the yield. The QP-S35 electrostatic rod produced by QEEPO can effectively solve the electrostatic hazard, and the low balance of electrostatic ions will not cause damage to components. Technical Parameter TYPE QP-S35A QP-S35AH QP-S35W QP

Ion Bar Industrial Electrostatic Removal Equipment Static Eliminator Device Static electricity will cause great harm in industrial production, such as breakdown of integrated circuits and precision electronic components, or aging of components, reducing the yield of finished products; QP-S35 integrated intelligent static eliminator is professional in static removal, with integrated design, fast static removal, safety and reliability. Technical Parameter TYPE QP-S35A QP-S35AH

Printer Electrostatic Elimination Device Printer Flying Ink Problem Solving The printer is an indispensable equipment for enterprise office work. However, due to the interference of static electricity, many problems will be caused, such as computer crash, paper jam, etc. The effect of static electricity on the printer is very great, and serious damage may occur to the motherboard and nozzle. This will reduce the service life of the printer for a long time. However, if the

Quickly Static Remove Speed Industrial Static Ionizing Bar With High Generator Power Supply The new QP-ES is fast in static removal, and can be used with high-voltage power supply. It is easy to install, and the length can be customized. It is delivered directly by the manufacturer TYPE QP-ES Working voltage MAX 7Kv AC Working current MAX 5mA working frequency 50/60Hz operation mode Power frequency AC Working distance 3~30cm Working humidity 0 ~ 70% RH (no freezing, no

QP-S66 esd air ionizer static charge remover anti static bar for printing In ( electrostatic discharge, ESD) test, a lot of pins printers have various EMC problems, such as screaming, error printing, error movement, figured screen, and stop printing, and so on. QP-S66 static bar can effectively solve the static problem of the printer. It is easy to install, fast in static removal, safe and reliable Performance Parameters: TYPE Item QP-S66 input voltage 24VDC±10% Rated current

QP-S35 ionizer static eliminator bar anti static bars for balances Intelligent static eliminator can display static voltage in real time, connect sensors for real-time dynamic detection, intelligently eliminate static electricity, and remove static electricity quickly and conveniently. Technical Parameter TYPE QP-S35A QP-S35AH QP-S35W QP-S35HW structure model High balance Encryption type High balance Encryption type Needle pitch 50mm 25mm 50mm 25mm Auxiliary gas yes Buffer

DC 24V ionizing bar static eliminator static elimination bars for industrial Long distance static electricity removal, integrated design, easy to use, size can be customized, direct sales by manufacturers, price concessions MODEL QP-F66 Input voltage 24V DC (20-32V DC) Section size 26.4*44.4mm Input current ≤1A Discharge electrode material SS. Working voltage +/- 7~12KV DC Working distance 50~400mm Working frequency 10Hz Work proportion 40%:60%(POS:NEG) Working temperature 0℃

static electricity elimination ionizer bar antistatic bar Long distance industrial electrostatic removal, fast electrostatic removal, strong energy, convenient installation, size can be customized according to customer environment MODEL QP-F66 Input voltage 24V DC (20-32V DC) Section size 26.4*44.4mm Input current ≤1A Discharge electrode material SS. Working voltage +/- 7~12KV DC Working distance 50~400mm Working frequency 10Hz Work proportion 40%:60%(POS:NEG) Working

static eliminator ionizer anti static bar with high voltage generator QP-ES is an electrostatic eliminator with a wide range of applications. It consists of an electrostatic rod and a high-voltage generator. It has fast electrostatic removal speed, low price, and simple and convenient installation Features: 1, Prevent electric shock design,use of safe； 2, High strength alloy material with fine appearance； 3, Excellent destatic performance, widely applicable scope; 4, Using

static electricity removal device anti static eliminator ion bar QP-ES is a high-performance and cost-effective static eliminator, with a static removal speed of 0.1S, simple installation, and long service life when connected to a high-voltage power supply problem Film extrusion or film blowing lines usually have very high static electricity exceeding 200kV, which can cause the following problems: Operators suffer from electric shock, causing discomfort High static film sound

DC 24V intelligent static charge eliminator ionizing bar printer ion bar The static electricity of the printer will affect the quality of the product. QP-S66 can effectively solve the static electricity problem of the printer. It is easy to install. The integrated power supply design is convenient for use and installation. Performance Parameters: TYPE Item QP-S66 input voltage 24VDC±10% Rated current 1A Ion balance ±30V Speed of removing static electricity 0.1S Needle spacing

intelligent electrostatic eliminator ionizer anti static bar with static sensor Integrated intelligent static eliminator, more intelligent static electricity removal, real-time static electricity display, fast static electricity removal speed, real-time detection of object surface static electricity with sensors, suitable for electronic field static electricity removal. Technical Parameter TYPE QP-S35A QP-S35AH QP-S35W QP-S35HW structure model High balance Encryption type

QP-ES anti static ionizer bar static electricity removal device with power supply Ionizing bars designed to control static charge in mini-environments, laminar flow hoods & workstations. Cost-effective, high-performance ionizers to eliminate static charge in various applications Features: 1, Prevent electric shock design,use of safe； 2, High strength alloy material with fine appearance； 3, Excellent destatic performance, widely applicable scope; 4, Using special technology to

Long Distance Industrial Electrostatic Rod Electrostatic Elimination Equipment QP-F66 electrostatic eliminator, DC24V input, anti shock design, output voltage+/- 7 to 12 kv, double row discharge electrode design, long electrostatic removal distance, safe and reliable, simple installation, suitable for industrial electrostatic control. MODEL QP-F66 Input voltage 24V DC (20-32V DC) Section size 26.4*44.4mm Input current ≤1A Discharge electrode material SS. Working voltage +/- 7

Customized Length Static Elimination Bar With High Voltage Generator There will be static electricity in the EVA adhesive film extrusion production line, which will seriously affect the product quality. Therefore, adding an electrostatic eliminator on the production line is one of the ways to solve the problem. Qp-es is a safe and split electrostatic eliminator produced by Qipu electrostatic production. It is safe and reliable. It is used together with high-voltage generator.

Integrated Power Supply Pulsed DC Static Eliminator Ionising Bar QP-F66 pulse DC static eliminator is a product independently developed and produced by our company, which is suitable for medium distance and can eliminate static electricity without passing compressed air. It has a variety of adjustment, protection and indication functions; The product adopts an integrated design, which can be directly used with 24V DC input, reducing various effects caused by high-voltage wire

Long Range Anti Static Eliminator Bar On Re-Winders With Lay-On Rollers QP-F66 pulsed DC electrostatic rod, which can remove static electricity from a long distance without air source, is designed with double row discharge electrodes, which is fast in removing static electricity, long in distance, simple in installation, and suitable for removing static electricity in industrial environments MODEL QP-F66 Input voltage 24V DC (20-32V DC) Section size 26.4*44.4mm Input current

+/- 7 to 12KV Pulse DC static ionizer eliminator bar for industrial static control technology QP-F66 electrostatic eliminator, DC24V input, anti shock design, output voltage+/- 7 to 12 kv, long electrostatic removal distance, safe and reliable, suitable for industrial electrostatic control. MODEL QP-F66 Input voltage 24V DC (20-32V DC) Section size 26.4*44.4mm Input current ≤1A Discharge electrode material SS. Working voltage +/- 7~12KV DC Working distance 50~400mm Working

Intelligent Anti Static Ionization Bar Ionizers Neutralize Static Charge For Electronics industry The intelligent electrostatic eliminator is different from the traditional electrostatic stick. It has an intelligent adjustment chip, which can adjust the size of static electricity according to the size of static electricity on the surface of the object, balance static electricity in a real sense, and keep the static electricity in the production environment at a low level for